diff options
Diffstat (limited to 'src/mainboard/hp/z220_series/devicetree.cb')
| -rw-r--r-- | src/mainboard/hp/z220_series/devicetree.cb | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/src/mainboard/hp/z220_series/devicetree.cb b/src/mainboard/hp/z220_series/devicetree.cb new file mode 100644 index 000000000000..4611bec14089 --- /dev/null +++ b/src/mainboard/hp/z220_series/devicetree.cb @@ -0,0 +1,165 @@ +## SPDX-License-Identifier: GPL-2.0-only + +chip northbridge/intel/sandybridge + register "gfx.use_spread_spectrum_clock" = "0" + register "gpu_dp_b_hotplug" = "0" + register "gpu_dp_c_hotplug" = "0" + register "gpu_dp_d_hotplug" = "0" + + device cpu_cluster 0 on + chip cpu/intel/model_206ax + register "acpi_c1" = "1" + register "acpi_c2" = "3" + register "acpi_c3" = "5" + device lapic 0 on end + device lapic 0xacac off end + end + end + + device domain 0 on + subsystemid 0x103c 0x1791 inherit + + device pci 00.0 on end # Host bridge Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics VGA controller + + chip southbridge/intel/bd82x6x # Intel Series 7 PCH + register "docking_supported" = "0" + register "gen1_dec" = "0x00fc0601" + register "gen2_dec" = "0x00fc0801" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "true" + register "sata_interface_speed_support" = "0x3" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + device pci 14.0 on end # xHCI + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 on end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio Audio controller + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 on end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7 + device pci 1c.7 on end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + chip superio/common + device pnp 2e.ff on # passes SIO base addr to SSDT gen + chip superio/nuvoton/npcd378 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Parallel port + # global + + # serialice: Vendor writes: + irq 0x14 = 0x9c + irq 0x1c = 0xa8 + irq 0x1d = 0x08 + irq 0x22 = 0x3f + irq 0x1a = 0xb0 + # dumped from superiotool: + irq 0x1b = 0x1e + irq 0x27 = 0x08 + irq 0x2a = 0x20 + irq 0x2d = 0x01 + # parallel port + io 0x60 = 0x378 + irq 0x70 = 0x07 + drq 0x74 = 0x01 + end + device pnp 2e.2 off # COM1 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # COM2, IR + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # LED control + io 0x60 = 0x600 + # IOBASE[0h] = bit0 LED red / green + # IOBASE[0h] = bit1-4 LED PWM duty cycle + # IOBASE[1h] = bit6 SWCC + + io 0x62 = 0x610 + # IOBASE [0h] = GPES + # IOBASE [1h] = GPEE + # IOBASE [4h:7h] = 32bit upcounter at 1Mhz + # IOBASE [8h:bh] = GPS + # IOBASE [ch:fh] = GPE + end + device pnp 2e.5 on # Mouse + irq 0x70 = 0xc + end + device pnp 2e.6 on # Keyboard + io 0x60 = 0x0060 + io 0x62 = 0x0064 + irq 0x70 = 0x01 + # serialice: Vendor writes: + drq 0xf0 = 0x40 + end + device pnp 2e.7 on # WDT ? + io 0x60 = 0x620 + end + device pnp 2e.8 on # HWM + io 0x60 = 0x800 + # IOBASE[0h:feh] HWM page + # IOBASE[ffh] bit0-bit3 page selector + + drq 0xf0 = 0x20 + drq 0xf1 = 0x01 + drq 0xf2 = 0x40 + drq 0xf3 = 0x01 + + drq 0xf4 = 0x66 + drq 0xf5 = 0x67 + drq 0xf6 = 0x66 + drq 0xf7 = 0x01 + end + device pnp 2e.f on # GPIO OD ? + drq 0xf1 = 0x97 + drq 0xf2 = 0x01 + drq 0xf5 = 0x08 + drq 0xfe = 0x80 + end + device pnp 2e.15 on # BUS ? + io 0x60 = 0x0680 + io 0x62 = 0x0690 + end + device pnp 2e.1c on # Suspend Control ? + io 0x60 = 0x640 + # writing to IOBASE[5h] + # 0x0: Power off + # 0x9: Power off and bricked until CMOS battery removed + end + device pnp 2e.1e on # GPIO ? + io 0x60 = 0x660 + drq 0xf4 = 0x01 + # skip the following, as it + # looks like remapped registers + #drq 0xf5 = 0x06 + #drq 0xf6 = 0x60 + #drq 0xfe = 0x03 + end + end + end + end + chip drivers/pc80/tpm + device pnp 4e.0 on end # TPM module + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end |