/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void save_mrc_data(struct pei_data *pei_data) { printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save, pei_data->data_to_save_size); if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0) mrc_cache_stash_data(MRC_TRAINING_DATA, 0, pei_data->data_to_save, pei_data->data_to_save_size); } static const char *const ecc_decoder[] = { "inactive", "active on IO", "disabled on IO", "active", }; /* * Dump in the log memory controller configuration as read from the memory * controller registers. */ static void report_memory_config(void) { int i; const u32 addr_decoder_common = mchbar_read32(MAD_CHNL); printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", (mchbar_read32(MC_BIOS_DATA) * 13333 * 2 + 50) / 100); printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", (addr_decoder_common >> 0) & 3, (addr_decoder_common >> 2) & 3, (addr_decoder_common >> 4) & 3); for (i = 0; i < NUM_CHANNELS; i++) { const u32 ch_conf = mchbar_read32(MAD_DIMM(i)); printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", i, ch_conf); printk(BIOS_DEBUG, " ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]); printk(BIOS_DEBUG, " enhanced interleave mode %s\n", ((ch_conf >> 22) & 1) ? "on" : "off"); printk(BIOS_DEBUG, " rank interleave %s\n", ((ch_conf >> 21) & 1) ? "on" : "off"); printk(BIOS_DEBUG, " DIMMA %d MB width %s %s rank%s\n", ((ch_conf >> 0) & 0xff) * 256, ((ch_conf >> 19) & 1) ? "x16" : "x8 or x32", ((ch_conf >> 17) & 1) ? "dual" : "single", ((ch_conf >> 16) & 1) ? "" : ", selected"); printk(BIOS_DEBUG, " DIMMB %d MB width %s %s rank%s\n", ((ch_conf >> 8) & 0xff) * 256, ((ch_conf >> 20) & 1) ? "x16" : "x8 or x32", ((ch_conf >> 18) & 1) ? "dual" : "single", ((ch_conf >> 16) & 1) ? ", selected" : ""); } } /* * Find PEI executable in coreboot filesystem and execute it. */ static void sdram_initialize(struct pei_data *pei_data) { size_t mrc_size; pei_wrapper_entry_t entry; int ret; broadwell_fill_pei_data(pei_data); /* Assume boot device is memory mapped. */ assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED)); pei_data->saved_data = mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, 0, &mrc_size); if (pei_data->saved_data) { /* MRC cache found */ pei_data->saved_data_size = mrc_size; } else if (pei_data->boot_mode == ACPI_S3) { /* Waking from S3 and no cache. */ printk(BIOS_DEBUG, "No MRC cache found in S3 resume path.\n"); post_code(POST_RESUME_FAILURE); system_reset(); } else { printk(BIOS_DEBUG, "No MRC cache found.\n"); } /* * Do not use saved pei data. Can be set by mainboard romstage * to force a full train of memory on every boot. */ if (pei_data->disable_saved_data) { printk(BIOS_DEBUG, "Disabling PEI saved data by request\n"); pei_data->saved_data = NULL; pei_data->saved_data_size = 0; } /* We don't care about leaking the mapping */ entry = cbfs_ro_map("mrc.bin", NULL); if (entry == NULL) die("mrc.bin not found!"); printk(BIOS_DEBUG, "Starting Memory Reference Code\n"); ret = entry(pei_data); if (ret < 0) die("pei_data version mismatch\n"); /* Print the MRC version after executing the UEFI PEI stage. */ u32 version = mchbar_read32(MRC_REVISION); printk(BIOS_DEBUG, "MRC Version %u.%u.