1 files changed, 97 insertions, 0 deletions
diff --git a/src/mainboard/system76/lemp9/romstage.c b/src/mainboard/system76/lemp9/romstage.c
new file mode 100644
index 000000000000..6b9b02eb9235
--- /dev/null
+++ b/src/mainboard/system76/lemp9/romstage.c
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 System76
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <soc/cnl_memcfg_init.h>
+#include <soc/romstage.h>
+
+static const struct cnl_mb_cfg memcfg = {
+	/* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */
+	.spd[0] = {
+		.read_type = READ_SPD_CBFS,
+		.spd_spec = {.spd_index = 0},
+	},
+	.spd[1] = {.read_type = NOT_EXISTING},
+	.spd[2] = {
+		.read_type = READ_SMBUS,
+		.spd_spec = {.spd_smbus_address = 0xa4},
+	},
+	.spd[3] = {.read_type = NOT_EXISTING},
+
+	/*
+	 * For each channel, there are 3 sets of DQ byte mappings,
+	 * where each set has a package 0 and a package 1 value (package 0
+	 * represents the first 64-bit lpddr4 chip combination, and package 1
+	 * represents the second 64-bit lpddr4 chip combination).
+	 * The first three sets are for CLK, CMD, and CTL.
+	 * The fsp package actually expects 6 sets, but the last 3 sets are
+	 * not used in CNL, so we only define the three sets that are used
+	 * and let the meminit_lpddr4() routine take care of clearing the
+	 * unused fields for the caller.
+	 */
+	.dq_map[DDR_CH0] = {
+		{0x0F, 0xF0}, {0x00, 0xF0}, {0x0F, 0xF0},
+		//{0x0F, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
+	},
+	.dq_map[DDR_CH1] = {
+		{0x33, 0xCC}, {0x00, 0xCC}, {0x33, 0xCC},
+		//{0x33, 0x00}, {0xFF, 0x00}, {0xFF, 0x00}
+	},
+
+	/*
+	 * DQS CPU<>DRAM map Ch0 and Ch1.  Each array entry represents a
+	 * mapping of a dq bit on the CPU to the bit it's connected to on
+	 * the memory part.  The array index represents the dqs bit number
+	 * on the memory part, and the values in the array represent which
+	 * pin on the CPU that DRAM pin connects to.
+	 */
+	.dqs_map[DDR_CH0] = {0, 1, 2, 3, 4, 5, 6, 7},
+	.dqs_map[DDR_CH1] = {1, 0, 2, 3, 4, 5, 6, 7},
+
+	/*
+	 * Rcomp resistor values.  These values represent the resistance in
+	 * ohms of the three rcomp resistors attached to the DDR_COMP_0,
+	 * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM.
+	 */
+	.rcomp_resistor = { 121, 81, 100 },
+
+	/*
+	 * Rcomp target values.  These will typically be the following
+	 * values for Cannon Lake : { 80, 40, 40, 40, 30 }
+	 */
+	.rcomp_targets = { 100, 40, 20, 20, 26 },
+
+	/*
+	 * Indicates whether memory is interleaved.
+	 * Set to 1 for an interleaved design,
+	 * set to 0 for non-interleaved design.
+	 */
+	.dq_pins_interleaved = 1,
+
+	/*
+	 * VREF_CA configuration.
+	 * Set to 0 VREF_CA goes to both CH_A and CH_B,
+	 * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B,
+	 * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B.
+	 */
+	.vref_ca_config = 2,
+
+	/* Early Command Training */
+	.ect = 0,
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg);
+}