diff options
Diffstat (limited to 'src/cpu/amd/model_10xxx/fidvid.c')
-rw-r--r-- | src/cpu/amd/model_10xxx/fidvid.c | 227 |
1 files changed, 107 insertions, 120 deletions
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index fb8e7da76fbb..cba7c2a90810 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -17,41 +17,39 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if FAM10_SET_FIDVID == 1 +#if SET_FIDVID == 1 #include "../../../northbridge/amd/amdht/AsPsDefs.h" -#define FAM10_SET_FIDVID_DEBUG 1 +#define SET_FIDVID_DEBUG 1 // if we are tight of CAR stack, disable it -#define FAM10_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1 +#define SET_FIDVID_STORE_AP_APICID_AT_FIRST 1 static inline void print_debug_fv(const char *str, u32 val) { -#if FAM10_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%x\n", str, val); +#if SET_FIDVID_DEBUG == 1 + printk(BIOS_DEBUG, "%s%x\n", str, val); #endif } static inline void print_debug_fv_8(const char *str, u8 val) { -#if FAM10_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%02x\n", str, val); +#if SET_FIDVID_DEBUG == 1 + printk(BIOS_DEBUG, "%s%02x\n", str, val); #endif } static inline void print_debug_fv_64(const char *str, u32 val, u32 val2) { -#if FAM10_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2); +#if SET_FIDVID_DEBUG == 1 + printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2); #endif } - struct fidvid_st { u32 common_fid; }; - static void enable_fid_change(u8 fid) { u32 dword; @@ -61,24 +59,24 @@ static void enable_fid_change(u8 fid) nodes = get_nodes(); - for(i = 0; i < nodes; i++) { - dev = NODE_PCI(i,3); + for (i = 0; i < nodes; i++) { + dev = NODE_PCI(i, 3); dword = pci_read_config32(dev, 0xd4); dword &= ~0x1F; dword |= (u32) fid & 0x1F; dword |= 1 << 5; // enable pci_write_config32(dev, 0xd4, dword); - printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x \n", i, dword); + printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x \n", i, + dword); } } - static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) { u8 pviModeFlag; u8 highVoltageVid, lowVoltageVid, bValue; u16 minimumSlamTime; - u16 vSlamTimes[7]={1000,2000,3000,4000,6000,10000,20000}; /* Reg settings scaled by 100 */ + u16 vSlamTimes[7] = { 1000, 2000, 3000, 4000, 6000, 10000, 20000 }; /* Reg settings scaled by 100 */ u32 dtemp; msr_t msr; @@ -94,12 +92,10 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) * decimals. */ - - /* Determine if this is a PVI or SVI system */ dtemp = pci_read_config32(dev, 0xA0); - if( dtemp & PVI_MODE ) + if (dtemp & PVI_MODE) pviModeFlag = 1; else pviModeFlag = 0; @@ -113,7 +109,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) */ if (pviModeFlag) { bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F); - if( highVoltageVid > bValue ) + if (highVoltageVid > bValue) highVoltageVid = bValue; } @@ -130,7 +126,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) */ if (pviModeFlag) { bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F); - if( lowVoltageVid > bValue ) + if (lowVoltageVid > bValue) lowVoltageVid = bValue; } @@ -139,13 +135,13 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) bValue = (u8) (dtemp & BIT_MASK_7); /* Use the VID with the lowest voltage (higher VID) */ - if( lowVoltageVid < bValue ) + if (lowVoltageVid < bValue) lowVoltageVid = bValue; /* If Vids are 7Dh - 7Fh, force 7Ch to keep calculations linear */ if (lowVoltageVid > 0x7C) { lowVoltageVid = 0x7C; - if(highVoltageVid > 0x7C) + if (highVoltageVid > 0x7C) highVoltageVid = 0x7C; } @@ -161,8 +157,8 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) * Note