/* SPDX-License-Identifier: GPL-2.0-only */ /* This file is part of the coreboot project. */ #include #include #include #include #include #include #include #include #include /* Include EC functions */ #include #include "ec.h" static u8 mainboard_smi_ec(void) { u8 cmd = ec_it8518_get_event(); switch (cmd) { case EC_SMI_LID_CLOSED: printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n"); /* Go to S5 */ write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) | (0xf << 10)); break; } return cmd; } void mainboard_smi_gpi(u32 gpi_sts) { if (gpi_sts & (1 << EC_SMI_GPI)) { /* Process all pending events */ while (mainboard_smi_ec() != 0); } } void mainboard_smi_sleep(u8 slp_typ) { /* * Tell the EC to Enable USB power for S3 if requested. * Bit0 of 0x0D/Bit0 of 0x26 * 0/0 All USB port off * 1/0 USB on, all USB port didn't support wake up * 0/1 USB on, yellow port support wake up charge, but may not support * charge smart phone. * 1/1 USB on, yellow port in AUTO mode and didn't support wake up system. */ if (smm_get_gnvs()->s3u0 != 0 || smm_get_gnvs()->s3u1 != 0) { ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) | 0x00); ec_write(EC_USB_S3_EN, ec_read(EC_USB_S3_EN) | 0x01); printk(BIOS_DEBUG, "USB wake from S3 enabled.\n"); } else { /* * If USB charging in suspend is disabled then also disable * the XHCI PME to prevent wake when the port power is cut * after the transition into suspend. */ if (smm_get_gnvs()->xhci) { u32 reg32 = pci_read_config32(PCH_XHCI_DEV, 0x74); reg32 &= ~(1 << 8); /* disable PME */ reg32 |= (1 << 15); /* clear PME status */ pci_write_config32(PCH_XHCI_DEV, 0x74, reg32); } } ec_kbc_write_cmd(EC_KBD_CMD_MUTE); ec_it8518_enable_wake_events(); } #define APMC_ACPI_EN 0xe1 #define APMC_ACPI_DIS 0x1e int mainboard_smi_apmc(u8 apmc) { switch (apmc) { case APM_CNT_FINALIZE: stout_ec_finalize_smm(); break; case APMC_ACPI_EN: /* * TODO(kimarie) Clear all pending events and enable SCI. */ ec_write_cmd(EC_CMD_NOTIFY_ACPI_ENTER); break; case APMC_ACPI_DIS: /* * TODO(kimarie) Clear all pending events and enable SMI. */ ec_write_cmd(EC_CMD_NOTIFY_ACPI_EXIT); break; } return 0; }