diff options
author | Vadim Bendebury <vbendeb@chromium.org> | 2014-05-27 18:28:59 -0700 |
---|---|---|
committer | Marc Jones <marc.jones@se-eng.com> | 2015-01-06 16:57:30 +0100 |
commit | 897123ab2f3bcde00848ae622faeb2ca1e7004f0 (patch) | |
tree | 22cbe519a1a71e28199537f265fa89e268d4e775 /payloads | |
parent | bc8b4fad1eae6b97b23304871fcdee43c8f360f1 (diff) | |
download | coreboot-897123ab2f3bcde00848ae622faeb2ca1e7004f0.tar.gz coreboot-897123ab2f3bcde00848ae622faeb2ca1e7004f0.tar.bz2 coreboot-897123ab2f3bcde00848ae622faeb2ca1e7004f0.zip |
libpayload: ipq808x: introduce uart driver
This adds a UART driver for the ipq8064 controller. It still does not
quite work in the receive direction - the receive FIFO returns read
data in 32 bit chunks, which means that 4 keys need to be pressed
before a character pops out of the driver (and it reports it as a
single character).
This issue is being addressed separately, the driver is being checked
in to facilitate concurrent development.
BUG=chrome-os-partner:27784, chrome-os-partner:29313
TEST=with deptcharge modifications in place, the AP148 board comes up
to the depthcharge prompt:
Starting depthcharge on storm...
Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202045
Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc
Reviewed-on: http://review.coreboot.org/8061
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'payloads')
-rw-r--r-- | payloads/libpayload/Config.in | 5 | ||||
-rw-r--r-- | payloads/libpayload/configs/defconfig | 5 | ||||
-rw-r--r-- | payloads/libpayload/configs/defconfig-arm | 3 | ||||
-rw-r--r-- | payloads/libpayload/drivers/Makefile.inc | 1 | ||||
-rw-r--r-- | payloads/libpayload/drivers/serial/ipq806x.c | 363 |
5 files changed, 375 insertions, 2 deletions
diff --git a/payloads/libpayload/Config.in b/payloads/libpayload/Config.in index 3c5c34209825..f943cb6cba9d 100644 --- a/payloads/libpayload/Config.in +++ b/payloads/libpayload/Config.in @@ -178,6 +178,11 @@ config TEGRA_SERIAL_CONSOLE depends on SERIAL_CONSOLE default n +config IPQ806X_SERIAL_CONSOLE + bool "IPQ806x SOC compatible serial port driver" + depends on SERIAL_CONSOLE + default n + config PL011_SERIAL_CONSOLE bool "PL011 compatible serial port driver" depends on 8250_SERIAL_CONSOLE diff --git a/payloads/libpayload/configs/defconfig b/payloads/libpayload/configs/defconfig index 78f3808101fb..208bf38d2877 100644 --- a/payloads/libpayload/configs/defconfig +++ b/payloads/libpayload/configs/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # libpayload version: 0.2.0 -# Wed Nov 12 14:25:19 2014 +# Wed Dec 31 11:36:31 2014 # # @@ -39,6 +39,8 @@ CONFIG_LP_SERIAL_CONSOLE=y CONFIG_LP_8250_SERIAL_CONSOLE=y # CONFIG_LP_S5P_SERIAL_CONSOLE is not set # CONFIG_LP_TEGRA_SERIAL_CONSOLE is not set +# CONFIG_LP_IPQ806X_SERIAL_CONSOLE is not set +# CONFIG_LP_PL011_SERIAL_CONSOLE is not set CONFIG_LP_SERIAL_IOBASE=0x3f8 # CONFIG_LP_SERIAL_SET_SPEED is not set # CONFIG_LP_SERIAL_ACS_FALLBACK is not set @@ -63,6 +65,7 @@ CONFIG_LP_STORAGE_ATA=y CONFIG_LP_STORAGE_ATAPI=y CONFIG_LP_STORAGE_AHCI=y CONFIG_LP_STORAGE_AHCI_ONLY_TESTED=y +CONFIG_LP_TIMER_RDTSC=y CONFIG_LP_USB=y CONFIG_LP_USB_UHCI=y CONFIG_LP_USB_OHCI=y diff --git a/payloads/libpayload/configs/defconfig-arm b/payloads/libpayload/configs/defconfig-arm index 83731bb6b972..1d4fcb018273 100644 --- a/payloads/libpayload/configs/defconfig-arm +++ b/payloads/libpayload/configs/defconfig-arm @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # libpayload version: 0.2.0 -# Wed Dec 31 11:11:44 2014 +# Wed Dec 31 11:37:12 2014 # # @@ -38,6 +38,7 @@ CONFIG_LP_SERIAL_CONSOLE=y # CONFIG_LP_8250_SERIAL_CONSOLE is not set # CONFIG_LP_S5P_SERIAL_CONSOLE is not set # CONFIG_LP_TEGRA_SERIAL_CONSOLE is not set +# CONFIG_LP_IPQ806X_SERIAL_CONSOLE is not set # CONFIG_LP_SERIAL_SET_SPEED is not set # CONFIG_LP_SERIAL_ACS_FALLBACK is not set CONFIG_LP_VIDEO_CONSOLE=y diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc index d46bb1154129..538a8a61c45b 100644 --- a/payloads/libpayload/drivers/Makefile.inc +++ b/payloads/libpayload/drivers/Makefile.inc @@ -36,6 +36,7 @@ libc-$(CONFIG_LP_SPEAKER) += speaker.c libc-$(CONFIG_LP_8250_SERIAL_CONSOLE) += serial/8250.c libc-$(CONFIG_LP_S5P_SERIAL_CONSOLE) += serial/s5p.c libc-$(CONFIG_LP_TEGRA_SERIAL_CONSOLE) += serial/tegra.c +libc-$(CONFIG_LP_IPQ806X_SERIAL_CONSOLE) += serial/ipq806x.c libc-$(CONFIG_LP_PC_KEYBOARD) += keyboard.c diff --git a/payloads/libpayload/drivers/serial/ipq806x.c b/payloads/libpayload/drivers/serial/ipq806x.c new file mode 100644 index 000000000000..834389ec0eeb --- /dev/null +++ b/payloads/libpayload/drivers/serial/ipq806x.c @@ -0,0 +1,363 @@ +/* + * Copyright (c) 2014 Chromium OS authors + */ + +#include <libpayload.h> + +enum IPQ_UART_DM_PARITY_MODE { + IPQ_UART_DM_NO_PARITY, + IPQ_UART_DM_ODD_PARITY, + IPQ_UART_DM_EVEN_PARITY, + IPQ_UART_DM_SPACE_PARITY +}; + +/* UART Stop Bit Length */ +enum IPQ_UART_DM_STOP_BIT_LEN { + IPQ_UART_DM_SBL_9_16, + IPQ_UART_DM_SBL_1, + IPQ_UART_DM_SBL_1_9_16, + IPQ_UART_DM_SBL_2 +}; + +/* UART Bits per Char */ +enum IPQ_UART_DM_BITS_PER_CHAR { + IPQ_UART_DM_5_BPS, + IPQ_UART_DM_6_BPS, + IPQ_UART_DM_7_BPS, + IPQ_UART_DM_8_BPS +}; + +#define IPQ_UART_DM_CR(base) (((u8 *)(base)) + 0x10) +#define IPQ_UART_DM_DMEN(base) (((u8 *)(base)) + 0x3C) +#define IPQ_UART_DM_DMRX(base) (((u8 *)(base)) + 0x34) +#define IPQ_UART_DM_HCR(base) (((u8 *)(base)) + 0x24) +#define IPQ_UART_DM_IMR(base) (((u8 *)(base)) + 0x14) +#define IPQ_UART_DM_IPR(base) (((u8 *)(base)) + 0x18) +#define IPQ_UART_DM_IRDA(base) (((u8 *)(base)) + 0x38) +#define IPQ_UART_DM_MISR(base) (((u8 *)(base)) + 0x10) +#define IPQ_UART_DM_MR1(base) (((u8 *)(base)) + 0x00) +#define IPQ_UART_DM_MR2(base) (((u8 *)(base)) + 0x04) +#define IPQ_UART_DM_NO_CHARS_FOR_TX(base) (((u8 *)(base)) + 0x040) +#define IPQ_UART_DM_RF(base, x) (((u8 *)(base)) + 0x70 + 4*(x)) +#define IPQ_UART_DM_RFWR(base) (((u8 *)(base)) + 0x20) +#define IPQ_UART_DM_RX_TOTAL_SNAP(base) (((u8 *)(base)) + 