that if we don't find a value, we * will fall through to a value of 7 */ - for(bValue=0; bValue < 7; bValue++) { - if(minimumSlamTime <= vSlamTimes[bValue]) + for (bValue = 0; bValue < 7; bValue++) { + if (minimumSlamTime <= vSlamTimes[bValue]) break; } @@ -173,7 +169,6 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) pci_write_config32(dev, 0xd8, dtemp); } - static void prep_fid_change(void) { u32 dword, dtemp; @@ -185,9 +180,9 @@ static void prep_fid_change(void) nodes = get_nodes(); - for(i = 0; i < nodes; i++) { + for (i = 0; i < nodes; i++) { printk(BIOS_DEBUG, "Prep FID/VID Node:%02x \n", i); - dev = NODE_PCI(i,3); + dev = NODE_PCI(i, 3); dword = pci_read_config32(dev, 0xd8); dword &= VSRAMP_MASK; @@ -214,20 +209,18 @@ static void prep_fid_change(void) */ dword = pci_read_config32(dev, 0xd4); dword &= CPTC0_MASK; - dword |= NB_CLKDID_ALL | NB_CLKDID | PW_STP_UP50 | PW_STP_DN50 | - LNK_PLL_LOCK; /* per BKDG */ + dword |= NB_CLKDID_ALL | NB_CLKDID | PW_STP_UP50 | PW_STP_DN50 | LNK_PLL_LOCK; /* per BKDG */ pci_write_config32(dev, 0xd4, dword); } else { dword = pci_read_config32(dev, 0xd4); dword &= CPTC0_MASK; /* get number of cores for PowerStepUp & PowerStepDown in server - 1 core - 400nS - 0000b - 2 cores - 200nS - 0010b - 3 cores - 133nS -> 100nS - 0011b - 4 cores - 100nS - 0011b - */ - switch(get_core_num_in_bsp(i)) - { + 1 core - 400nS - 0000b + 2 cores - 200nS - 0010b + 3 cores - 133nS -> 100nS - 0011b + 4 cores - 100nS - 0011b + */ + switch (get_core_num_in_bsp(i)) { case 0: dword |= PW_STP_UP400 | PW_STP_DN400; break; @@ -248,12 +241,12 @@ static void prep_fid_change(void) /* check PVI/SVI */ dword = pci_read_config32(dev, 0xA0); - if(dword & PVI_MODE) { /* PVI */ + if (dword & PVI_MODE) { /* PVI */ /* set slamVidMode to 0 for PVI */ dword &= VID_SLAM_OFF | PLLLOCK_OFF; dword |= PLLLOCK_DFT_L; pci_write_config32(dev, 0xA0, dword); - } else { /* SVI */ + } else { /* SVI */ /* set slamVidMode to 1 for SVI */ dword &= PLLLOCK_OFF; dword |= PLLLOCK_DFT_L | VID_SLAM_ON; @@ -264,7 +257,7 @@ static void prep_fid_change(void) /* Program F3xD8[PwrPlanes] according F3xA0[DulaVdd] */ dword = pci_read_config32(dev, 0xD8); - if( dtemp & DUAL_VDD_BIT) + if (dtemp & DUAL_VDD_BIT) dword |= PWR_PLN_ON; else dword &= PWR_PLN_OFF; @@ -275,7 +268,7 @@ static void prep_fid_change(void) * function setFidVidRegs() */ dword = pci_read_config32(dev, 0xDc); - dword |= 0x5 << 12; /* NbsynPtrAdj set to 0x5 per BKDG (needs reset) */ + dword |= 0x5 << 12; /* NbsynPtrAdj set to 0x5 per BKDG (needs reset) */ pci_write_config32(dev, 0xdc, dword); /* Rev B settings - FIXME: support other revs. */ @@ -313,20 +306,18 @@ static void UpdateSinglePlaneNbVid(void) nbVid = (msr.lo & PS_CPU_VID_M_ON) >> PS_CPU_VID_SHFT; cpuVid = (msr.lo & PS_NB_VID_M_ON) >> PS_NB_VID_SHFT; - if( nbVid != cpuVid ) { - if(nbVid > cpuVid) + if (nbVid != cpuVid) { + if (nbVid > cpuVid) nbVid = cpuVid; msr.lo = msr.lo & PS_BOTH_VID_OFF; - msr.lo = msr.lo | (u32)((nbVid) << PS_NB_VID_SHFT); - msr.lo = msr.lo | (u32)((nbVid) << PS_CPU_VID_SHFT); + msr.lo = msr.lo | (u32) ((nbVid) << PS_NB_VID_SHFT); + msr.lo = msr.lo | (u32) ((nbVid) << PS_CPU_VID_SHFT); wrmsr(PS_REG_BASE + i, msr); } } } - - static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid) { msr_t msr; @@ -343,7 +334,7 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid) */ msr = rdmsr(0xc0010071); - startup_pstate = (msr.hi >> (32-32)) & 0x07; + startup_pstate = (msr.hi >> (32 - 32)) & 0x07; /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for this node in P0. * Then