From c049c80eb1a775952c1e19bf1eb8d047b6929c21 Mon Sep 17 00:00:00 2001 From: Wisley Chen Date: Mon, 19 Jul 2021 20:11:39 +0600 Subject: mb/google/brya/variants/redrix: Configure GPIOs according to schematics Update initial gpio configuration for redrix BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen Change-Id: I2294fb3bdba832677038cfe24b5014014c7f03e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56428 Reviewed-by: Tim Wawrzynczak Tested-by: build bot (Jenkins) --- .../google/brya/variants/redrix/Makefile.inc | 4 + src/mainboard/google/brya/variants/redrix/gpio.c | 121 +++++++++++++++++++++ 2 files changed, 125 insertions(+) create mode 100644 src/mainboard/google/brya/variants/redrix/Makefile.inc create mode 100644 src/mainboard/google/brya/variants/redrix/gpio.c (limited to 'src/mainboard') diff --git a/src/mainboard/google/brya/variants/redrix/Makefile.inc b/src/mainboard/google/brya/variants/redrix/Makefile.inc new file mode 100644 index 000000000000..8fe978f6effa --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix/Makefile.inc @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootblock-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/redrix/gpio.c b/src/mainboard/google/brya/variants/redrix/gpio.c new file mode 100644 index 000000000000..f53809e2a832 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix/gpio.c @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include +#include +#include +#include +#include + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A17 : DISP_MISCC ==> NC */ + PAD_NC(GPP_A17, NONE), + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + + /* B3 : PROC_GP2 ==> NC */ + PAD_NC(GPP_B3, NONE), + /* B15 : TIME_SYNC0 ==> NC */ + PAD_NC(GPP_B15, NONE), + + /* C3 : SML0CLK ==> NC */ + PAD_NC(GPP_C3, NONE), + /* C4 : SML0DATA ==> NC */ + PAD_NC(GPP_C4, NONE), + + /* D7 : SRCCLKREQ2# ==> NC */ + PAD_NC(GPP_D7, NONE), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_NC(GPP_D13, NONE), + + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E3 : PROC_GP0 ==> NC */ + PAD_NC(GPP_E3, NONE), + /* E7 : PROC_GP1 ==> NC */ + PAD_NC(GPP_E7, NONE), + /* E20 : DDP2_CTRLCLK ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E22 : DDPA_CTRLCLK ==> NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : DDPA_CTRLDATA ==> NC */ + PAD_NC(GPP_E23, NONE), + + /* F20 : EXT_PWR_GATE# ==> NC */ + PAD_NC(GPP_F20, NONE), + + /* H3 : SX_EXIT_HOLDOFF# ==> NC */ + PAD_NC(GPP_H3, NONE), + /* H20 : IMGCLKOUT1 ==> NC */ + PAD_NC(GPP_H20, NONE), + /* H21 : IMGCLKOUT2 ==> Privacy screen */ + PAD_CFG_GPO(GPP_H21, 0, DEEP), + + /* R6 : I2S_PCH_TX_SPKR_RX ==> NC */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S_PCH_RX_SPKR_TX ==> NC */ + PAD_NC(GPP_R7, NONE), + + /* S4 : SNDW2_CLK ==> NC */ + PAD_NC(GPP_S4, NONE), + /* S5 : SNDW2_DATA ==> NC */ + PAD_NC(GPP_S5, NONE), + /* S6 : SNDW3_CLK ==> NC */ + PAD_NC(GPP_S6, NONE), + /* S7 : SNDW3_DATA ==> NC */ + PAD_NC(GPP_S7, NONE), + +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_H13, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} -- cgit v1.2.3