0x38) +#define IPQ_UART_DM_SR(base) (((u8 *)(base)) + 0x008) +#define IPQ_UART_DM_TF(base, x) (((u8 *)(base)) + 0x70 + 4*(x)) +#define IPQ_UART_DM_TFWR(base) (((u8 *)(base)) + 0x1C) + +#define IPQ_UART_DM_TXLEV (1 << 0) +#define IPQ_UART_DM_TX_READY (1 << 7) + +#define IPQ_UART_DM_CR_CH_CMD_LSB(x) ((x & 0x0f) << 4) +#define IPQ_UART_DM_CR_CH_CMD_MSB(x) ((x >> 4 ) << 11 ) +#define IPQ_UART_DM_CR_CH_CMD(x) (IPQ_UART_DM_CR_CH_CMD_LSB(x)\ + | IPQ_UART_DM_CR_CH_CMD_MSB(x)) + +#define IPQ_UART_DM_CR_GENERAL_CMD(x) ((x) << 8) + +#define IPQ_UART_DM_8_N_1_MODE (IPQ_UART_DM_NO_PARITY | \ + (IPQ_UART_DM_SBL_1 << 2) | \ + (IPQ_UART_DM_8_BPS << 4)) +#define IPQ_UART_DM_CR_RX_ENABLE (1 << 0) +#define IPQ_UART_DM_CR_TX_ENABLE (1 << 2) +#define IPQ_UART_DM_CMD_RESET_RX IPQ_UART_DM_CR_CH_CMD(1) +#define IPQ_UART_DM_CMD_RESET_TX IPQ_UART_DM_CR_CH_CMD(2) +#define IPQ_UART_DM_CMD_RESET_ERR_STAT IPQ_UART_DM_CR_CH_CMD(3) +#define IPQ_UART_DM_CMD_RES_STALE_INT IPQ_UART_DM_CR_CH_CMD(8) +#define IPQ_UART_DM_CMD_RES_TX_ERR IPQ_UART_DM_CR_CH_CMD(10) +#define IPQ_UART_DM_GCMD_ENA_STALE_EVT IPQ_UART_DM_CR_GENERAL_CMD(5) +#define IPQ_UART_DM_RXSTALE (1 << 3) +#define IPQ_UART_DM_IMR_ENABLED (IPQ_UART_DM_TX_READY | \ + IPQ_UART_DM_TXLEV | \ + IPQ_UART_DM_RXSTALE) +#define IPQ_UART_DM_TFW_VALUE 0 +#define IPQ_UART_DM_RFW_VALUE 1 +#define IPQ_UART_DM_DMRX_DEF_VALUE 0x220 +#define IPQ_UART_DM_SR_TXEMT (1 << 3) +#define IPQ_UART_DM_SR_UART_OVERRUN (1 << 4) +#define IPQ_UART_DM_E_SUCCESS 0 +#define IPQ_UART_DM_E_INVAL 3 +#define IPQ_UART_DM_E_RX_NOT_READY 5 + +#define IPQ_UART_DM_STALE_TIMEOUT_LSB 0x0f + +static struct console_input_driver consin = {}; +static struct console_output_driver consout = {}; + +#define FIFO_DATA_SIZE 4 + +static void *base_uart_addr; + +/* + * All constants lifted from u-boot's + * board/qcom/ipq806x_cdp/ipq806x_board_param.h + */ +static unsigned int msm_boot_uart_dm_init(void *uart_dm_base); + +/* Number of pending received characters */ +static int uart_ready_data_count; + +/* Received data as it came from 32 bit wide FIFO */ +static unsigned int uart_rx_fifo_word; + +/** + * msm_boot_uart_dm_init_rx_transfer - Init Rx transfer + * @uart_dm_base: UART controller base address + */ +static unsigned int msm_boot_uart_dm_init_rx_transfer(void *uart_dm_base) +{ + /* Reset receiver */ + writel(IPQ_UART_DM_CMD_RESET_RX, + IPQ_UART_DM_CR(uart_dm_base)); + + /* Enable receiver */ + writel(IPQ_UART_DM_CR_RX_ENABLE, + IPQ_UART_DM_CR(uart_dm_base)); + writel(IPQ_UART_DM_DMRX_DEF_VALUE, + IPQ_UART_DM_DMRX(uart_dm_base)); + + /* Clear stale event */ + writel(IPQ_UART_DM_CMD_RES_STALE_INT, + IPQ_UART_DM_CR(uart_dm_base)); + + /* Enable stale event */ + writel(IPQ_UART_DM_GCMD_ENA_STALE_EVT, + IPQ_UART_DM_CR(uart_dm_base)); + + return IPQ_UART_DM_E_SUCCESS; +} + +/** + * Reads a word from the RX FIFO or returns not ready. + */ +static unsigned msm_boot_uart_dm_read(void) +{ + static int total_rx_data = 0; + static int rx_data_read = 0; + void *base = base_uart_addr; + uint32_t status_reg; + + /* RXSTALE means RX FIFO is not empty. */ + status_reg = readl(IPQ_UART_DM_MISR(base)); + if (!