chip northbridge/intel/haswell # IGD Displays register "gfx" = "GMA_STATIC_DISPLAYS(0)" # Enable DisplayPort 1 Hotplug with 6ms pulse register "gpu_dp_d_hotplug" = "0x06" # Enable DisplayPort 0 Hotplug with 6ms pulse register "gpu_dp_c_hotplug" = "0x06" # Enable DVI Hotplug with 6ms pulse register "gpu_dp_b_hotplug" = "0x06" device cpu_cluster 0 on chip cpu/intel/haswell device lapic 0 on end # Magic APIC ID to locate this chip device lapic 0xACAC off end end end device domain 0 on device pci 00.0 on end # host bridge device pci 02.0 on end # vga controller chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi1_routing" = "1" register "gpi14_routing" = "2" register "alt_gp_smi_en" = "0x0000" register "gpe0_en_1" = "0x4000" register "sata_port_map" = "0x3f" # SuperIO range is 0x700-0x73f register "gen2_dec" = "0x003c0701" device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT device pci 19.0 off end # Intel Gigabit Ethernet device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio device pci 1c.0 on end # PCIe Port #1 (WLAN) device pci 1c.1 off end # PCIe Port #2 device pci 1c.2 on end # PCIe Port #3 (Debug) device pci 1c.3 on end # PCIe Port #4 (LAN) device pci 1c.4 off end # PCIe Port #5 device pci 1c.5 off end # PCIe Port #6 device pci 1c.6 off end # PCIe Port #7 device pci 1c.7 off end # PCIe Port #8 device pci 1d.0 on end # USB2 EHCI #1 device pci 1e.0 off end # PCI bridge device pci 1f.0 on end # LPC bridge device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on end # SMBus device pci 1f.5 off end # SATA Controller 2 device pci 1f.6 on end # Thermal end end end