From e8b297ed260d5b66a310da65587caca0f5dc5035 Mon Sep 17 00:00:00 2001 From: Jason Glenesk Date: Wed, 23 Feb 2022 16:08:27 -0800 Subject: Documentation/releases: Update 4.16 release notes Update details for upcoming 4.16 release Change-Id: Iea88b3a4025ae6a57524e08bf5ecef984810baeb Signed-off-by: Jason Glenesk Reviewed-on: https://review.coreboot.org/c/coreboot/+/62302 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth Reviewed-by: Paul Menzel --- Documentation/releases/coreboot-4.16-relnotes.md | 281 ++++++++++++++++++++++- 1 file changed, 272 insertions(+), 9 deletions(-) (limited to 'Documentation/releases/coreboot-4.16-relnotes.md') diff --git a/Documentation/releases/coreboot-4.16-relnotes.md b/Documentation/releases/coreboot-4.16-relnotes.md index 55317a4226d3..0d83acad27c7 100644 --- a/Documentation/releases/coreboot-4.16-relnotes.md +++ b/Documentation/releases/coreboot-4.16-relnotes.md @@ -1,17 +1,75 @@ -Upcoming release - coreboot 4.16 +coreboot 4.16 ================================ -The 4.16 release is planned for February, 2022. +The 4.16 release is planned for February 25th, 2022. -We are increasing the frequency of releases in order to enable others to release quarterly on -a fresher version of coreboot. +Since 4.15 there have been more than 1730 new commits by more than 171 developers. +Of these, over 35 contributed to coreboot for the first time. -Update this document with changes that should be in the release notes. +Welcome to the project! -* Please use Markdown. -* See the past few release notes for the general format. -* The chip and board additions and removals will be updated right - before the release, so those do not need to be added. +Thank you to all the developers who continue to make coreboot the +great open source firmware project that it is. + +New mainboards: +------------------- +* Acer Aspire VN7-572G +* AMD Chausie +* ASROCK H77 Pro4-M +* ASUS P8Z77-M +* Emulation QEMU power9 +* Google -> Agah +* Google -> Anahera4ES +* Google -> Banshee +* Google -> Beadrix +* Google -> Brya4ES +* Google -> Crota +* Google -> Dojo +* Google -> Gimble4ES +* Google -> Herobrine_Rev0 +* Google -> Kingler +* Google -> Kinox +* Google -> Krabby +* Google -> Moli +* Google -> Nereid +* Google -> Nivviks +* Google -> Primus4ES +* Google -> Redrix4ES +* Google -> Skyrim +* Google -> Taeko4ES +* Google -> Taniks +* Google -> Vell +* Google -> Volmar +* Intel Alderlake-N RVP +* Prodrive Atlas +* Star Labs Star Labs StarBook Mk V (i3-1115G4 and i7-1165G7) +* System76 gaze16 3050 +* System76 gaze16 3060 +* System76 gaze16 3060-b + +Removed mainboards: +------------------- +* Google -> Corsola +* Google -> Nasher +* Google -> Stryke + +Added processors: +------------------- +* src/cpu/power9 + + +Submodule Updates +----------------- +/3rdparty/amd_blobs (6 commits) +/3rdparty/arm-trusted-firmware (965 commits) +/3rdparty/blobs (30 commits) +/3rdparty/chromeec (2212 commits) +/3rdparty/intel-microcode (1 commits) +/3rdparty/qc_blobs (13 commits) +/3rdparty/vboot (44 commits) + +Deprecations and incompatible changes +------------------------------------- Significant changes ------------------- @@ -19,9 +77,214 @@ Significant changes ### Add significant changes here ### Option to disable Intel Management Engine + Disable the Intel (Converged Security) Management Engine ((CS)ME) via HECI based on Intel Core processors from Skylake to Alder Lake. State is set based on a CMOS value of `me_state`. A value of `0` will result in a (CS)ME state of `0` (working) and value of `1` will result in a (CS)ME state of `3` (disabled). For an example CMOS layout and more info, see [cse.c](../../src/soc/intel/common/block/cse/cse.c). + +### Add [AMD] apcb_v3_edit tool + +apcb_v3_edit.py tool edits APCB V3 binaries. Specifically it will inject +up to 16 SPDs into an existing APCB. The APCB must have a magic number +at the top of each SPD slot. + + +### Allow enable/disable ME via CMOS + +Add .enable method that will set the CSME state. The state is based on +the new CMOS option me_state, with values of 0 and 1. The method is very +stable when switching between different firmware platforms. + +This method should not be used in combination with USE_ME_CLEANER. + +State 1 will result in: +ME: Current Working State : 4 +ME: Current Operation State : 1 +ME: Current Operation Mode : 3 +ME: Error Code : 2 + +State 0 will result in: +ME: Current Working State : 5 +ME: Current Operation State : 1 +ME: Current Operation Mode : 0 +ME: Error Code : 0 + +### Move LAPIC configuration to MP init + +Implementation for setup_lapic() did two things -- call +enable_lapic() and virtual_wire_mode_init(). + +In PARALLEL_MP case enable_lapic() was redundant as it +was already executed prior to initialize_cpu() call. +For the !PARALLEL_MP case enable_lapic() is added to +AP CPUs. + +### Add ANSI escape sequences for highlighting + +This patch adds ANSI escape sequences to highlight a log line based on +its loglevel to the output of "interactive" consoles that are meant to +be displayed on a terminal (e.g. UART). This should help make errors and +warnings stand out better among the usual spew of debug messages. For +users whose terminal or use case doesn't support these sequences for +some reason (or who simply don't like them), they can be disabled with a +Kconfig. + +While ANSI escape sequences can be used to add color, minicom (the +presumably most common terminal emulator for UART endpoints?) doesn't +support color output unless explicitly enabled (via -c command line +flag), and other terminal emulators may have similar restrictions, so in +an effort to make this as widely useful by default as possible I have +chosen not to use color codes and implement this highlighting via +bolding, underlining and inverting alone (which seem to go through in +all cases). If desired, support for