summaryrefslogtreecommitdiffstats
path: root/src/soc
diff options
context:
space:
mode:
authorAamir Bohra <aamir.bohra@intel.com>2017-12-04 16:24:21 +0530
committerSubrata Banik <subrata.banik@intel.com>2017-12-07 03:21:04 +0000
commit230ada6d3ca96d749ad265fc164197e2e81b1e14 (patch)
tree646cf03d378f170c997747a6edca21a4ea4fa54b /src/soc
parent75c6f4aeb612b0d1b31e85757d56947632275816 (diff)
downloadcoreboot-230ada6d3ca96d749ad265fc164197e2e81b1e14.tar.gz
coreboot-230ada6d3ca96d749ad265fc164197e2e81b1e14.tar.bz2
coreboot-230ada6d3ca96d749ad265fc164197e2e81b1e14.zip
soc/intel/skylake: Clean up UART code
Clean up and move UART related code under a single uart.c file. Change-Id: I7ed03fc5fe79e38350d7edc70ad55d54db780fed Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/skylake/Makefile.inc15
-rw-r--r--src/soc/intel/skylake/bootblock/uart.c57
-rw-r--r--src/soc/intel/skylake/uart.c50
-rw-r--r--src/soc/intel/skylake/uart_debug.c26
4 files changed, 54 insertions, 94 deletions
diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc
index ea84afda5daa..4aa76edd7407 100644
--- a/src/soc/intel/skylake/Makefile.inc
+++ b/src/soc/intel/skylake/Makefile.inc
@@ -14,21 +14,20 @@ bootblock-y += bootblock/cpu.c
bootblock-y += i2c.c
bootblock-y += bootblock/pch.c
bootblock-y += bootblock/report_platform.c
-bootblock-$(CONFIG_UART_DEBUG) += bootblock/uart.c
-bootblock-$(CONFIG_UART_DEBUG) += uart_debug.c
bootblock-y += gpio.c
bootblock-y += gspi.c
bootblock-y += pch.c
bootblock-y += pmutil.c
bootblock-y += spi.c
bootblock-y += lpc.c
+bootblock-$(CONFIG_UART_DEBUG) += uart.c
verstage-y += gspi.c
verstage-y += pch.c
-verstage-$(CONFIG_UART_DEBUG) += uart_debug.c
verstage-y += pmutil.c
verstage-y += i2c.c
verstage-y += spi.c
+verstage-$(CONFIG_UART_DEBUG) += uart.c
romstage-y += gpio.c
romstage-y += gspi.c
@@ -41,7 +40,7 @@ romstage-y += pmc.c
romstage-y += pmutil.c
romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
romstage-y += spi.c
-romstage-$(CONFIG_UART_DEBUG) += uart_debug.c
+romstage-$(CONFIG_UART_DEBUG) += uart.c
ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
ramstage-$(CONFIG_PLATFORM_USES_FSP1_1) += chip.c
@@ -69,8 +68,7 @@ ramstage-y += smmrelocate.c
ramstage-y += spi.c
ramstage-y += systemagent.c
ramstage-y += thermal.c
-ramstage-y += uart.c
-ramstage-$(CONFIG_UART_DEBUG) += uart_debug.c
+ramstage-$(CONFIG_UART_DEBUG) += uart.c
ramstage-y += vr_config.c
smm-y += elog.c
@@ -78,13 +76,12 @@ smm-y += gpio.c
smm-y += pch.c
smm-y += pmutil.c
smm-y += smihandler.c
-smm-$(CONFIG_UART_DEBUG) += uart_debug.c
-smm-y += uart.c
+smm-$(CONFIG_UART_DEBUG) += uart.c
postcar-y += memmap.c
-postcar-$(CONFIG_UART_DEBUG) += uart_debug.c
postcar-y += gspi.c
postcar-y += spi.c
+postcar-$(CONFIG_UART_DEBUG) += uart.c
# cpu_microcode_bins += ???
diff --git a/src/soc/intel/skylake/bootblock/uart.c b/src/soc/intel/skylake/bootblock/uart.c
deleted file mode 100644
index f6e7e13b8ef9..000000000000
--- a/src/soc/intel/skylake/bootblock/uart.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2015 Google Inc.
