mb/google/skyrim/var/markarth: Update devicetree setting

Update devicetree based on the schematic_20230105.

BUG=b:263534907, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot

Change-Id: I437425ac4a7cdb883dc213f5f6bb5f8a33a5577b
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71714
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>

1 files changed, 115 insertions, 1 deletions

diff --git a/src/mainboard/google/skyrim/variants/markarth/overridetree.cb b/src/mainboard/google/skyrim/variants/markarth/overridetree.cb
index 7a56f9375948..f8e5268aeac0 100644
--- a/src/mainboard/google/skyrim/variants/markarth/overridetree.cb
+++ b/src/mainboard/google/skyrim/variants/markarth/overridetree.cb
@@ -1,5 +1,119 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
 chip soc/amd/mendocino
-	device domain 0 on end
+
+	device domain 0 on
+		device ref gpp_bridge_1 on
+			# Required so the NVMe gets placed into D3 when entering S0i3.
+			chip drivers/pcie/rtd3/device
+				register "name" = ""NVME""
+				device pci 00.0 on end
+			end
+		end # NVME
+		device ref gpp_bridge_2 on
+			# Required so the NVMe gets placed into D3 when entering S0i3.
+			chip drivers/pcie/rtd3/device
+				register "name" = ""NVME""
+				device pci 00.0 on end
+			end
+		end # NVME
+
+		device ref gpp_bridge_a on  # Internal GPP Bridge 0 to Bus A
+			device ref xhci_1 on # XHCI1 controller
+				chip drivers/usb/acpi
+					device ref xhci_1_root_hub on # XHCI1 root hub
+						chip drivers/usb/acpi
+							device ref usb3_port3 on # USB 3.1 port3
+								chip drivers/usb/acpi
+									register "desc" = ""USB3 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
+									device usb 3.1 on end
+								end
+							end # USB 3.1 port3
+						end
+						chip drivers/usb/acpi
+							device ref usb2_port3 on # USB 2 port3
+								chip drivers/usb/acpi
+									register "desc" = ""USB2 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
+									device usb 2.1 on end
+								end
+							end # USB 2 port3
+						end
+					end # XHCI1 root hub
+				end
+			end # XHCI1 controller
+		end # Internal GPP Bridge 0 to Bus A
+	end # domain
+
+	device ref i2c_0 on
+		chip drivers/i2c/generic
+			register "hid" = ""ELAN0000""
+			register "desc" = ""ELAN Touchpad""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_40)"
+			register "wake" = "GEVENT_20"
+			register "detect" = "1"
+			device i2c 15 on end
+		end
+		chip drivers/i2c/hid
+			register "generic.hid" = ""SYNA0000""
+			register "generic.cid" = ""ACPI0C50""
+			register "generic.desc" = ""Synaptics Touchpad""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_40)"
+			register "generic.wake" = "GEVENT_20"
+			register "generic.detect" = "1"
+			register "hid_desc_reg_offset" = "0x20"
+			device i2c 2c on end
+		end
+	end # I2C0
+	device ref i2c_1 on
+		chip drivers/i2c/hid
+			register "generic.hid" = ""ELAN9004""
+			register "generic.desc" = ""ELAN Touchscreen""
+			register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_29)"
+			register "generic.detect" = "1"
+			register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_131)"
+			register "generic.enable_delay_ms" = "10"
+			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_136)"
+			register "generic.reset_off_delay_ms" = "1"
+			register "generic.reset_delay_ms" = "10"
+			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)"
+			register "generic.stop_delay_ms" = "180"
+			register "generic.stop_off_delay_ms" = "1"
+			register "generic.has_power_resource" = "1"
+			register "hid_desc_reg_offset" = "0x01"
+			device i2c 10 on end
+		end
+	end # I2C1
+	device ref i2c_2 on
+		chip drivers/i2c/generic
+			register "hid" = ""RTL5682""
+			register "name" = ""RT58""
+			register "desc" = ""Realtek RT5682""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
+			register "property_count" = "1"
+			register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+			register "property_list[0].name" = ""realtek,jd-src""
+			register "property_list[0].integer" = "1"
+			device i2c 1a on end
+		end
+		chip drivers/i2c/generic
+			register "hid" = ""10EC1019""
+			register "desc" = ""Realtek SPK AMP R""
+			register "uid" = "1"
+			device i2c 29 on end
+		end
+		chip drivers/i2c/generic
+			register "hid" = ""10EC1019""
+			register "desc" = ""Realtek SPK AMP L""
+			register "uid" = "2"
+			register "probed" = "1"
+			device i2c 2a on end
+		end
+	end # I2C2
+
 end	# chip soc/amd/mendocino