chip northbridge/amd/amdfam10/root_complex	# Root complex
	device cpu_cluster 0 on			# (L)APIC cluster
		chip cpu/amd/socket_F_1207			# CPU socket
			device lapic 0 on end			# Local APIC of the CPU
		end
	end
	device domain 0 on			# PCI domain
		subsystemid 0x1043 0x8162 inherit
		chip northbridge/amd/amdfam10		# Northbridge / RAM controller
			register "maximum_memory_capacity" = "0x1000000000"	# 64GB
			device pci 18.0 on end		# Link 0 == LDT 0
			device pci 18.0 on		# Link 1 == LDT 1 [SB on link 1]
				chip southbridge/nvidia/ck804		# Southbridge
					device pci 0.0 on end			# HT
					device pci 1.0 on			# LPC
						chip superio/winbond/w83627thg	# Super I/O
							device pnp 2e.0 on		# Floppy
								# Set up interface resources
								io 0x60 = 0x3f0
								irq 0x70 = 6
								drq 0x74 = 2
							end
							device pnp 2e.1 off end		# Parallel port
							device pnp 2e.2 on		# Com1
								# Set up interface resources
								io 0x60 = 0x3f8
								irq 0x70 = 4
							end
							device pnp 2e.3 on		# Com2
								# Set up interface resources
								io 0x60 = 0x2f8
								irq 0x70 = 3
								# Select correct package I/O pins
								io 0xf1 = 0x04
							end
							device pnp 2e.5 on		# PS/2 keyboard & mouse
								# Set up interface resources
								io 0x60 = 0x60
								io 0x62 = 0x64
								irq 0x70 = 1
								irq 0x72 = 12
							end
							device pnp 2e.7 off end		# Game port, MIDI, GPIO 1 & 5
							device pnp 2e.8 off end		# GPIO 2
							device pnp 2e.9 on end		# GPIO 3, GPIO 4
							device pnp 2e.a off end		# ACPI
							device pnp 2e.b on		# Hardware monitor
								# Set up interface resources
								io 0x60 = 0x290
								irq 0x70 = 5
							end
						end
					end
					device pci 1.1 on			# SM 0
						chip drivers/generic/generic	# DIMM n-0-0-0
							device i2c 50 on end
						end
						chip drivers/generic/generic	# DIMM n-0-0-1
							device i2c 51 on end
						end
						chip drivers/generic/generic	# DIMM n-0-1-0
							device i2c 52 on end
						end
						chip drivers/generic/generic	# DIMM n-0-1-1
							device i2c 53 on end
						end
						chip drivers/generic/generic	# DIMM n-1-0-0
							device i2c 54 on end
						end
						chip drivers/generic/generic	# DIMM n-1-0-1
							device i2c 55 on end
						end
						chip drivers/generic/generic	# DIMM n-1-1-0
							device i2c 56 on end
						end
						chip drivers/generic/generic	# DIMM n-1-1-1
							device i2c 57 on end
						end
						chip drivers/i2c/w83793
							register "mfc" = "0x29"				# Enable FANIN1/FANIN12, FANIN9/FANIN10, and FANIN8/FANCTRL8 inputs
							register "fanin" = "0x7f"			# Enable monitoring of FANIN6 - FANIN12
							register "fanin_sel" = "0x0f"			# Connect FANIN9 - FANIN12 to pins 37 - 40
							register "peci_agent_conf" = "0x33"		# Set Intel CPU PECI agent domain (not used by AMD but may affect chip operation)
							register "tcase0" = "94"			# Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
							register "tcase1" = "94"			# Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
							register "tcase2" = "94"			# Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
							register "tcase3" = "94"			# Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation)
							register "tr_enable" = "0x03"			# Enable montoring of TR1 and TR2
							register "td_mode_select" = "0x05"		# Use internal temperature sensors and disable unconnected TD3/TD4
							register "td1_critical_temperature" = "85"	# Set TD1 (CPU0) critical temperature to 85°C
							register "td1_critical_hysteresis" = "80"	# Set TD1 (CPU0) critical hysteresis temperature to 80°C
							register "td1_warning_temperature" = "70"	# Set TD1 (CPU0) warning temperature to 70°C
							register "td1_warning_hysteresis" = "65"	# Set TD1 (CPU0) warning hysteresis temperature to 65°C
							register "td2_critical_temperature" = "85"	# Set TD2 (CPU1) critical temperature to 85°C
							register "td2_critical_hysteresis" = "80"	# Set TD2 (CPU1) critical hysteresis temperature to 80°C
							register "td2_warning_temperature" = "70"	# Set TD2 (CPU1) warning temperature to 70°C
							register "td2_warning_hysteresis" = "65"	# Set TD2 (CPU1) warning hysteresis temperature to 65°C
							register "tr1_critical_temperature" = "60"	# Set TR1 (mainboard) critical temperature to 60°C
							register "tr1_critical_hysteresis" = "55"	# Set TR1 (mainboard) critical hysteresis temperature to 55°C
							register "tr1_warning_temperature" = "50"	# Set TR1 (mainboard) warning temperature to 50°C
