AGESA,binaryPI boards: Move IRQ table programming

IRQ programming should be done outside (obsolete) MP table
generation.

Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 51 insertions, 28 deletions

diff --git a/src/mainboard/lippert/frontrunner-af/mptable.c b/src/mainboard/lippert/frontrunner-af/mptable.c
index 5196caf33f83..d948cd0594ac 100644
--- a/src/mainboard/lippert/frontrunner-af/mptable.c
+++ b/src/mainboard/lippert/frontrunner-af/mptable.c
@@ -1,21 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
 #include <arch/smp/mpspec.h>
-#include <arch/io.h>
 #include <arch/ioapic.h>
 #include <string.h>
 #include <stdint.h>
 #include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
-
-u8 intr_data[] = {
-	[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
-	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
-	[0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x10,0x11,0x12,0x13
-};
+#include <southbridge/amd/common/amd_pci_util.h>
 
 static void *smp_write_config_table(void *v)
 {
@@ -42,13 +32,6 @@ static void *smp_write_config_table(void *v)
 	/* I/O APICs:	 APIC ID Version State	 Address */
 	smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
 
-	u8 byte;
-
-	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
-	outb(byte | 0x80, 0xC00);
-	outb(intr_data[byte], 0xC01);
-	}
-
 	/* I/O Ints:	Type	Polarity	Trigger	 Bus ID	 IRQ	APIC ID PIN# */
 #define IO_LOCAL_INT(type, intr, apicid, pin) \
 	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
@@ -62,23 +45,23 @@ static void *smp_write_config_table(void *v)
 		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
 
 	/* APU Internal Graphic Device*/
-	PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
-	PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+	PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[0x02]);
+	PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[0x03]);
 
 	//PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
 	PCI_INT(0x0, 0x14, 0x0, 0x10);
 	/* Southbridge HD Audio: */
 	PCI_INT(0x0, 0x14, 0x2, 0x12);
 
-	PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
-	PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
-	PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
-	PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
-	PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
-	PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+	PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[0x30]); /* USB */
+	PCI_INT(0x0, 0x12, 0x1, intr_data_ptr[0x31]);
+	PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[0x32]);
+	PCI_INT(0x0, 0x13, 0x1, intr_data_ptr[0x33]);
+	PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[0x34]);
+	PCI_INT(0x0, 0x16, 0x1, intr_data_ptr[0x35]);
 
 	/* sata */
-	PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+	PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[0x41]);
 
 	/* on board NIC & Slot PCIE.	*/
 
diff --git a/src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c
index f87d21d2b1dd..c5704c9193fd 100644
--- a/src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c
+++ b/src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c
@@ -4,6 +4,7 @@
 #include <amdblocks/acpimmio.h>
 #include <console/console.h>
 #include <device/device.h>
+#include <southbridge/amd/common/amd_pci_util.h>
 #include <arch/io.h>
 #include <device/mmio.h>
 #include <device/pci_ops.h>
@@ -13,6 +14,16 @@
 #include <southbridge/amd/cimx/sb800/gpio_oem.h>
 #include "sema.h"
 
+static const u8 mainboard_intr_data[] = {
+	[0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,  /* INTA# - INTH# */
+	[0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F,  /* Misc-nil, 0, 1, 2,  INT from Serial irq */
+	[0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x12, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x10, 0x11, 0x12, 0x13
+};
+
 /* Init SIO GPIOs. */
 #define SIO_RUNTIME_BASE 0x0E00
 static const u16 sio_init_table[] = { // hi = offset, lo = value
@@ -44,6 +55,12 @@ static const u16 sio_init_table[] = { // hi = offset, lo = value
 	0x5780, // GP65: USB power 4/5    = open drain output
 };
 
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+	intr_data_ptr = mainboard_intr_data;
+}
+
 static void init(struct device *dev)
 {
 	volatile u8 *spi_base;	/* base addr of Hudson's SPI host controller */
@@ -78,7 +95,6 @@ static void init(struct device *dev)
 	iomux_write8(190, 1);
 	iomux_write8(191, 1);
 	iomux_write8(192, 1);
-
 	/* just in case anyone cares */
 	if (!fch_gpio_state(197))
 		printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
@@ -114,6 +130,9 @@ static void init(struct device *dev)
  **********************************************/
 static void mainboard_enable(struct device *dev)
 {
+	/* Initialize the PIRQ data structures for consumption */
+	pirq_setup();
+
 	dev->ops->init = init;
 
 	/* enable GPP CLK0 */
diff --git a/src/mainboard/lippert/frontrunner-af/variants/toucan-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/variants/toucan-af/mainboard.c
index 3a4db8513d4e..8992594525ce 100644
--- a/src/mainboard/lippert/frontrunner-af/variants/toucan-af/mainboard.c
+++ b/src/mainboard/lippert/frontrunner-af/variants/toucan-af/mainboard.c
@@ -1,8 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
+#include <stdlib.h>
 #include <amdblocks/acpimmio.h>
 #include <console/console.h>
 #include <device/device.h>
+#include <southbridge/amd/common/amd_pci_util.h>
 #include <device/mmio.h>
 #include <device/pci_ops.h>
 #include <device/pci_def.h>
@@ -11,6 +13,16 @@
 #include <southbridge/amd/cimx/sb800/gpio_oem.h>
 #include "mainboard/lippert/frontrunner-af/sema.h"
 
+static const u8 mainboard_intr_data[] = {
+	[0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,  /* INTA# - INTH# */
+	[0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F,  /* Misc-nil, 0, 1, 2,  INT from Serial irq */
+	[0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x12, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x10, 0x11, 0x12, 0x13
+};
+
 static void init(struct device *dev)
 {
 	volatile u8 *spi_base;	/* base addr of Hudson's SPI host controller */
@@ -79,11 +91,20 @@ static void init(struct device *dev)
 
 }
 
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+	intr_data_ptr = mainboard_intr_data;
+}
+
 /**********************************************
  * Enable the dedicated functions of the board.
  **********************************************/
 static void mainboard_enable(struct device *dev)
 {
+	/* Initialize the PIRQ data structures for consumption */
+	pirq_setup();
+
 	dev->ops->init = init;
 
 	/* enable GPP CLK0 thru CLK1 */