/* * This file is part of the coreboot project. * * Copyright (C) 2005 Linux Networx * (Written by Eric Biederman for Linux Networx) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ #include #include #include #include #include #include #if IS_ENABLED(CONFIG_MMCONF_SUPPORT) unsigned int pciexp_find_extended_cap(device_t dev, unsigned int cap) { unsigned int this_cap_offset, next_cap_offset; unsigned int this_cap, cafe; this_cap_offset = PCIE_EXT_CAP_OFFSET; do { this_cap = pci_mmio_read_config32(dev, this_cap_offset); next_cap_offset = this_cap >> 20; this_cap &= 0xffff; cafe = pci_mmio_read_config32(dev, this_cap_offset + 4); cafe &= 0xffff; if (this_cap == cap) return this_cap_offset; else if (cafe == cap) return this_cap_offset + 4; else this_cap_offset = next_cap_offset; } while (next_cap_offset != 0); return 0; } #endif #if CONFIG_PCIEXP_COMMON_CLOCK /* * Re-train a PCIe link */ #define PCIE_TRAIN_RETRY 10000 static int pciexp_retrain_link(device_t dev, unsigned cap) { unsigned try = PCIE_TRAIN_RETRY; u16 lnk; /* Start link retraining */ lnk = pci_read_config16(dev, cap + PCI_EXP_LNKCTL); lnk |= PCI_EXP_LNKCTL_RL; pci_write_config16(dev, cap + PCI_EXP_LNKCTL, lnk); /* Wait for training to complete */ while (try--) { lnk = pci_read_config16(dev, cap + PCI_EXP_LNKSTA); if (!(lnk & PCI_EXP_LNKSTA_LT)) return 0; udelay(100); } printk(BIOS_ERR, "%s: Link Retrain timeout\n", dev_path(dev)); return -1; } /* * Check the Slot Clock Configuration for root port and endpoint * and enable Common Clock Configuration if possible. If CCC is * enabled the link must be retrained. */ static void pciexp_enable_common_clock(device_t root, unsigned root_cap, device_t endp, unsigned endp_cap) { u16 root_scc, endp_scc, lnkctl; /* Get Slot Clock Configuration for root port */ root_scc = pci_read_config16(root, root_cap + PCI_EXP_LNKSTA); root_scc &= PCI_EXP_LNKSTA_SLC; /* Get Slot Clock Configuration for endpoint */ endp_scc = pci_read_config16(endp, endp_cap + PCI_EXP_LNKSTA); endp_scc &= PCI_EXP_LNKSTA_SLC; /* Enable Common Clock Configuration and retrain */ if (root_scc && endp_scc) { printk(BIOS_INFO, "Enabling Common Clock Configuration\n"); /* Set in endpoint */ lnkctl = pci_read_config16(endp, endp_cap + PCI_EXP_LNKCTL); lnkctl |= PCI_EXP_LNKCTL_CCC; pci_write_config16(endp, endp_cap + PCI_EXP_LNKCTL, lnkctl); /* Set in root port */ lnkctl = pci_read_config16(root, root_cap + PCI_EXP_LNKCTL); lnkctl |= PCI_EXP_LNKCTL_CCC; pci_write_config16(root, root_cap + PCI_EXP_LNKCTL, lnkctl); /* Retrain link if CCC was enabled */ pciexp_retrain_link(root, root_cap); } } #endif /* CONFIG_PCIEXP_COMMON_CLOCK */ #if CONFIG_PCIEXP_CLK_PM static void pciexp_enable_clock_power_pm(device_t endp, unsigned endp_cap) { /* check if per port clk req is supported in device */ u32 endp_ca; u16 lnkctl; endp_ca = pci_read_config32(endp, endp_cap + PCI_EXP_LNKCAP); if ((endp_ca & PCI_EXP_CLK_PM) == 0) { printk(BIOS_INFO, "PCIE CLK PM is not supported by endpoint"); return; } lnkctl = pci_read_config16(endp, endp_cap + PCI_EXP_LNKCTL); lnkctl = lnkctl | PCI_EXP_EN_CLK_PM; pci_write_config16(endp, endp_cap + PCI_EXP_LNKCTL, lnkctl); } #endif /* CONFIG_PCIEXP_CLK_PM */ #if IS_ENABLED(CONFIG_PCIEXP_L1_SUB_STATE) && IS_ENABLED(CONFIG_MMCONF_SUPPORT) static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) { u32 reg32; reg32 = pci_mmio_read_config32(dev, reg); reg32 &= mask; reg32 |= or; pci_mmio_write_config32(dev, reg, reg32); } static void pciexp_config_max_latency(device_t root, device_t dev) { unsigned int cap; cap = pciexp_find_extended_cap(dev, PCIE_EXT_CAP_LTR_ID); if ((cap) && (root->ops->ops_pci != NULL) && (root->ops->ops_pci->set_L1_ss_latency != NULL)) root->ops->ops_pci->set_L1_ss_latency(dev, cap + 4); } static void pciexp_enable_ltr(device_t dev) { unsigned int cap; cap = pci_find_capability(dev, PCI_CAP_ID_PCIE); if(!cap) { printk(BIOS_INFO, "Failed to enable LTR for dev = %s\n", dev_path(dev)); return; } pcie_update_cfg(dev, cap + 0x28, ~(1 << 10), 1 << 10); } static unsigned char pciexp_L1_substate_cal(device_t dev, unsigned int endp_cap, unsigned int *data) { unsigned char mult[4] = {2, 10, 100, 0}; unsigned int L1SubStateSupport = *data & 0xf; unsigned int comm_mode_rst_time = (*data >> 8) & 0xff; unsigned int power_on_scale = (*data >> 16) & 0x3; unsigned int power_on_value = (*data >> 19) & 0x1f; unsigned int endp_data = pci_mmio_read_config32(dev, endp_cap + 4); unsigned int endp_L1SubStateSupport = endp_data & 0xf; unsigned int endp_comm_mode_restore_time = (endp_data >> 8) & 0xff; unsigned int endp_power_on_scale = (endp_data >> 16) & 0x3; unsigned int endp_power_on_value = (endp_data >> 19) & 0x1f; L1SubStateSupport &= endp_L1SubStateSupport; if (L1SubStateSupport == 0) return 0; if (power_on_value * mult[power_on_scale] < endp_power_on_value * mult[endp_power_on_scale]) { power_on_value = endp_power_on_value; power_on_scale = endp_power_on_scale; } if (comm_mode_rst_time < endp_comm_mode_restore_time) comm_mode_rst_time = endp_comm_mode_restore_time; *data = (comm_mode_rst_time << 8) | (power_on_scale << 16) | (power_on_value << 19) | L1SubStateSupport; return 1; } static void pciexp_L1_substate_commit(device_t root, device_t dev, unsigned int root_cap, unsigned int end_cap) { device_t dev_t; unsigned char L1_ss_ok; unsigned int rp_L1_support = pci_mmio_read_config32(root, root_cap + 4); unsigned int L1SubStateSupport; unsigned int comm_mode_rst_time; unsigned int power_on_scale; unsigned int endp_power_on_value; for (dev_t = dev; dev_t; dev_t = dev_t->sibling) { /* * rp_L1_support is init'd above from root port. * it needs coordination with endpoints to reach in common. * if certain endpoint doesn't support L1 Sub-State, abort * this feature enabling. */ L1_ss_ok = pciexp_L1_substate_cal(dev_t, end_cap, &rp_L1_support); if (!L1_ss_ok) return; } L1SubStateSupport = rp_L1_support & 0xf; comm_mode_rst_time = (rp_L1_support >> 8) & 0xff; power_on_scale = (rp_L1_support >> 16) & 0x3; endp_power_on_value = (rp_L1_support >> 19) & 0x1f; printk(BIOS_INFO, "L1 Sub-State supported from root port %d\n", root->path.pci.devfn >> 3); printk(BIOS_INFO, "L1 Sub-State Support = 0x%x\n", L1SubStateSupport); printk(BIOS_INFO, "CommonModeRestoreTime = 0x%x\n", comm_mode_rst_time); printk(BIOS_INFO, "Power On Value = 0x%x, Power On Scale = 0x%x\n", endp_power_on_value, power_on_scale); pciexp_enable_ltr(root); pcie_update_cfg(root, root_cap + 0x08, ~0xff00, (comm_mode_rst_time << 8)); pcie_update_cfg(root, root_cap + 0x0c , 0xffffff04, (endp_power_on_value << 3) | (power_on_scale)); pcie_update_cfg(root, root_cap + 0x08, ~0xe3ff0000, (1 << 21) | (1 << 23) | (1 << 30)); pcie_update_cfg(root, root_cap + 0x08, ~0x1f, L1SubStateSupport); for (dev_t = dev; dev_t; dev_t = dev_t->sibling) { pcie_update_cfg(dev_t, end_cap + 0x0c , 0xffffff04, (endp_power_on_value << 3) | (power_on_scale)); pcie_update_cfg(dev_t, end_cap + 0x08, ~0xe3ff0000, (1 << 21) | (1 << 23) | (1 << 30)); pcie_update_cfg(dev_t, end_cap + 0x08, ~0x1f, L1SubStateSupport); pciexp_enable_ltr(dev_t); pciexp_config_max_latency(root, dev_t); } } static void pciexp_config_L1_sub_state(device_t root, device_t dev) { unsigned int root_cap, end_cap; /* Do it for function 0 only */ if (dev->path.pci.devfn & 0x7) return; root_cap = pciexp_find_extended_cap(root, PCIE_EXT_CAP_L1SS_ID); if (!root_cap) return; end_cap = pciexp_find_extended_cap(dev, PCIE_EXT_CAP_L1SS_ID); if (!end_cap) { end_cap = pciexp_find_extended_cap(dev, 0xcafe); if (!end_cap) return; } pciexp_L1_substate_commit(root, dev, root_cap, end_cap); } #endif /* CONFIG_PCIEXP_L1_SUB_STATE */ #if CONFIG_PCIEXP_ASPM /* * Determine the ASPM L0s or L1 exit latency for a link * by checking both root port and endpoint and returning * the highest latency value. */ static int pciexp_aspm_latency(device_t root, unsigned root_cap, device_t endp, unsigned endp_cap, enum aspm_type type) { int root_lat = 0, endp_lat = 0; u32 root_lnkcap, endp_lnkcap; root_lnkcap = pci_read_config32(root, root_cap + PCI_EXP_LNKCAP); endp_lnkcap = pci_read_config32(endp, endp_cap + PCI_EXP_LNKCAP); /* Make sure the link supports this ASPM type by checking * capability bits 11:10 with aspm_type offset by 1 */ if (!(root_lnkcap & (1 << (type + 9))) || !(endp_lnkcap & (1 << (type + 9)))) return -1; /* Find the one with higher latency */ switch (type) { case PCIE_ASPM_L0S: root_lat = (root_lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12; endp_lat = (endp_lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12; break; case PCIE_ASPM_L1: root_lat = (root_lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15; endp_lat = (endp_lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15; break; default: return -1; } return (endp_lat > root_lat) ? endp_lat : root_lat; } /* * Enable ASPM on PCIe root port and endpoint. * * Returns APMC value: * -1 = Error * 0 = no ASPM * 1 = L0s Enabled * 2 = L1 Enabled * 3 = L0s and L1 Enabled */ static enum aspm_type pciexp_enable_aspm(device_t root, unsigned root_cap, device_t endp, unsigned endp_cap) { const char *aspm_type_str[] = { "None", "L0s", "L1", "L0s and L1" }; enum aspm_type apmc = PCIE_ASPM_NONE; int