%u Build %u\n", (version >> 24) & 0xff, (version >> 16) & 0xff, (version >> 8) & 0xff, (version >> 0) & 0xff); report_memory_config(); } static void setup_sdram_meminfo(struct pei_data *pei_data) { struct memory_info *mem_info; printk(BIOS_DEBUG, "create cbmem for dimm information\n"); mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info)); if (!mem_info) { printk(BIOS_ERR, "Error! Failed to add mem_info to cbmem\n"); return; } memset(mem_info, 0, sizeof(*mem_info)); /* Translate pei_memory_info struct data into memory_info struct */ mem_info->dimm_cnt = pei_data->meminfo.dimm_cnt; for (int i = 0; i < MIN(DIMM_INFO_TOTAL, PEI_DIMM_INFO_TOTAL); i++) { struct dimm_info *dimm = &mem_info->dimm[i]; const struct pei_dimm_info *pei_dimm = &pei_data->meminfo.dimm[i]; dimm->dimm_size = pei_dimm->dimm_size; dimm->ddr_type = pei_dimm->ddr_type; dimm->ddr_frequency = pei_dimm->ddr_frequency; dimm->rank_per_dimm = pei_dimm->rank_per_dimm; dimm->channel_num = pei_dimm->channel_num; dimm->dimm_num = pei_dimm->dimm_num; dimm->bank_locator = pei_dimm->bank_locator; memcpy(&dimm->serial, &pei_dimm->serial, MIN(sizeof(dimm->serial), sizeof(pei_dimm->serial))); memcpy(&dimm->module_part_number, &pei_dimm->module_part_number, MIN(sizeof(dimm->module_part_number), sizeof(pei_dimm->module_part_number))); dimm->module_part_number[DIMM_INFO_PART_NUMBER_SIZE - 1] = '\0'; dimm->mod_id = pei_dimm->mod_id; dimm->mod_type = pei_dimm->mod_type; dimm->bus_width = pei_dimm->bus_width; } } /* * 0 = leave channel enabled * 1 = disable dimm 0 on channel * 2 = disable dimm 1 on channel * 3 = disable dimm 0+1 on channel */ static int make_channel_disabled_mask(const struct spd_info *spdi, int ch) { return (!spdi->addresses[ch + ch] << 0) | (!spdi->addresses[ch + ch + 1] << 1); } void perform_raminit(const struct chipset_power_state *const power_state) { const int s3resume = power_state->prev_sleep_state == ACPI_S3; struct pei_data pei_data = { 0 }; mainboard_fill_pei_data(&pei_data); if (CONFIG(BROADWELL_LPDDR3)) { const struct lpddr3_dq_dqs_map *lpddr3_map = mb_get_lpddr3_dq_dqs_map(); assert(lpddr3_map); memcpy(pei_data.dq_map, lpddr3_map->dq, sizeof(pei_data.dq_map)); memcpy(pei_data.dqs_map, lpddr3_map->dqs, sizeof(pei_data.dqs_map)); } /* Obtain the SPD addresses from mainboard code */ struct spd_info spdi = { 0 }; mb_get_spd_map(&spdi); if (CONFIG(HAVE_SPD_IN_CBFS)) copy_spd(&pei_data, &spdi); /* Calculate unimplemented DIMM slots for each channel */ pei_data.dimm_channel0_disabled = make_channel_disabled_mask(&spdi, 0); pei_data.dimm_channel1_disabled = make_channel_disabled_mask(&spdi, 1); /* MRC expects left-aligned SMBus addresses, and 0 for memory-down */ for (size_t i = 0; i < ARRAY_SIZE(spdi.addresses); i++) { const uint8_t addr = spdi.addresses[i]; pei_data.spd_addresses[i] = addr == SPD_MEMORY_DOWN ? 0 : addr << 1; } post_code(0x32); timestamp_add_now(TS_INITRAM_START); pei_data.boot_mode = power_state->prev_sleep_state; /* Initialize RAM */ sdram_initialize(&pei_data); timestamp_add_now(TS_INITRAM_END); int cbmem_was_initted = !cbmem_recovery(s3resume); if (s3resume && !cbmem_was_initted) { /* Failed S3 resume, reset to come up cleanly */ printk(BIOS_CRIT, "Failed to recover CBMEM in S3 resume.\n"); system_reset(); } save_mrc_data(&pei_data); setup_sdram_meminfo(&pei_data); }