(status_reg & IPQ_UART_DM_RXSTALE)) + return IPQ_UART_DM_E_RX_NOT_READY; + + /* Check for Overrun error. We'll just reset Error Status */ + if (readl(IPQ_UART_DM_SR(base)) & + IPQ_UART_DM_SR_UART_OVERRUN) { + writel(IPQ_UART_DM_CMD_RESET_ERR_STAT, + IPQ_UART_DM_CR(base)); + total_rx_data = rx_data_read = 0; + msm_boot_uart_dm_init(base); + return IPQ_UART_DM_E_RX_NOT_READY; + } + + /* Clear stale event. */ + writel(IPQ_UART_DM_CMD_RES_STALE_INT, IPQ_UART_DM_CR(base)); + + /* Read UART_DM_RX_TOTAL_SNAP for actual number of bytes received */ + if (total_rx_data == 0) + total_rx_data = readl(IPQ_UART_DM_RX_TOTAL_SNAP(base)); + + /* Data available in FIFO; read a word. */ + uart_rx_fifo_word = readl(IPQ_UART_DM_RF(base, 0)); + + /* + * TODO(vbendeb): this is wrong and will be addressed shortly: there + * should be no zeros returned from the FIFO in case there are + * received characters (we don't expect to be receiving zeros). + * See http://crosbug.com/p/29313 + */ + if (uart_rx_fifo_word == 0) { + return IPQ_UART_DM_E_RX_NOT_READY; + } + + /* increment the total count of chars we've read so far */ + rx_data_read += FIFO_DATA_SIZE; + + /* Actual count of valid data in word */ + uart_ready_data_count = + ((total_rx_data < rx_data_read) ? + (FIFO_DATA_SIZE - (rx_data_read - total_rx_data)) : + FIFO_DATA_SIZE); + + /* If there are still data left in FIFO we'll read them before + * initializing RX Transfer again + */ + if (rx_data_read < total_rx_data) + return IPQ_UART_DM_E_SUCCESS; + + msm_boot_uart_dm_init_rx_transfer(base); + total_rx_data = rx_data_read = 0; + + return IPQ_UART_DM_E_SUCCESS; +} + +void serial_putchar(unsigned data) +{ + int num_of_chars = 0; + unsigned tx_data = 0; + void *base = base_uart_addr; + + if (data == '\n') { + num_of_chars++; + tx_data = '\r'; + } + + tx_data |= data << (8 * num_of_chars++); + + /* Wait until transmit FIFO is empty. */ + while (!(readl(IPQ_UART_DM_SR(base)) & + IPQ_UART_DM_SR_TXEMT)) + udelay(1); + + /* + * TX FIFO is ready to accept new character(s). First write number of + * characters to be transmitted. + */ + writel(num_of_chars, IPQ_UART_DM_NO_CHARS_FOR_TX(base)); + + /* And now write the character(s) */ + writel(tx_data, IPQ_UART_DM_TF(base, 0)); +} + +/* + * msm_boot_uart_dm_reset - resets UART controller + * @base: UART controller base address + */ +static unsigned int msm_boot_uart_dm_reset(void *base) +{ + writel(IPQ_UART_DM_CMD_RESET_RX, IPQ_UART_DM_CR(base)); + writel(IPQ_UART_DM_CMD_RESET_TX, IPQ_UART_DM_CR(base)); + writel(IPQ_UART_DM_CMD_RESET_ERR_STAT, + IPQ_UART_DM_CR(base)); + writel(IPQ_UART_DM_CMD_RES_TX_ERR, IPQ_UART_DM_CR(base)); + writel(IPQ_UART_DM_CMD_RES_STALE_INT, IPQ_UART_DM_CR(base)); + + return IPQ_UART_DM_E_SUCCESS; +} + +/* + * msm_boot_uart_dm_init - initilaizes UART controller + * @uart_dm_base: UART controller base address + */ +static