device/dram: add DDR4 RCD I2C access functions

Registering Clock Driver (RCD) is responsible for driving address and
control nets on RDIMM and LRDIMM applications. Its operation is
configurable by a set of Register Control Words (RCWs). There are two
ways of accessing RCWs: in-band on the memory channel as MRS commands
("MR7") or through I2C.

Access through I2C is generic, while MRS commands are passed to memory
controller registers in an implementation-specific way.

See JESD82-31 JEDEC standard for full details.

Change-Id: Ie4e6cfaeae16aba1853b33d527eddebadfbd3887
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>

2 files changed, 219 insertions, 1 deletions

diff --git a/src/device/dram/Makefile.inc b/src/device/dram/Makefile.inc
index eb2e629991b6..64f1dba8010c 100644
--- a/src/device/dram/Makefile.inc
+++ b/src/device/dram/Makefile.inc
@@ -9,7 +9,7 @@ ramstage-$(CONFIG_USE_DDR5) += ddr5.c
 romstage-$(CONFIG_USE_LPDDR4) += lpddr4.c
 ramstage-$(CONFIG_USE_LPDDR4) += lpddr4.c
 
-romstage-$(CONFIG_USE_DDR4) += ddr4.c
+romstage-$(CONFIG_USE_DDR4) += ddr4.c rcd.c
 ramstage-$(CONFIG_USE_DDR4) += ddr4.c
 
