diff options
Diffstat (limited to 'src/southbridge/intel/lynxpoint')
| -rw-r--r-- | src/southbridge/intel/lynxpoint/azalia.c | 8 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/lp_gpio.h | 6 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/lpc.c | 16 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/pch.c | 16 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/pch.h | 6 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/sata.c | 4 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/smihandler.c | 2 |
7 files changed, 29 insertions, 29 deletions
diff --git a/src/southbridge/intel/lynxpoint/azalia.c b/src/southbridge/intel/lynxpoint/azalia.c index cf360ffc607a..68958f08d03a 100644 --- a/src/southbridge/intel/lynxpoint/azalia.c +++ b/src/southbridge/intel/lynxpoint/azalia.c @@ -33,7 +33,7 @@ static void azalia_pch_init(struct device *dev, u8 *base) u16 reg16; u32 reg32; - if (RCBA32(0x2030) & (1UL << 31)) { + if (RCBA32(0x2030) & (1 << 31)) { reg32 = pci_read_config32(dev, 0x120); reg32 &= 0xf8ffff01; reg32 |= (1 << 25); @@ -54,9 +54,9 @@ static void azalia_pch_init(struct device *dev, u8 *base) if (pci_read_config32(dev, 0x120) & ((1 << 24) | (1 << 25) | (1 << 26))) { reg32 = pci_read_config32(dev, 0x120); if (pch_is_lp()) - reg32 &= ~(1UL << 31); + reg32 &= ~(1 << 31); else - reg32 |= (1UL << 31); + reg32 |= (1 << 31); pci_write_config32(dev, 0x120, reg32); } @@ -79,7 +79,7 @@ static void azalia_pch_init(struct device *dev, u8 *base) pci_write_config32(dev, 0xc4, reg32); if (!pch_is_lp()) - pci_and_config32(dev, 0xd0, ~(1UL << 31)); + pci_and_config32(dev, 0xd0, ~(1 << 31)); // Select Azalia mode pci_or_config8(dev, 0x40, 1); // Audio Control diff --git a/src/southbridge/intel/lynxpoint/lp_gpio.h b/src/southbridge/intel/lynxpoint/lp_gpio.h index fbad7d020eba..d0bfab63bf41 100644 --- a/src/southbridge/intel/lynxpoint/lp_gpio.h +++ b/src/southbridge/intel/lynxpoint/lp_gpio.h @@ -40,9 +40,9 @@ #define GPI_LEVEL (1 << 30) #define GPO_LEVEL_SHIFT 31 -#define GPO_LEVEL_MASK (1UL << GPO_LEVEL_SHIFT) -#define GPO_LEVEL_LOW (0UL << GPO_LEVEL_SHIFT) -#define GPO_LEVEL_HIGH (1UL << GPO_LEVEL_SHIFT) +#define GPO_LEVEL_MASK (1 << GPO_LEVEL_SHIFT) +#define GPO_LEVEL_LOW (0 << GPO_LEVEL_SHIFT) +#define GPO_LEVEL_HIGH (1 << GPO_LEVEL_SHIFT) /* conf1 */ diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 12e262502e7b..0e6fe640b446 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -338,9 +338,9 @@ static void lpt_lp_pm_init(struct device *dev) pci_or_config32(dev, 0xac, 1 << 21); pch_iobp_update(0xED00015C, ~(1 << 11), 0x00003700); - pch_iobp_update(0xED000118, ~0UL, 0x00c00000); - pch_iobp_update(0xED000120, ~0UL, 0x00240000); - pch_iobp_update(0xCA000000, ~0UL, 0x00000009); + pch_iobp_update(0xED000118, ~0, 0x00c00000); + pch_iobp_update(0xED000120, ~0, 0x00240000); + pch_iobp_update(0xCA000000, ~0, 0x00000009); /* Set RCBA CIR28 0x3A84 based on SATA port enables */ data = 0x00001005; @@ -392,7 +392,7 @@ static void enable_clock_gating(struct device *dev) u16 reg16; /* DMI */ - RCBA32_AND_OR(0x2234, ~0UL, 0xf); + RCBA32_AND_OR(0x2234, ~0, 0xf); reg16 = pci_read_config16(dev, GEN_PMCON_1); reg16 |= (1 << 11) | (1 << 12) | (1 << 14); reg16 |= (1 << 2); // PCI CLKRUN# Enable @@ -401,7 +401,7 @@ static void enable_clock_gating(struct device *dev) reg32 = RCBA32(CG); reg32 |= (1 << 22); // HDA Dynamic - reg32 |= (1UL << 31); // LPC Dynamic + reg32 |= (1 << 31); // LPC Dynamic reg32 |= (1 << 16); // PCIe Dynamic reg32 |= (1 << 27); // HPET Dynamic reg32 |= (1 << 28); // GPIO Dynamic @@ -417,7 +417,7 @@ static void enable_lp_clock_gating(struct device *dev) u16 reg16; /* DMI */ - RCBA32_AND_OR(0x2234, ~0UL, 0xf); + RCBA32_AND_OR(0x2234, ~0, 0xf); reg16 = pci_read_config16(dev, GEN_PMCON_1); reg16 &= ~((1 << 11) | (1 << 14)); reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12) | (1 << 13); @@ -463,8 +463,8 @@ static void enable_lp_clock_gating(struct device *dev) RCBA32_OR(0x38c0, 0x3c07); // SPI Dynamic - pch_iobp_update(0xCF000000, ~0UL, 0x00007001); - pch_iobp_update(0xCE00C000, ~1UL, 0x00000000); // bit0=0 in BWG 1.4.0 + pch_iobp_update(0xCF000000, ~0, 0x00007001); + pch_iobp_update(0xCE00C000, ~1, 0x00000000); // bit0=0 in BWG 1.4.0 } static void pch_set_acpi_mode(void) diff --git a/src/southbridge/intel/lynxpoint/pch.c b/src/southbridge/intel/lynxpoint/pch.c index adc011bb7bd3..1a338b14eccd 100644 --- a/src/southbridge/intel/lynxpoint/pch.c +++ b/src/southbridge/intel/lynxpoint/pch.c @@ -97,31 +97,31 @@ void pch_disable_devfn(struct device *dev) break; case PCI_DEVFN(21, 0): /* DMA */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS0, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS0, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 1): /* I2C0 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS1, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS1, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 2): /* I2C1 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS2, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS2, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 3): /* SPI0 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS3, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS3, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 4): /* SPI1 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS4, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS4, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 5): /* UART0 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS5, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS5, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(21, 6): /* UART1 */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS6, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS6, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(22, 0): /* MEI #1 */ RCBA32_OR(FD2, PCH_DISABLE_MEI1); @@ -137,7 +137,7 @@ void pch_disable_devfn(struct device *dev) break; case PCI_DEVFN(23, 0): /* SDIO */ pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS7, ~0UL, SIO_IOBP_FUNCDIS_DIS); + pch_iobp_update(SIO_IOBP_FUNCDIS7, ~0, SIO_IOBP_FUNCDIS_DIS); break; case PCI_DEVFN(25, 0): /* Gigabit Ethernet */ RCBA32_OR(BUC, PCH_DISABLE_GBE); diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 50e0b142af74..66cd05e66a76 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -167,7 +167,7 @@ void mainboard_config_rcba(void); #define GEN_PMCON_2 0xa2 #define GEN_PMCON_3 0xa4 #define PMIR 0xac -#define PMIR_CF9LOCK (1UL << 31) +#define PMIR_CF9LOCK (1 << 31) #define PMIR_CF9GR (1 << 20) /* GEN_PMCON_3 bits */ @@ -315,7 +315,7 @@ void mainboard_config_rcba(void); #define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ #define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ #define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ -#define XHCI_USB3_PORTSC_WPR (1UL << 31) /* Warm Port Reset */ +#define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ #define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ #define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ #define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */ @@ -408,7 +408,7 @@ void mainboard_config_rcba(void); #define RPFN 0x0404 /* 32bit */ /* Root Port configuratinon space hide */ -#define RPFN_HIDE(port) (1UL << (((port) * 4) + 3)) +#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) /* Get the function number assigned to a Root Port */ #define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) /* Set the function number for a Root Port */ diff --git a/src/southbridge/intel/lynxpoint/sata.c b/src/southbridge/intel/lynxpoint/sata.c index 308d3c32cee0..510440b76a31 100644 --- a/src/southbridge/intel/lynxpoint/sata.c +++ b/src/southbridge/intel/lynxpoint/sata.c @@ -122,7 +122,7 @@ static void sata_init(struct device *dev) reg32 |= 1 << 18; /* BWG step 10 */ reg32 |= 1 << 29; /* BWG step 11 */ if (pch_is_lp()) { - reg32 &= ~((1UL << 31) | (1 << 30)); + reg32 &= ~((1 << 31) | (1 << 30)); reg32 |= 1 << 23; reg32 |= 1 << 24; /* Disable listen mode (hotplug) */ } @@ -283,7 +283,7 @@ static void sata_init(struct device *dev) reg32 = pci_read_config32(dev, 0x300); reg32 |= (1 << 17) | (1 << 16); - reg32 |= (1UL << 31) | (1 << 30) | (1 << 29); + reg32 |= (1 << 31) | (1 << 30) | (1 << 29); pci_write_config32(dev, 0x300, reg32); } diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c index 9a5e5c056111..8b791f770b5c 100644 --- a/src/southbridge/intel/lynxpoint/smihandler.c +++ b/src/southbridge/intel/lynxpoint/smihandler.c @@ -348,7 +348,7 @@ static void southbridge_smi_pm1(void) if (pm1_sts & PWRBTN_STS) { /* power button pressed */ elog_gsmi_add_event(ELOG_TYPE_POWER_BUTTON); - disable_pm1_control(-1UL); + disable_pm1_control(-1); enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10)); } } |