diff options
Diffstat (limited to 'src/drivers/net/phy/m88e1512/m88e1512.c')
| -rw-r--r-- | src/drivers/net/phy/m88e1512/m88e1512.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/src/drivers/net/phy/m88e1512/m88e1512.c b/src/drivers/net/phy/m88e1512/m88e1512.c index 07110c630ebe..7e675001ecc1 100644 --- a/src/drivers/net/phy/m88e1512/m88e1512.c +++ b/src/drivers/net/phy/m88e1512/m88e1512.c @@ -21,10 +21,10 @@ static void m88e1512_init(struct device *dev) if (config->downshift_cnt) { if (config->downshift_cnt > DOWNSHIFT_CNT_MAX) { printk(BIOS_INFO, "%s: Downshift counter for %s is too large.\n", - dev_path(dev->bus->dev), dev->chip_ops->name); + dev_path(dev->upstream->dev), dev->chip_ops->name); } else { printk(BIOS_DEBUG, "%s: Enable downshift after %d attempts for %s.\n", - dev_path(dev->bus->dev), config->downshift_cnt, + dev_path(dev->upstream->dev), config->downshift_cnt, dev->chip_ops->name); reg = mdio_read(dev, COPPER_SPEC_CTRL_REG_1); @@ -42,7 +42,7 @@ static void m88e1512_init(struct device *dev) /* Configure LEDs if requested. */ if (config->configure_leds) { printk(BIOS_DEBUG, "%s: Set a customized LED mode for %s.\n", - dev_path(dev->bus->dev), dev->chip_ops->name); + dev_path(dev->upstream->dev), dev->chip_ops->name); /* Select page 3 to access LED function control register. */ switch_page(dev, 3); @@ -57,7 +57,7 @@ static void m88e1512_init(struct device *dev) /* INTn can be routed to LED[2] pin. */ if (config->enable_int) { printk(BIOS_DEBUG, "%s: INTn is routed to LED[2] pin %s.\n", - dev_path(dev->bus->dev), dev->chip_ops->name); + dev_path(dev->upstream->dev), dev->chip_ops->name); /* Select page 3 to access LED function control register. */ switch_page(dev, 3); @@ -70,7 +70,7 @@ static void m88e1512_init(struct device *dev) /* Set RGMII output impedance manually. */ if (config->force_mos) { printk(BIOS_DEBUG, "%s: Set RGMII driver strength manually for %s.\n", - dev_path(dev->bus->dev), dev->chip_ops->name); + dev_path(dev->upstream->dev), dev->chip_ops->name); /* Select page 2 to access RGMII output impedance calibration override register. */ |