exit_latency, ok_latency; u16 lnkctl; u32 devcap; /* Get endpoint device capabilities for acceptable limits */ devcap = pci_read_config32(endp, endp_cap + PCI_EXP_DEVCAP); /* Enable L0s if it is within endpoint acceptable limit */ ok_latency = (devcap & PCI_EXP_DEVCAP_L0S) >> 6; exit_latency = pciexp_aspm_latency(root, root_cap, endp, endp_cap, PCIE_ASPM_L0S); if (exit_latency >= 0 && exit_latency <= ok_latency) apmc |= PCIE_ASPM_L0S; /* Enable L1 if it is within endpoint acceptable limit */ ok_latency = (devcap & PCI_EXP_DEVCAP_L1) >> 9; exit_latency = pciexp_aspm_latency(root, root_cap, endp, endp_cap, PCIE_ASPM_L1); if (exit_latency >= 0 && exit_latency <= ok_latency) apmc |= PCIE_ASPM_L1; if (apmc != PCIE_ASPM_NONE) { /* Set APMC in root port first */ lnkctl = pci_read_config16(root, root_cap + PCI_EXP_LNKCTL); lnkctl |= apmc; pci_write_config16(root, root_cap + PCI_EXP_LNKCTL, lnkctl); /* Set APMC in endpoint device next */ lnkctl = pci_read_config16(endp, endp_cap + PCI_EXP_LNKCTL); lnkctl |= apmc; pci_write_config16(endp, endp_cap + PCI_EXP_LNKCTL, lnkctl); } printk(BIOS_INFO, "ASPM: Enabled %s\n", aspm_type_str[apmc]); return apmc; } #endif /* CONFIG_PCIEXP_ASPM */ static void pciexp_tune_dev(device_t dev) { device_t root = dev->bus->dev; unsigned int root_cap, cap; cap = pci_find_capability(dev, PCI_CAP_ID_PCIE); if (!cap) return; root_cap = pci_find_capability(root, PCI_CAP_ID_PCIE); if (!root_cap) return; #if CONFIG_PCIEXP_COMMON_CLOCK /* Check for and enable Common Clock */ pciexp_enable_common_clock(root, root_cap, dev, cap); #endif #if CONFIG_PCIEXP_CLK_PM /* Check if per port CLK req is supported by endpoint*/ pciexp_enable_clock_power_pm(dev, cap); #endif #if CONFIG_PCIEXP_L1_SUB_STATE /* Enable L1 Sub-State when both root port and endpoint support */ pciexp_config_L1_sub_state(root, dev); #endif /* CONFIG_PCIEXP_L1_SUB_STATE */ #if CONFIG_PCIEXP_ASPM /* Check for and enable ASPM */ enum aspm_type apmc = pciexp_enable_aspm(root, root_cap, dev, cap); if (apmc != PCIE_ASPM_NONE) { /* Enable ASPM role based error reporting. */ u32 reg32 = pci_read_config32(dev, cap + PCI_EXP_DEVCAP); reg32 |= PCI_EXP_DEVCAP_RBER; pci_write_config32(dev, cap + PCI_EXP_DEVCAP, reg32); } #endif } void pciexp_scan_bus(struct bus *bus, unsigned int min_devfn, unsigned int max_devfn) { device_t child; pciexp_tune_dev(bus->dev); pci_scan_bus(bus, min_devfn, max_devfn); for (child = bus->children; child; child = child->sibling) { if ((child->path.pci.devfn < min_devfn) || (child->path.pci.devfn > max_devfn)) { continue; } pciexp_tune_dev(child); } } void pciexp_scan_bridge(device_t dev) { do_pci_scan_bridge(dev, pciexp_scan_bus); } /** Default device operations for PCI Express bridges */ static struct pci_operations pciexp_bus_ops_pci = { .set_subsystem = 0, }; struct device_operations default_pciexp_ops_bus = { .read_resources = pci_bus_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .init = 0, .scan_bus = pciexp_scan_bridge, .enable = 0, .reset_bus = pci_bus_reset, .ops_pci = &pciexp_bus_ops_pci, };