							register "tr1_warning_hysteresis" = "45"	# Set TR1 (mainboard) warning hysteresis temperature to 45°C
							register "critical_temperature" = "80"		# Set critical temperature to 80°C
							register "fanctrl1" = "0x48"			# Set Fan 4 and Fan 7 to output buffer mode, all others to open drain
							register "fanctrl2" = "0x01"			# Set Fan 4 to Fan 7 to output buffer mode, Fan 1 to DC mode
							register "first_valid_fan_number" = "2"		# Fan 1/Fan 2 controls and sensors are not connected to anything
							register "td1_fan_select" = "0x00"		# All fans to manual mode (no dependence on TD1)
							register "td2_fan_select" = "0x00"		# All fans to manual mode (no dependence on TD2)
							register "td3_fan_select" = "0x00"		# All fans to manual mode (no dependence on TD3)
							register "td4_fan_select" = "0x00"		# All fans to manual mode (no dependence on TD4)
							register "tr1_fan_select" = "0x00"		# All fans to manual mode (no dependence on TR1)
							register "tr2_fan_select" = "0x00"		# All fans to manual mode (no dependence on TR2)
							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
							register "default_speed" = "100"		# All fans to full speed on power up
							register "fan1_duty" = "100"			# Fan 1 to full speed
							register "fan2_duty" = "100"			# Fan 2 to full speed
							register "fan3_duty" = "100"			# Fan 3 to full speed
							register "fan4_duty" = "100"			# Fan 4 to full speed
							register "fan5_duty" = "100"			# Fan 5 to full speed
							register "fan6_duty" = "100"			# Fan 6 to full speed
							register "fan7_duty" = "100"			# Fan 7 to full speed
							register "fan8_duty" = "100"			# Fan 8 to full speed
							register "vcorea_high_limit_mv" = "1500"	# VCOREA (Node 0) high limit to 1.5V
							register "vcorea_low_limit_mv" = "900"		# VCOREA (Node 0) low limit to 0.9V
							register "vcoreb_high_limit_mv" = "1500"	# VCOREB (Node 1) high limit to 1.5V
							register "vcoreb_low_limit_mv" = "900"		# VCOREB (Node 1) low limit to 0.9V
							register "vtt_high_limit_mv" = "1250"		# VTT (HT link voltage) high limit to 1.25V
							register "vtt_low_limit_mv" = "1150"		# VTT (HT link voltage) low limit to 1.15V
							register "vsen1_high_limit_mv" = "1900"		# VSEN1 (Node 0 RAM voltage) high limit to 1.9V
							register "vsen1_low_limit_mv" = "1700"		# VSEN1 (Node 0 RAM voltage) low limit to 1.7V
							register "vsen2_high_limit_mv" = "1900"		# VSEN2 (Node 1 RAM voltage) high limit to 1.9V
							register "vsen2_low_limit_mv" = "1700"		# VSEN2 (Node 1 RAM voltage) low limit to 1.7V
							register "vsen3_high_limit_mv" = "3500"		# VSEN3 (+3.3V) high limit to 3.5V
							register "vsen3_low_limit_mv" = "3100"		# VSEN3 (+3.3V) low limit to 3.1V
							register "vsen4_high_limit_mv" = "1070"		# VSEN4 (+12V, scaling factor ~12.15) high limit to 13V
							register "vsen4_low_limit_mv" = "905"		# VSEN4 (+12V, scaling factor ~12.15) low limit to 11V
							register "vdd_high_limit_mv" = "5200"		# 5VDD high limit to 5.2V
							register "vdd_low_limit_mv" = "4800"		# 5VDD low limit to 4.8V
							register "vsb_high_limit_mv" = "5200"		# 5VSB high limit to 5.2V
							register "vsb_low_limit_mv" = "4800"		# 5VSB low limit to 4.8V
							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
							device i2c 0x2f on end
						end
					end
					device pci 1.1 on end			# SM 1
					device pci 2.0 on end			# USB 1.1
					device pci 2.1 on end			# USB 2
					device pci 4.0 off end			# AC'97 Audio (N/A)
					device pci 4.1 off end			# AC'97 Modem (N/A)
					device pci 6.0 on end			# IDE
					device pci 7.0 on end			# SATA 0
					device pci 8.0 on end			# SATA 1
					device pci 9.0 on			# Bridge
						device pci 4.0 on end		# VGA
					end
					device pci a.0 off end
					device pci b.0 on			# Bridge
						device pci 0.0 on end		# NIC A
					end
					device pci c.0 on			# Bridge
						device pci 0.0 on end		# LSI SAS
					end
					device pci d.0 on			# Bridge
						device pci 0.0 on end		# NIC B
					end
					device pci e.0 on			# Bridge
						# Slot				# PCI E 0
					end
					device pci f.0 off end
					register "ide0_enable" = "1"
					register "ide1_enable" = "1"
					register "sata0_enable" = "1"
					register "sata1_enable" = "1"
				end
			end
			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
			device pci 18.4 on end
			device pci 19.0 on end
			device pci 19.1 on end
			device pci 19.2 on end
			device pci 19.3 on end
			device pci 19.4 on end
		end
	end
end