/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include static void *smp_write_config_table(void *v) { struct mp_config_table *mc; int bus_isa; /* * By the time this function gets called, the IOAPIC registers * have been written so they can be read to get the correct * APIC ID and Version */ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); /* Initialize the MP_Table */ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); /* * Type 0: Processor Entries: * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, * CPU Signature (Stepping, Model, Family), * Feature Flags */ smp_write_processors(mc); /* * Type 1: Bus Entries: * Bus ID, Bus Type */ mptable_write_buses(mc, NULL, &bus_isa); /* * Type 2: I/O APICs: * APIC ID, Version, APIC Flags:EN, Address */ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); /* * Type 3: I/O Interrupt Table Entries: * Int Type, Int Polarity, Int Level, Source Bus ID, * Source Bus IRQ, Dest APIC ID, Dest PIN# */ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) /* APU Internal Graphic Device */ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); /* SMBUS / ACPI */ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); /* Southbridge HD Audio */ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); /* LPC */ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); /* USB */ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]); /* IDE */ PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]); /* SATA */ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); /* On-board NIC & Slot PCIE. */ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ /* PCI slots */ struct device *dev = pcidev_on_root(0x14, 4); if (dev && dev->enabled) { u8 bus_pci = dev->link_list->secondary; /* PCI_SLOT 0 */ PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ } /* On-board Realtek NIC 2. (PCIe PortA) */ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ /* PCIe PortB */ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ /* PCIe PortC */ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ /* PCIe PortD */ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ #define IO_LOCAL_INT(type, intr, apicid, pin) \ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */ /* Compute the checksums */ return mptable_finalize(mc); } unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */ return (unsigned long)smp_write_config_table(v); }