| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB |
A | |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia493fd28c362d2c0c343c2d121f6611cfd8f7f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The unit of dram speed is MT/s so append it on variable name.
BUG=b:229549930
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I83c780440613050c0202f95d5f64991b61d9c280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times
are greater than 500ms, which is the spec for Chromebooks.
The actual kernel timing has been measured, and given the ACPI delay
after deasserting reset in addition to the delay until the kernel
driver accesses the device, delaying only 200ms in the ACPI method is
also sufficient to meet the 300ms requirement.
BUG=b:223936777
BRANCH=none
TEST=build and test touchscreen function on DUT.
TEST=suspend, wake DUT and check touchscreen function.
Change-Id: I6b04cf6392d924aed01ca36b720f889b88d92311
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL adds the delay time into the RTD3 sequence, which will turn
off the eMMC controller (a true D3cold state) during the RTD3 sequence.We checked power on sequence requires enable pin prior to reset pin, added delay to meet the sequence and test passed on various eMMC SKUs.Base on BH799BB_Preliminary_DS_R079_20201124.pdf in chapter 7.2.
BUG=b:224648680
TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage
test suspend stress 2500 cycles passed on primus
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I1ab4fdf0ee73b819b3c203e995ac9d5ae0d24bd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
coreboot chip.h files mainly contains variable which allows board to
fill platform configuration through devicetree.
Since many of this configuration involves FSP UPDs, variable names were
in camel case which aligned with UPD naming convention.
By default coreboot follow snake case variable naming, so cleaning up
file to align all variable names as per coreboot convention.
During renaming process, this patch also removes unused variables
listed below:
-> SataEnable // Checked in SoC code based on PCI dev enabled status
-> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used
Note: Since separating out changes into smaller CL might break the
compilation for the patch set, this is being pushed as a single big CL.
BUG=None
BRANCH=firmware-brya-14505.B
TEST=All boards using ADL SoC compiles with the CL.
Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the BayHub eMMC enable pin is using the default
configuration from the baseboard, which leads to RTD3 not being able
to control the GPIO when exiting and entering suspend. To fix this,
program the GPIO in the ramstage GPIO table.
BUG=b:222436260
TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage
scope enable pin while performing suspend stress and enable pin
works as expected.
test suspend stress 1000 cycles passed on primus.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I1b6f164cc326bd368addb1e143ad2cbd449bb08d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the BayHub eMMC controller is only going into its reset
state when the RTD3 sequence is initiated. This causes it to
still consume too much power in suspend states. This CL adds the
power enable GPIO into the RTD3 sequence as well, which will turn
off the eMMC controller (a true D3cold state) during the RTD3
sequence.
BUG=b:222436260
TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage
test suspend stress 100 cycles passed on primus.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I2fec6a30707fb1a258cdcc73b0ce38252b6f77c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With GPP_B3 locked, primus eMMC SKU encounter eMMC storage lost after
warm reboot.
Config GPP_B3 unlocked to make reboot works on primus. Also set
GPP_B3 to low in early_gpio_table to meet eMMC-PCIe bridge IC power
on sequence.
BUG=b:221488504
TEST=USE="project_primus" emerge-brya coreboo chromeos-bootimage
test reboot 30 cycles passed on primus.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: Ifd5f9d59d33cd1c5ebe0454ab3aa4c5641c16ff6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61828
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic97d48633ef1f246c181046ec32ab81614ba5ceb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
primus boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I71f7391df6d827b75f87e54e17f6f7983a9e829b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: If610e6b3c849d982345ed1b8607ffd2af105dc51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This applies a configuration lock to the TPM I2C and IRQ GPIO for
all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The factory versions (minor version 22) of cr50 FW have an issue with
producing short interrupt pulses, which can be missed by the ADL PCH
if autonomous GPIO power management is enabled, therefore instead of
continually adding the setting to all the variants, move it to the
baseboard instead.
Change-Id: I337f1e9e8f958c02bb73e6701a06c0b88a4757d7
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After checking them against schematics, a few unused GPIOs that were inherited
from the baseboard were missed, so this CL programs them as PAD_NC.
GPP_B2 => non-use
GPP_B15 => non-use (for FPR)
GPP_D3 => non-use (Test point)
GPP_E21 => non-use (for LCLW Detect)
BUG=b:211721639
TEST= USE="project_primus" emerge-brya coreboot
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I4e269bc6fb6eda7b2de57e1a9c900864d3e86e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The board ID check for audio codec is no longer required, therefore
remove it.
BUG=b:210705216
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ifbe838186da2e64737a9ffb557cf324124e79a9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, the pmc_mux/conn driver uses integer fields to store the
USB-2 and USB-3 port numbers from the SoC's point of view. Specifying
these as integers in the devicetree is error-prone, and this
information can instead be represented using pointers to the USB-2 and
USB-3 devices. The port numbers can then be obtained from the paths of
the linked devices, i.e. dev->path.usb.port_id.
Modify the driver to store device pointers instead of integer port
numbers, and update all devicetrees using the driver. These are the
mainboards affected (all are Intel TGL or ADL based):
google/brya
google/volteer
intel/adlrvp
intel/shadowmountain
intel/tglrvp
system76/darp7
system76/galp5
system76/lemp10
Command used to update the devicetrees:
git grep -l "usb._port_number" src/mainboard/ | \
xargs sed -i \
-e 's/register "usb2_port_number" = "\(.*\)"/use usb2_port\1 as usb2_port/g' \
-e 's/register "usb3_port_number" = "\(.*\)"/use tcss_usb3_port\1 as usb3_port/g'
BUG=b:208502191
TEST=Build test all affected boards. On brya0, boot device and check
that the ACPI tables generated with and without the change are the same.
Change-Id: I5045b8ea57e8ca6f9ebd7d68a19486736b7e2809
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
None of the touchscreens used in the brya program (any brya board)
should require exporting of GPIOs in the ACPI _CRS method for any i2c
device. This can cause i2c devices to malfunction or cause timing
sequence violations if:
1) ACPI exports a PowerResource for the device that uses GPIOs that are
also exported in _CRS
2) The kernel driver for the device uses the GPIOs exported in _CRS for
its own purposes. This means the state of the pin is out of sync
between platform firmware and the kernel. The Linux ELAN I2C
touchcsreen driver (https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/upstream/drivers/input/touchscreen/elants_i2c.c;l=1429)
is one example of this.
Therefore, add disable_gpio_export_in_crs to all brya variants that use
the drivers/i2c/generic or drivers/i2c/hid chip drivers.
Change-Id: Ib4475bd0dc885e230911de6298fd95baa868ef29
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Because primus have five sensors,we need to define 5 sensors.
BUG=b:200836803
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I02fb8eee644f9999d9c5d48e3a056499d968f85d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
BUG=b:204844399
TEST=USE="project_primus emerge-brya coreboot" and verified
the setting meets the audible noise specification
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I0e0baf78a841278efda912cc5e4e9970329aacf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue.
BUG=b:209568644
BRANCH=none
TEST=build coreboot and system boot into OS.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|