From 60c519ee875ec00554869a3f0218b40409f6c974 Mon Sep 17 00:00:00 2001
From: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Date: Sun, 22 May 2022 10:47:00 +0530
Subject: mb/intel/adlrvp: Enable DPTF for ADL-N RVP

BUG=None
BRANCH=None
TEST=Build FW and test on adln_rvp board
Verified thermal throttling successfully when participant reaches temp threshold as per Passive Policy.
Verified fan control successfully when participant reaches temp threshold as per Active Policy.
Also, verified system shutdown when Temperature of participants are reaching threshold as per Critical policy.

Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Change-Id: Icafacfca6a026ec3b42906790831f11fd2f1b085
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
---
 src/mainboard/intel/adlrvp/devicetree_n.cb | 101 +++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

(limited to 'src')

diff --git a/src/mainboard/intel/adlrvp/devicetree_n.cb b/src/mainboard/intel/adlrvp/devicetree_n.cb
index 4fc655c9e9b6..936e62504892 100644
--- a/src/mainboard/intel/adlrvp/devicetree_n.cb
+++ b/src/mainboard/intel/adlrvp/devicetree_n.cb
@@ -16,6 +16,9 @@ chip soc/intel/alderlake
 	# Sagv Configuration
 	register "sagv" = "SaGv_Enabled"
 
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
 	# eMMC HS400
 	register "emmc_enable_hs400_mode" = "1"
 
@@ -153,6 +156,104 @@ chip soc/intel/alderlake
 
 	device domain 0 on
 		device ref igpu on end
+		device ref dtt on
+			chip drivers/intel/dptf
+
+				## sensor information
+				register "options.tsr[0].desc" = ""Ambient""
+				register "options.tsr[1].desc" = ""Battery""
+				register "options.tsr[2].desc" = ""DDR""
+				register "options.tsr[3].desc" = ""Skin""
+				register "options.tsr[4].desc" = ""VR""
+
+				## Active Policy
+				# TODO: below values are initial reference values only
+				register "policies.active" = "{
+					[0] = {
+							.target = DPTF_CPU,
+							.thresholds = {
+								TEMP_PCT(95, 90),
+								TEMP_PCT(90, 80),
+							}
+						},
+					[1] = {
+							.target = DPTF_TEMP_SENSOR_0,
+							.thresholds = {
+								TEMP_PCT(80, 90),
+								TEMP_PCT(70, 80),
+							}
+						}
+				}"
+
+				## Passive Policy
+				# TODO: below values are initial reference values only
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,		CPU,	       95, 10000),
+					[1] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_0, 85, 50000),
+					[2] = DPTF_PASSIVE(CHARGER,	TEMP_SENSOR_1, 85, 50000),
+					[3] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_2, 85, 50000),
+					[4] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_3, 85, 50000),
+					[5] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_4, 85, 50000),
+				}"
+
+				## Critical Policy
+				# TODO: below values are initial reference values only
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,	  105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN),
+					[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 95, SHUTDOWN),
+					[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 95, SHUTDOWN),
+					[5] = DPTF_CRITICAL(TEMP_SENSOR_4, 95, SHUTDOWN),
+				}"
+
+				## Power Limits Control
+				register "controls.power_limits" = "{
+					.pl1 = {
+							.min_power = 3000,
+							.max_power = 15000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 200,
+					},
+					.pl2 = {
+							.min_power = 25000,
+							.max_power = 35000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 1000,
+					}
+				}"
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 3000 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+
+				## Fan Performance Control (Percent, Speed, Noise, Power)
+				register "controls.fan_perf" = "{
+					[0] = {  90, 6700, 220, 2200, },
+					[1] = {  80, 5800, 180, 1800, },
+					[2] = {  70, 5000, 145, 1450, },
+					[3] = {  60, 4900, 115, 1150, },
+					[4] = {  50, 3838,  90,  900, },
+					[5] = {  40, 2904,  55,  550, },
+					[6] = {  30, 2337,  30,  300, },
+					[7] = {  20, 1608,  15,  150, },
+					[8] = {  10,  800,  10,  100, },
+					[9] = {   0,    0,   0,   50, }
+				}"
+
+				## Fan options
+				register "options.fan.fine_grained_control" = "1"
+				register "options.fan.step_size" = "2"
+
+				device generic 0 alias dptf_policy on end
+			end
+		end
 		device ref ipu on
 			chip drivers/intel/mipi_camera
 				register "acpi_uid" = "0x50000"
-- 
cgit v1.2.3