 romstage-$(CONFIG_USE_DDR3) += ddr3.c
diff --git a/src/device/dram/rcd.c b/src/device/dram/rcd.c
new file mode 100644
index 000000000000..dc183352bd13
--- /dev/null
+++ b/src/device/dram/rcd.c
@@ -0,0 +1,218 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <device/dram/rcd.h>
+#include <endian.h>
+#include <lib.h>
+
+/**
+ * Registering Clock Driver (RCD) is responsible for driving address and control
+ * nets on RDIMM and LRDIMM applications. Its operation is configurable by a set
+ * of Register Control Words (RCWs). There are two ways of accessing RCWs:
+ * in-band on the memory channel as an MRS commands ("MR7") or through I2C.
+ *
+ * From JESD82-31: "For changes to the control word setting, (...) the
+ * controller needs to wait tMRD after _the last control word access_, before
+ * further access _to the DRAM_ can take place". MRS is passed to rank 0 of the
+ * DRAM, but MR7 is reserved so it is ignored by DRAM. tMRD (8nCK) applies here,
+ * unless longer delay is needed for RCWs which control the clock timing (see
+ * JESD82-31 for list of such). This makes sense from DRAMs point of view,
+ * however we are talking to the Registering Clock Driver (RCD), not DRAM. From
+ * parts marked in the sentence above one may assume that only one delay at the
+ * end is necessary and RCWs can be written back to back; however, in the same
+ * document in table 141 tMRD is defined as "Number of clock cycles between two
+ * control word accesses, MRS accesses, or any DRAM commands".
+ *
+ * I2C access to RCWs is required to support byte (8b), word (16b) and double
+ * word (32b) write size. Bigger blocks are not required. Reads must always be
+ * 32b, 32b-aligned blocks, even when reading just one RCW. RCD ignores the two
+ * lowest bits so unaligned accesses would return shifted values. RCWs are
+ * tightly packed in I2C space, so it is not possible to write just one 4b RCW
+ * without writing its neighbor. This is especially important for F0RC06,
+ * Command Space Control Word, as it is able to reset the state of RCD. For this
+ * reason, the mentioned register has NOP command (all 1's). JESD82-31 does not
+ * specify timeouts required for such multi-RCWs writes, or any other writes.
+ * These are not MRS accesses, so it would be strange to apply those timeouts.
+ * Perhaps only the registers that actually change the clock settings require
+ * time to stabilize. On the other hand, I2C is relatively slow, so it is
+ * possible that the write itself is long enough.
+ *
+ * RCD I2C address is 0xBx (or 0x58 + DIMM number, depending on convention), it
+ * is located on the same bus as SPD. It uses a bus command encoding, see
+ * section 3.3 in JESD82-31 for description of reading and writing register
+ * values.
+ *
+ * This file includes only functions for access through I2C - it is generic,
+ * while MRS commands are passed to memory controller registers in an
+ * implementation specific way.
+ */
+
+#define RCD_CMD_BEGIN		0x80
+#define RCD_CMD_END		0x40
+#define RCD_CMD_PEC		0x10
+#define RCD_CMD_RD_DWORD	0x00
+#define RCD_CMD_WR_BYTE		0x04
+#define RCD_CMD_WR_WORD		0x08
+#define RCD_CMD_WR_DWORD	0x0C
+#define RCD_CMD_BUS_BYTE	0x00
+#define RCD_CMD_BUS_BLOCK	0x02
+
+/* Shorthand for block transfers */
+#define RCD_CMD_BLOCK	(RCD_CMD_BEGIN | RCD_CMD_END | RCD_CMD_BUS_BLOCK)
+
+/* Excluding size of data */
+#define RCD_CMD_BYTES	4
+
+/* Use byte fields to get rid of endianness issues. */
+struct rcd_i2c_cmd {
+	uint8_t cmd;
+	uint8_t bytes;  /* From next byte up to PEC (excluding) */
+	uint8_t reserved;
+	uint8_t devfun;
+	uint8_t reg_h;
+	uint8_t reg_l;
+	union {  /* Not used for reads, can use 1, 2 or 4 for writes */
+		uint8_t bdata;
+		uint32_t ddata;
+	};
+	/* Optional PEC */
+} __packed;
+
+#define RCD_STS_SUCCESS			0x01
+#define RCD_STS_INTERNAL_TARGET_ABORT	0x10
+
+/* Always 4 bytes data + status (for block commands) */
+#define RCD_RSP_BYTES	5
+
+struct rcd_i2c_rsp {
+	uint8_t bytes;  /* From next byte up to PEC (excluding) */
+	uint8_t status;
+	union {
+		uint8_t bdata;
+		uint32_t ddata;
+	};
+	/* Optional PEC */
+} __packed;
+
+/* Reads a register storing its value in the host's byte order. Returns non-zero on success. */
+static int rcd_readd(unsigned int bus, uint8_t slave, uint8_t reg, uint32_t *data)
+{
+	struct i2c_msg seg[2];
+	struct rcd_i2c_cmd cmd = {
+		.cmd = RCD_CMD_BLOCK | RCD_CMD_RD_DWORD,
+		.bytes = RCD_CMD_BYTES,
+		.reg_l = reg
+	};
+	struct rcd_i2c_rsp rsp = { 0xaa, 0x55 };
+
+	seg[0].flags = 0;
+	seg[0].slave = slave;
+	seg[0].buf   = (uint8_t *)&cmd;
+	seg[0].len   = cmd.bytes + 2;  /* + .cmd and .bytes fields */
+
+	i2c_transfer(bus, seg, 1);
+
+	seg[0].len   = 1;	/* Send just the command again */
+	seg[1].flags = I2C_M_RD;
+	seg[1].slave = slave;
+	seg[1].buf   = (uint8_t *)&rsp;
+	seg[1].len   = RCD_RSP_BYTES + 1;  /* + .bytes field */
+
+	i2c_transfer(bus, seg, ARRAY_SIZE(seg));
+
+	/* Data is sent MSB to LSB, i.e. higher registers to lower. */
+	*data = be32toh(rsp.ddata);
+
+	return rsp.status == RCD_STS_SUCCESS;
+}
+
+static int rcd_writed(unsigned int bus, uint8_t slave, uint8_t reg, uint32_t data)
+{
+	struct i2c_msg seg;
+	struct rcd_i2c_cmd cmd = {
+		.cmd = RCD_CMD_BLOCK | RCD_CMD_WR_DWORD,
+		.bytes = RCD_CMD_BYTES + sizeof(data),
+		.reg_l = reg,
+		/* Data is sent MSB to LSB, i.e. higher registers to lower. */
+		.ddata = htobe32(data)
+	};
+
+	seg.flags = 0;
+	seg.slave = slave;
+	seg.buf   = (uint8_t *)&cmd;
+	seg.len   = cmd.bytes + 2;  /* + .cmd and .bytes fields */
+
+	return i2c_transfer(bus, &seg, 1);
+}
+
+static int rcd_writeb(unsigned int bus, uint8_t slave, uint8_t reg, uint8_t data)
+{
+	struct i2c_msg seg;
+	struct rcd_i2c_cmd cmd = {
+		.cmd = RCD_CMD_BLOCK | RCD_CMD_WR_BYTE,
+		.bytes = RCD_CMD_BYTES + sizeof(data),
+		.reg_l = reg,
+		.bdata = data
+	};
+
+	seg.flags = 0;
+	seg.slave = slave;
+	seg.buf   = (uint8_t *)&cmd;
+	seg.len   = cmd.bytes + 2;  /* + .cmd and .bytes fields */
+
+	return i2c_transfer(bus, &seg, 1);
+}
+
+int rcd_write_reg(unsigned int bus, uint8_t slave, enum rcw_idx reg,
+		  uint8_t data)
+{
+	if (reg < F0RC00_01 || reg > F0RCFx) {
+		printk(BIOS_ERR, "Trying to write to illegal RCW %#2.2x\n",
+		       reg);
+		return 0;
+	}
+
+	return rcd_writeb(bus, slave, reg, data);
+}
+
+int rcd_write_32b(unsigned int bus, uint8_t slave, enum rcw_idx reg,
+		  uint32_t data)
+{
+	if (reg < F0RC00_01 || reg > F0RCFx) {
+		printk(BIOS_ERR, "Trying to write to illegal RCW %#2.2x\n",
+		       reg);
+		return 0;
+	}
+
+	if (reg & 3) {
+		/*
+		 * RCD would silently mask out the lowest bits, assume that this
+		 * is not what caller wanted.
+		 */
+		printk(BIOS_ERR, "Unaligned RCW %#2.2x, aborting\n", reg);
+		return 0;
+	}
+
+	return rcd_writed(bus, slave, reg, data);
+}
+
+void dump_rcd(unsigned int bus, u8 addr)
+{
+	/* Can only read in 32b chunks */
+	uint8_t buf[RCW_ALL_ALIGNED];
+	int i;
+
+	for (i = 0; i < RCW_ALL_ALIGNED; i += sizeof(uint32_t)) {
+		uint32_t data;
+		if (!rcd_readd(bus, addr, i, &data)) {
+			printk(BIOS_ERR, "Failed to read RCD (%d-%02x) at offset %#2.2x\n",
+			       bus, addr, i);
+			return;
+		}
+		/* We want to dump memory the way it's stored, so make sure it's in LE. */
+		*(uint32_t *)&buf[i] = htole32(data);
+	}
+
+	printk(BIOS_DEBUG, "RCD dump for I2C address %#2.2x:\n", addr);
+	hexdump(buf, sizeof(buf));
+}