separate color highlighting could be +added via Kconfig later. + +### Add cbmem_dump_console + +This function is similar to cbmem_dump_console_to_uart except it uses +the normally configured consoles. A console_paused flag was added to +prevent the cbmem console from writing to itself. + +### Add coreboot-configurator + +A simple GUI to change settings in coreboot's CBFS, via the nvramtool utility. + +### Update to NixOS 21.11 + +Update configs so that they work with NixOS 21.11. Drop `iasl` package +since it was replaced with `acpica-tools`. + +### Move to v2021.10 + +Move to building the latest U-Boot. + +### Support systems with >128 cores + +Each time the spinlock is acquired a byte is decreased and then the +sign of the byte is checked. If there are more than 128 cores the sign +check will overflow. An easy fix is to increase the word size of the +spinlock acquiring and releasing. + +### Add [samsung] sx9360 [proximity sensor] driver +Add driver for setting up Semtech sx9360 SAR sensor. +The driver is based on sx9310.c. The core of the driver is the same, but +the bindings are slightly different. + +Registers are documented in the kernel tree: +Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml +[https://patchwork.kernel.org/project/linux-iio/patch/20211213024057.3824985-4-gwendal@chromium.org/] + +### Add driver for Genesys Logic [SD Controller] GL9750 + +The device is a PCIe Gen1 to SD 3.0 card reader controller to be +used in the Chromebook. The datasheet name is GL9750S and the revision +is 01. + +The patch disables ASPM L0s. + +### Add support for Realtek RT8125 + +The Realtek RT8168 and RT8125 have a similar programming interface, +therefore add the PCI device ID for the RT8125 into driver for support. + +### Add Fibocom 5G WWAN ACPI support + +Support PXSX._RST and PXSX.MRST._RST for warm and cold reset. +PXSX._RST is invoked on driver removal. + +build dependency: + soc/intel/common/block/pcie/rtd3 + +This driver will use the rtd3 methods for the same parent in the device +tree. The rtd3 chip needs to be added on the same root port in the +devicetree separately. + +### Fix bug in vr_config + +The `cpu_get_power_max()` function returns the TDP in milliwatts, but +the vr_config code interprets the value in watts. Divide the value by +1000 to fix this. + +This also fixes an integer overflow when `cpu_get_power_max()` returns +a value greater than 65535 (UINT16_MAX). + +### Make mixed topo work + +When using a mixed memory topology with DDR4, it's not possible to boot +when no DIMMs are installed, even though memory-down is available. This +happens because the DIMM SPD length defaults to 256 when no DIMM SPD is +available. Relax the length check when no DIMMs are present to overcome +this problem. + +### Add FSP 2.3 support + +FSP 2.3 specification introduces following changes: + +1. FSP_INFO_HEADER changes + Updated SpecVersion from 0x22 to 0x23 + Updated HeaderRevision from 5 to 6 + Added ExtendedImageRevision + FSP_INFO_HEADER length changed to 0x50 + +2. Added FSP_NON_VOLATILE_STORAGE_HOB2 + +Following changes are implemented in the patch to support FSP 2.3: + +- Add Kconfig option +- Update FSP build binary version info based on ExtendedImageRevision + field in header +- New NV HOB related changes will be pushed as part of another patch + +### Join hash calculation for verification and measurement + +This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT +is enabled from the lookup step into the code where a file is actually +loaded or mapped from flash. This has the advantage that CBFS routines +which just look up a file to inspect its metadata (e.g. cbfs_get_size()) +do not cause the file to be measured twice. It also removes the existing +inefficiency that files are loaded twice when measurement is enabled +(once to measure and then again when they are used). When CBFS +verification is enabled and uses the same hash algorithm as the TPM, we +are even able to only hash the file a single time and use the result for +both purposes. + +### Skip FSP Notify APIs + +Alder Lake SoC deselects Kconfigs as below: +- USE_FSP_NOTIFY_PHASE_READY_TO_BOOT +- USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE +to skip FSP notify APIs (Ready to boot and End of Firmware) and make +use of native coreboot driver to perform SoC recommended operations +prior booting to payload/OS. + +Additionally, created a helper function `heci_finalize()` to keep HECI +related operations separated for easy guarding again config. + +TODO: coreboot native implementation to skip FSP notify phase API (post +pci enumeration) is still WIP. + +### Add support for PCIe Resizable BARs + +Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can +indicates support for "Resizable BARs" via a PCIe extended capability. + +When support this capability is indicated by the device, the size of +each BAR is determined in a different way than the normal "moving +bits" method. Instead, a pair of capability and control registers is +allocated in config space for each BAR, which can be used to both +indicate the different sizes the device is capable of supporting for +the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and +to also inform the device of the size that the allocator actually +reserved for the MMIO range. + +This patch adds a Kconfig for a mainboard to select if it knows that it +will have a device that requires this support during PCI enumeration. +If so, there is a corresponding Kconfig to indicate the maximum number +of bits of address space to hand out to devices this way (again, limited +by what devices can support and each individual system may want to +support, but just like above, this number can range from 20 to 63) If +the device can support more bits than this Kconfig, the resource request +is truncated to the number indicated by this Kconfig. -- cgit v1.2.3