transition to P1 for corex and P0 for core0. @@ -379,8 +370,7 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid) } } - -static void coreDelay (void) +static void coreDelay(void) { u32 saved; u32 hi, lo, msr; @@ -390,23 +380,22 @@ static void coreDelay (void) This seems like a hack to me... It would be nice to have a central delay function. */ - cycles = 8000 << 3; /* x8 (number of 1.25ns ticks) */ + cycles = 8000 << 3; /* x8 (number of 1.25ns ticks) */ - msr = 0x10; /* TSC */ + msr = 0x10; /* TSC */ _RDMSR(msr, &lo, &hi); saved = lo; do { _RDMSR(msr, &lo, &hi); - } while (lo - saved < cycles ); + } while (lo - saved < cycles); } - static void transitionVid(u32 targetVid, u8 dev, u8 isNb) { u32 currentVid, dtemp; msr_t msr; u8 vsTimecode; - u16 timeTable[8]={10, 20, 30, 40, 60, 100, 200, 500}; + u16 timeTable[8] = { 10, 20, 30, 40, 60, 100, 200, 500 }; int vsTime; /* This function steps or slam the Nb VID to the target VID. @@ -416,7 +405,7 @@ static void transitionVid(u32 targetVid, u8 dev, u8 isNb) /* get the current VID */ msr = rdmsr(0xC0010071); - if(isNb) + if (isNb) currentVid = (msr.lo >> NB_VID_POS) & BIT_MASK_7; else currentVid = (msr.lo >> CPU_VID_POS) & BIT_MASK_7; @@ -426,11 +415,11 @@ static void transitionVid(u32 targetVid, u8 dev, u8 isNb) /* check PVI/SPI */ dtemp = pci_read_config32(dev, 0xA0); - if (dtemp & PVI_MODE) { /* PVI, step VID */ + if (dtemp & PVI_MODE) { /* PVI, step VID */ if (currentVid < targetVid) { while (currentVid < targetVid) { currentVid++; - if(isNb) + if (isNb) msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS); else msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS); @@ -438,17 +427,17 @@ static void transitionVid(u32 targetVid, u8 dev, u8 isNb) /* read F3xD8[VSRampTime] */ dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8)((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int) timeTable[vsTimecode]; + vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); + vsTime = (int)timeTable[vsTimecode]; do { coreDelay(); - vsTime -=40; - } while(vsTime > 0); + vsTime -= 40; + } while (vsTime > 0); } } else if (currentVid > targetVid) { while (currentVid > targetVid) { currentVid--; - if(isNb) + if (isNb) msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS); else msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS); @@ -456,16 +445,16 @@ static void transitionVid(u32 targetVid, u8 dev, u8 isNb) /* read F3xD8[VSRampTime] */ dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8)((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int) timeTable[vsTimecode]; + vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); + vsTime = (int)timeTable[vsTimecode]; do { coreDelay(); - vsTime -=40; - } while(vsTime > 0); + vsTime -= 40; + } while (vsTime > 0); } } } else { /* SVI, slam VID */ - if(isNb) + if (isNb) msr.lo = (msr.lo & NB_VID_MASK_OFF) | (targetVid << NB_VID_POS); else msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (targetVid << CPU_VID_POS); @@ -473,12 +462,12 @@ static void transitionVid(u32 targetVid, u8 dev, u8 isNb) /* read F3xD8[VSRampTime] */ dtemp = pci_read_config32(dev, 0xD8); - vsTimecode = (u8)((dtemp >> VS_RAMP_T) & 0x7); - vsTime = (int) timeTable[vsTimecode]; + vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7); + vsTime = (int)timeTable[vsTimecode]; do { coreDelay(); - vsTime -=40; - } while(vsTime > 0); + vsTime -= 40; + } while (vsTime > 0); } } @@ -505,13 +494,13 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) nodes = get_nodes(); nb_cof_vid_update = 0; for (i = 0; i < nodes; i++) { - if (pci_read_config32(NODE_PCI(i,3), 