- * Copyright (C) 2015 Intel Corporation
- * Copyright (C) 2016 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/uart.h>
-#include <device/pci_def.h>
-#include <gpio.h>
-#include <intelblocks/lpss.h>
-#include <intelblocks/pcr.h>
-#include <intelblocks/uart.h>
-#include <soc/bootblock.h>
-#include <soc/pci_devs.h>
-#include <soc/pcr_ids.h>
-
-/* Serial IO UART controller legacy mode */
-#define PCR_SERIAL_IO_GPPRVRW7 0x618
-#define PCR_SIO_PCH_LEGACY_UART(idx) (1 << (idx))
-
-/* UART2 pad configuration. Support RXD and TXD for now. */
-static const struct pad_config uart2_pads[] = {
-/* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
-/* UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
-};
-
-void pch_uart_init(void)
-{
- uintptr_t base = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
-
- uart_common_init(PCH_DEV_UART2, base);
-
- /* Put UART2 in byte access mode for 16550 compatibility */
- if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) {
- pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
- PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
-
- /*
- * Dummy read after setting any of GPPRVRW7.
- * Required for UART 16550 8-bit Legacy mode to become active
- */
- lpss_clk_read(base);
- }
-
- gpio_configure_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
-}
diff --git a/src/soc/intel/skylake/uart.c b/src/soc/intel/skylake/uart.c
index 31389297b305..6f3c21e58664 100644
--- a/src/soc/intel/skylake/uart.c
+++ b/src/soc/intel/skylake/uart.c
@@ -2,7 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Google Inc.
- * Copyright (C) 2015 Intel Corporation
+ * Copyright (C) 2015-2017 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,11 +15,57 @@
*/
#include <cbmem.h>
+#include <console/uart.h>
#include <device/pci.h>
+#include <device/pci_def.h>
+#include <gpio.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/pcr.h>
#include <intelblocks/uart.h>
-#include <soc/iomap.h>
+#include <soc/bootblock.h>
#include <soc/nvs.h>
#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+
+/* Serial IO UART controller legacy mode */
+#define PCR_SERIAL_IO_GPPRVRW7 0x618
+#define PCR_SIO_PCH_LEGACY_UART(idx) (1 << (idx))
+
+/* UART2 pad configuration. Support RXD and TXD for now. */
+static const struct pad_config uart2_pads[] = {
+/* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
+/* UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
+};
+
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM)
+uintptr_t uart_platform_base(int idx)
+{
+ /* Same base address for all debug port usage. In reality UART2
+ * is currently only supported. */
+ return UART_BASE_0_ADDR(idx);
+}
+#endif
+
+void pch_uart_init(void)
+{
+ uintptr_t base = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
+
+ uart_common_init(PCH_DEV_UART2, base);
+
+ /* Put UART2 in byte access mode for 16550 compatibility */
+ if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) {
+ pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
+ PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
+
+ /*
+ * Dummy read after setting any of GPPRVRW7.
+ * Required for UART 16550 8-bit Legacy mode to become active
+ */
+ lpss_clk_read(base);
+ }
+
+ gpio_configure_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
#if !ENV_SMM
void pch_uart_read_resources(struct device *dev)
diff --git a/src/soc/intel/skylake/uart_debug.c b/src/soc/intel/skylake/uart_debug.c
deleted file mode 100644
index eedf6564be05..000000000000
--- a/src/soc/intel/skylake/uart_debug.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2015 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stddef.h>
-#include <console/uart.h>
-#include <soc/iomap.h>
-#include <soc/serialio.h>
-
-uintptr_t uart_platform_base(int idx)
-{
- /* Same base address for all debug port usage. In reality UART2
- * is currently only supported. */
- return UART_BASE_0_ADDR(idx);
-}