diff options
Diffstat (limited to 'src/mainboard/tyan/s8226/devicetree.cb')
| -rw-r--r-- | src/mainboard/tyan/s8226/devicetree.cb | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb index 64701a5e992f..9f5e584569e8 100644 --- a/src/mainboard/tyan/s8226/devicetree.cb +++ b/src/mainboard/tyan/s8226/devicetree.cb @@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex end end #superio/winbond/w83627dhg chip drivers/i2c/w83795 + register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8 + register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions + register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13 + register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1 + register "temp_dtse" = "0x03" # Enable DTS1 and DTS2 + register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8 + register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT + register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1) + register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2) + register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3) + register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4) + register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5) + register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6) + register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1 + register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2 + register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3 + register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4 + register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5 + register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6 + register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C + register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C + register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C + register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C + register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C + register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C + register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C + register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C + register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C + register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C + register "fan1_nonstop" = "7" # Set Fan 1 minimum speed + register "fan2_nonstop" = "7" # Set Fan 2 minimum speed + register "fan3_nonstop" = "7" # Set Fan 3 minimum speed + register "fan4_nonstop" = "7" # Set Fan 4 minimum speed + register "fan5_nonstop" = "7" # Set Fan 5 minimum speed + register "fan6_nonstop" = "7" # Set Fan 6 minimum speed + register "fan7_nonstop" = "7" # Set Fan 7 minimum speed + register "fan8_nonstop" = "7" # Set Fan 8 minimum speed + register "default_speed" = "100" # All fans to full speed on power up + register "fan1_duty" = "100" # Fan 1 to full speed + register "fan2_duty" = "100" # Fan 2 to full speed + register "fan3_duty" = "100" # Fan 3 to full speed + register "fan4_duty" = "100" # Fan 4 to full speed + register "fan5_duty" = "100" # Fan 5 to full speed + register "fan6_duty" = "100" # Fan 6 to full speed + register "fan7_duty" = "100" # Fan 7 to full speed + register "fan8_duty" = "100" # Fan 8 to full speed + register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V + register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V + register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V + register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V + register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V + register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V + register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V + register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V + register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V + register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V + register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V + register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V + register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V + register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V + register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V + register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V + register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V + register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V + register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V + register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V + register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V + register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V + register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V + register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V + register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V + register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V + register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V + register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V + register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V + register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V + register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V + register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V + register "smbus_aux" = "0" # Device located on primary SMBUS device pnp 5e on #hwm end end #drivers/i2c/w83795 |