0x1FC) & 1) { + if (pci_read_config32(NODE_PCI(i, 3), 0x1FC) & 1) { nb_cof_vid_update = 1; break; } } - dev = NODE_PCI(nodeid,3); + dev = NODE_PCI(nodeid, 3); pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; reg1fc = pci_read_config32(dev, 0x1FC); @@ -537,7 +526,7 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) } send = (nb_cof_vid_update << 16) | (fid_max << 8); - send |= (apicid << 24); // ap apicid + send |= (apicid << 24); // ap apicid // Send signal to BSP about this AP max fid // This also indicates this AP is ready for warm reset (if required). @@ -553,51 +542,51 @@ static u32 calc_common_fid(u32 fid_packed, u32 fid_packed_new) fidmax_new = (fid_packed_new >> 8) & 0xFF; - if(fidmax > fidmax_new) { + if (fidmax > fidmax_new) { fidmax = fidmax_new; } fid_packed &= 0xFF << 16; fid_packed |= (fidmax << 8); - fid_packed |= fid_packed_new & (0xFF << 16); // set nb_cof_vid_update + fid_packed |= fid_packed_new & (0xFF << 16); // set nb_cof_vid_update return fid_packed; } - -static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp ) +static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp) { - u32 readback = 0; - u32 timeout = 1; + u32 readback = 0; + u32 timeout = 1; - struct fidvid_st *fvp = gp; - int loop; + struct fidvid_st *fvp = gp; + int loop; - print_debug_fv("Wait for AP stage 1: ap_apicid = ", ap_apicid); + print_debug_fv("Wait for AP stage 1: ap_apicid = ", ap_apicid); - loop = 100000; - while(--loop > 0) { - if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0) continue; - if((readback & 0x3f) == 1) { - timeout = 0; - break; //target ap is in stage 1 - } + loop = 100000; + while (--loop > 0) { + if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0) + continue; + if ((readback & 0x3f) == 1) { + timeout = 0; + break; /* target ap is in stage 1 */ } + } - if(timeout) { - print_initcpu8("fidvid_bsp_stage1: time out while reading from ap ", ap_apicid); - return; - } + if (timeout) { + printk(BIOS_DEBUG, "%s: timed out reading from ap %02x\n", + __func__, ap_apicid); + return; + } - print_debug_fv("\treadback = ", readback); + print_debug_fv("\treadback = ", readback); - fvp->common_fid = calc_common_fid(fvp->common_fid, readback); + fvp->common_fid = calc_common_fid(fvp->common_fid, readback); - print_debug_fv("\tcommon_fid(packed) = ", fvp->common_fid); + print_debug_fv("\tcommon_fid(packed) = ", fvp->common_fid); } - static void updateSviPsNbVidAfterWR(u32 newNbVid) { msr_t msr; @@ -607,7 +596,7 @@ static void updateSviPsNbVidAfterWR(u32 newNbVid) * for SVI mode. */ - for( i = 0; i < 5; i++) { + for (i = 0; i < 5; i++) { msr = rdmsr(0xC0010064 + i); if ((msr.hi >> 31) & 1) { /* PstateEn? */ msr.lo &= ~(0x7F << 25); @@ -632,13 +621,13 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll) */ /* write newNbVid to P-state Reg's NbVid if its NbDid=0 */ - for( i = 0; i < 5; i++) { + for (i = 0; i < 5; i++) { msr = rdmsr(0xC0010064 + i); /* NbDid (bit 22 of P-state Reg) == 0 or NbVidUpdatedAll = 1 */ if ((((msr.lo >> 22) & 1) == 0) || NbVidUpdatedAll) { msr.lo &= ~(0x7F << 25); msr.lo |= (newNbVid & 0x7F) << 25; - wrmsr (0xC0010064 + i, msr); + wrmsr(0xC0010064 + i, msr); } } @@ -651,13 +640,12 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll) msr.lo = StartupPstate; wrmsr(0xC0010062, msr); - /* Wait for StartupPstate to set.