unsigned int msm_boot_uart_dm_init(void *uart_dm_base) +{ + /* Configure UART mode registers MR1 and MR2 */ + /* Hardware flow control isn't supported */ + writel(0x0, IPQ_UART_DM_MR1(uart_dm_base)); + + /* 8-N-1 configuration: 8 data bits - No parity - 1 stop bit */ + writel(IPQ_UART_DM_8_N_1_MODE, + IPQ_UART_DM_MR2(uart_dm_base)); + + /* Configure Interrupt Mask register IMR */ + writel(IPQ_UART_DM_IMR_ENABLED, + IPQ_UART_DM_IMR(uart_dm_base)); + + /* + * Configure Tx and Rx watermarks configuration registers + * TX watermark value is set to 0 - interrupt is generated when + * FIFO level is less than or equal to 0 + */ + writel(IPQ_UART_DM_TFW_VALUE, + IPQ_UART_DM_TFWR(uart_dm_base)); + + /* RX watermark value */ + writel(IPQ_UART_DM_RFW_VALUE, + IPQ_UART_DM_RFWR(uart_dm_base)); + + /* Configure Interrupt Programming Register */ + /* Set initial Stale timeout value */ + writel(IPQ_UART_DM_STALE_TIMEOUT_LSB, + IPQ_UART_DM_IPR(uart_dm_base)); + + /* Configure IRDA if required */ + /* Disabling IRDA mode */ + writel(0x0, IPQ_UART_DM_IRDA(uart_dm_base)); + + /* Configure hunt character value in HCR register */ + /* Keep it in reset state */ + writel(0x0, IPQ_UART_DM_HCR(uart_dm_base)); + + /* + * Configure Rx FIFO base address + * Both TX/RX shares same SRAM and default is half-n-half. + * Sticking with default value now. + * As such RAM size is (2^RAM_ADDR_WIDTH, 32-bit entries). + * We have found RAM_ADDR_WIDTH = 0x7f + */ + + /* Issue soft reset command */ + msm_boot_uart_dm_reset(uart_dm_base); + + /* Enable/Disable Rx/Tx DM interfaces */ + /* Data Mover not currently utilized. */ + writel(0, IPQ_UART_DM_DMEN(uart_dm_base)); + + /* Enable transmitter */ + writel(IPQ_UART_DM_CR_TX_ENABLE, + IPQ_UART_DM_CR(uart_dm_base)); + + /* Initialize Receive Path */ + msm_boot_uart_dm_init_rx_transfer(uart_dm_base); + + return 0; +} + +/** + * serial_havechar - checks if data available for reading + * + * Returns 1 if data available, 0 otherwise + */ +int serial_havechar(void) +{ + /* Return if data is already read */ + if (uart_ready_data_count) + return 1; + + /* Read data from the FIFO */ + if (msm_boot_uart_dm_read() != IPQ_UART_DM_E_SUCCESS) + return 0; + + return 1; +} + +/** + * ipq806x_serial_getc - reads a character + * + * Returns the character read from serial port. + */ +int serial_getchar(void) +{ + uint8_t byte; + + while (!serial_havechar()) { + /* wait for incoming data */ + } + + byte = (uint8_t)(uart_rx_fifo_word & 0xff); + uart_rx_fifo_word = uart_rx_fifo_word >> 8; + uart_ready_data_count--; + + return byte; +} + +/* For simplicity sake let's rely on coreboot initalizing the UART. */ +void serial_console_init(void) +{ + struct cb_serial *sc_ptr = lib_sysinfo.serial; + + if (!sc_ptr) + return; + + base_uart_addr = (void *) sc_ptr->baseaddr; + + consin.havekey = serial_havechar; + consin.getchar = serial_getchar; + + consout.putchar = serial_putchar; + + console_add_output_driver(&consout); + console_add_input_driver(&consin); +} |