/* * This file is part of the coreboot project. * * Copyright (C) 2006 AMD * (Written by Yinghai Lu for AMD) * Copyright (C) 2006 MSI * (Written by Bingxun Shi for MSI) * Copyright (C) 2007 Rudolf Marek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ unsigned int get_sbdn(unsigned bus); #include #include #include #include #include #include #include #include #include #include #include #include #include #include "northbridge/amd/amdk8/early_ht.c" #include #include #include #include #include "northbridge/amd/amdk8/setup_resource_map.c" #include #include #define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) #define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) #define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) void memreset(int controllers, const struct mem_controller *ctrl) { } void activate_spd_rom(const struct mem_controller *ctrl) { } int spd_read_byte(unsigned int device, unsigned int address) { return smbus_read_byte(device, address); } #include void do_soft_reset(void) { uint8_t tmp; set_bios_reset(); printk(BIOS_DEBUG, "soft reset\n"); /* PCI reset */ tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); tmp |= 0x01; pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); halt(); } #include "southbridge/via/k8t890/early_car.c" #include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "northbridge/amd/amdk8/raminit.c" #include "lib/generic_sdram.c" #include "cpu/amd/dualcore/dualcore.c" #include "cpu/amd/model_fxx/init_cpus.c" #include "cpu/amd/model_fxx/fidvid.c" #include "northbridge/amd/amdk8/resourcemap.c" unsigned int get_sbdn(unsigned bus) { pci_devfn_t dev; dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); return (dev >> 15) & 0x1f; } static void sio_init(void) { u8 reg; pnp_enter_ext_func_mode(SERIAL_DEV); /* We have 24MHz input. */ reg = pnp_read_config(SERIAL_DEV, 0x24); pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); /* We have GPIO for KB/MS pin. */ reg = pnp_read_config(SERIAL_DEV, 0x2a); pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); /* We have all RESTOUT and even some reserved bits, too. */ reg = pnp_read_config(SERIAL_DEV, 0x2c); pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); pnp_exit_ext_func_mode(SERIAL_DEV); pnp_enter_ext_func_mode(ACPI_DEV); pnp_set_logical_device(ACPI_DEV); /* * Set the delay rising time from PWROK_LP to PWROK_ST to * 300 - 600ms, and 0 to vice versa. */ reg = pnp_read_config(ACPI_DEV, 0xe6); pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ reg = pnp_read_config(ACPI_DEV, 0xe4); pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); pnp_exit_ext_func_mode(ACPI_DEV); pnp_enter_ext_func_mode(GPIO_DEV); pnp_set_logical_device(GPIO_DEV); /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0 = output 1 = input */ pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0 = output 1 = input */ pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ pnp_exit_ext_func_mode(GPIO_DEV); } void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { // Node 0 DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, // Node 1 DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, }; unsigned bsp_apicid = 0; int needs_reset = 0; struct sys_info *sysinfo = &sysinfo_car; sio_init(); winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); enable_rom_decode(); printk(BIOS_INFO, "now booting... romstage\n"); /* Is this a CPU only reset? Or is this a secondary CPU? */ if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0. */ /* Allow the HT devices to be found. */ enumerate_ht_chain(); } printk(BIOS_INFO, "now booting... real_main\n"); if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* Halt if there was a built in self test failure. */ report_bist_failure(bist); setup_default_resource_map(); setup_coherent_ht_domain(); wait_all_core0_started(); printk(BIOS_INFO, "now booting... Core0 started\n"); #if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); #endif init_timer(); ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= k8t890_early_setup_ht(); if (needs_reset) { printk(BIOS_DEBUG, "ht reset -\n"); soft_reset(); } /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ enable_fid_change(); init_fidvid_bsp(bsp_apicid); /* Stop the APs so we can start them later in init. */ allow_all_aps_stop(bsp_apicid); /* It's the time to set ctrl now. */ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); enable_smbus(); sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); post_cache_as_ram(); }