*/ + /* Wait for StartupPstate to set. */ do { msr = rdmsr(0xC0010063); } while (msr.lo != StartupPstate); } - static void set_p0(void) { msr_t msr; @@ -673,8 +661,8 @@ static void set_p0(void) } while (msr.lo != 0); } - -static void finalPstateChange (void) { +static void finalPstateChange(void) +{ /* Enble P0 on all cores for best performance. * Linux can slow them down later if need be. * It is safe since they will be in C1 halt @@ -683,7 +671,6 @@ static void finalPstateChange (void) { set_p0(); } - static void init_fidvid_stage2(u32 apicid, u32 nodeid) { msr_t msr; @@ -703,13 +690,13 @@ static void init_fidvid_stage2(u32 apicid, u32 nodeid) nodes = get_nodes(); nb_cof_vid_update = 0; for (i = 0; i < nodes; i++) { - if (pci_read_config32(NODE_PCI(i,3), 0x1FC) & 1) { + if (pci_read_config32(NODE_PCI(i, 3), 0x1FC) & 1) { nb_cof_vid_update = 1; break; } } - dev = NODE_PCI(nodeid,3); + dev = NODE_PCI(nodeid, 3); pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; reg1fc = pci_read_config32(dev, 0x1FC); nbvid = (reg1fc >> 7) & 0x7F; @@ -724,7 +711,7 @@ static void init_fidvid_stage2(u32 apicid, u32 nodeid) nbvid = ((reg1fc >> 7) & 0x7F) - ((reg1fc >> 17) & 0x1F); updateSviPsNbVidAfterWR(nbvid); } - } else { /* !nb_cof_vid_update */ + } else { /* !nb_cof_vid_update */ if (pvimode) UpdateSinglePlaneNbVid(); } @@ -742,7 +729,7 @@ static void init_fidvid_stage2(u32 apicid, u32 nodeid) } -#if FAM10_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 +#if SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 struct ap_apicid_st { u32 num; // it could use 256 bytes for 64 node quad core system @@ -761,7 +748,7 @@ static void store_ap_apicid(unsigned ap_apicid, void *gp) static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) { -#if FAM10_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 +#if SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 struct ap_apicid_st ap_apicidx; u32 i; #endif @@ -785,7 +772,7 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) /* If any node has nb_cof_vid_update set all nodes need an update. */ nb_cof_vid_update = 0; for (i = 0; i < nodes; i++) { - if (pci_read_config32(NODE_PCI(i,3), 0x1FC) & 1) { + if (pci_read_config32(NODE_PCI(i, 3), 0x1FC) & 1) { nb_cof_vid_update = 1; break; } @@ -810,29 +797,29 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) /* fid setup is handled by the BSP at the end. */ - } else { /* ! nb_cof_vid_update */ + } else { /* ! nb_cof_vid_update */ /* Use max values */ if (pvimode) UpdateSinglePlaneNbVid(); } - fv.common_fid = (nb_cof_vid_update << 16) | (fid_max << 8) ; + fv.common_fid = (nb_cof_vid_update << 16) | (fid_max << 8); print_debug_fv("BSP fid = ", fv.common_fid); -#if FAM10_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 && FAM10_SET_FIDVID_CORE0_ONLY == 0 +#if SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 && SET_FIDVID_CORE0_ONLY == 0 /* For all APs (We know the APIC ID of all APs even when the APIC ID is lifted) remote read from AP LAPIC_MSG_REG about max fid. Then calculate the common max fid that can be used for all APs and BSP */ ap_apicidx.num = 0; - for_each_ap(bsp_apicid, FAM10_SET_FIDVID_CORE_RANGE, store_ap_apicid, &ap_apicidx); + for_each_ap(bsp_apicid, SET_FIDVID_CORE_RANGE, store_ap_apicid, &ap_apicidx); - for(i = 0; i < ap_apicidx.num; i++) { + for (i = 0; i < ap_apicidx.num; i++) { init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv); } #else - for_each_ap(bsp_apicid, FAM10_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv); + for_each_ap(bsp_apicid, SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv); #endif print_debug_fv("common_fid = ", fv.common_fid); @@ -846,6 +833,6 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) return 1; } - return 0; // No FID/VID changes. Don't reset + return 0; // No FID/VID changes. Don't reset } #endif |