/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include static inline uint64_t sgx_resource(uint32_t low, uint32_t high) { uint64_t val; val = (uint64_t)(high & SGX_RESOURCE_MASK_HI) << 32; val |= low & SGX_RESOURCE_MASK_LO; return val; } static int is_sgx_supported(void) { struct cpuid_result cpuid_regs; msr_t msr; cpuid_regs = cpuid_ext(0x7, 0x0); /* EBX[2] is feature capability */ msr = rdmsr(MTRR_CAP_MSR); /* Bit 12 is PRMRR enablement */ return ((cpuid_regs.ebx & SGX_SUPPORTED) && (msr.lo & PRMRR_SUPPORTED)); } void prmrr_core_configure(void) { union { uint64_t data64; struct { uint32_t lo; uint32_t hi; } data32; } prmrr_base, prmrr_mask; msr_t msr; /* * Software Developer's Manual Volume 4: * Order Number: 335592-068US * Chapter 2.16.1 * MSR_PRMRR_PHYS_MASK is in scope "Core" * MSR_PRMRR_PHYS_BASE is in scope "Core" * Return if Hyper-Threading is enabled and not thread 0 */ if (!is_sgx_supported() || intel_ht_sibling()) return; /* PRMRR_PHYS_MASK is in scope "Core" */ msr = rdmsr(MSR_PRMRR_PHYS_MASK); /* If it is locked don't attempt to write PRMRR MSRs. */ if (msr.lo & PRMRR_PHYS_MASK_LOCK) return; /* PRMRR base and mask are read from the UNCORE PRMRR MSRs * that are already set in FSP-M. */ if (soc_get_uncore_prmmr_base_and_mask(&prmrr_base.data64, &prmrr_mask.data64) < 0) { printk(BIOS_ERR, "SGX: Failed to get PRMRR base and mask\n"); return; } if (!prmrr_base.data32.lo) { printk(BIOS_ERR, "SGX Error: Uncore PRMRR is not set!\n"); return; } printk(BIOS_INFO, "SGX: prmrr_base = 0x%llx\n", prmrr_base.data64); printk(BIOS_INFO, "SGX: prmrr_mask = 0x%llx\n", prmrr_mask.data64); /* Program core PRMRR MSRs. * - Set cache writeback mem attrib in PRMRR base MSR * - Clear the valid bit in PRMRR mask MSR * - Lock PRMRR MASK MSR */ prmrr_base.data32.lo |= MTRR_TYPE_WRBACK; wrmsr(MSR_PRMRR_PHYS_BASE, (msr_t) {.lo = prmrr_base.data32.lo, .hi = prmrr_base.data32.hi}); prmrr_mask.data32.lo &= ~PRMRR_PHYS_MASK_VALID; prmrr_mask.data32.lo |= PRMRR_PHYS_MASK_LOCK; wrmsr(MSR_PRMRR_PHYS_MASK, (msr_t) {.lo = prmrr_mask.data32.lo, .hi = prmrr_mask.data32.hi}); } static int is_prmrr_set(void) { msr_t prmrr_base, prmrr_mask; prmrr_base = rdmsr(MSR_PRMRR_PHYS_BASE); prmrr_mask = rdmsr(MSR_PRMRR_PHYS_MASK); /* If PRMRR base is zero and PRMRR mask is locked * then PRMRR is not set */ if ((prmrr_base.hi == 0) && (prmrr_base.lo == 0) && (prmrr_mask.lo & PRMRR_PHYS_MASK_LOCK)) return 0; return 1; } static void enable_sgx(void) { msr_t msr; /* * Intel 64 and IA-32 ArchitecturesSoftware Developer's ManualVolume 3C * Order Number: 326019-060US * Chapter 35.10.2 "Additional MSRs Supported by Intel" * IA32_FEATURE_CONTROL is in scope "Thread" */ msr = rdmsr(IA32_FEATURE_CONTROL); /* Only enable it when it is not locked */ if ((msr.lo & FEATURE_CONTROL_LOCK_BIT) == 0) { msr.lo |= SGX_GLOBAL_ENABLE; /* Enable it */ wrmsr(IA32_FEATURE_CONTROL, msr); } } static void lock_sgx(void) { msr_t msr; /* * Intel 64 and IA-32 ArchitecturesSoftware Developer's ManualVolume 3C * Order Number: 326019-060US * Chapter 35.10.2 "Additional MSRs Supported by Intel" * IA32_FEATURE_CONTROL is in scope "Thread" */ msr = rdmsr(IA32_FEATURE_CONTROL); /* If it is locked don't attempt to lock it again. */ if ((msr.lo & 1) == 0) { msr.lo |= 1; /* Lock it */ wrmsr(IA32_FEATURE_CONTROL, msr); } } static int owner_epoch_update(void) { /* TODO - the Owner Epoch update mechanism is not determined yet, * for PoC just write '0's to the MSRs. */ msr_t msr = {0, 0}; /* SGX_OWNEREPOCH is in scope "Package" */ wrmsr(MSR_SGX_OWNEREPOCH0, msr); wrmsr(MSR_SGX_OWNEREPOCH1, msr); return 0; } static void activate_sgx(void) { msr_t msr; /* Activate SGX feature by writing 1b to MSR 0x7A on all threads. * BIOS must ensure bit 0 is set prior to writing to it, then read it * back and verify the bit is cleared to confirm SGX activation. */ msr = rdmsr(MSR_BIOS_UPGD_TRIG); if (msr.lo & SGX_ACTIVATE_BIT) { wrmsr(MSR_BIOS_UPGD_TRIG, (msr_t) {.lo = SGX_ACTIVATE_BIT, .hi = 0}); /* Read back to verify it is activated */ msr = rdmsr(MSR_BIOS_UPGD_TRIG); if (msr.lo & SGX_ACTIVATE_BIT) printk(BIOS_ERR, "SGX activation failed.\n"); else printk(BIOS_INFO, "SGX activation was successful.\n"); } else { printk(BIOS_ERR, "SGX feature is deactivated.\n"); } } static int is_prmrr_approved(void) { msr_t msr; msr = rdmsr(MSR_PRMRR_PHYS_MASK); if (msr.lo & PRMRR_PHYS_MASK_VALID) { printk(BIOS_INFO, "SGX: MCHECK approved SGX PRMRR\n"); return 1; } printk(BIOS_INFO, "SGX: MCHECK did not approve SGX PRMRR\n"); return 0; } /* * Configures SGX according to "Intel Software Guard Extensions Technology" * Document Number: 565432 */ void sgx_configure(void *unused) { if (!is_sgx_supported() || !is_prmrr_set()) { printk(BIOS_ERR, "SGX: not supported or pre-conditions not met\n"); return; } /* Enable the SGX feature on all threads. */ enable_sgx(); /* Update the owner epoch value */ if (owner_epoch_update() < 0) return; if (CONFIG(SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY)) /* Ensure to lock memory before reload microcode patch */ cpu_lt_lock_memory(NULL); /* * Update just on the first CPU in the core. Other siblings * get the update automatically according to Document: 253668-060US * Intel SDM Chapter 9.11.6.3 * "Update in a System Supporting Intel Hyper-Threading Technology" * Intel Hyper-Threading Technology has implications on the loading of the * microcode update. The update must be loaded for each core in a physical * processor. Thus, for a processor supporting Intel Hyper-Threading * Technology, only one logical processor per core is required to load the * microcode update. Each individual logical processor can independently * load the update. However, MP initialization must provide some mechanism * (e.g. a software semaphore) to force serialization of microcode update * loads and to prevent simultaneous load attempts to the same core. */ if (!intel_ht_sibling()) { const void *microcode_patch = intel_mp_current_microcode(); intel_microcode_load_unlocked(microcode_patch); } /* Lock the SGX feature on all threads. */ lock_sgx(); /* Activate the SGX feature, if PRMRR config was approved by MCHECK */ if (is_prmrr_approved()) activate_sgx(); } void sgx_fill_gnvs(global_nvs_t *gnvs) { struct cpuid_result cpuid_regs; if (!is_sgx_supported()) { printk(BIOS_DEBUG, "SGX: not supported. skip gnvs fill\n"); return; } /* Get EPC base and size. * Intel SDM: Table 36-6. CPUID Leaf 12H, Sub-Leaf Index 2 or * Higher for enumeration of SGX Resources. Same Table mentions * about return values of the CPUID */ cpuid_regs = cpuid_ext(SGX_RESOURCE_ENUM_CPUID_LEAF, SGX_RESOURCE_ENUM_CPUID_SUBLEAF); if (cpuid_regs.eax & SGX_RESOURCE_ENUM_BIT) { /* EPC section enumerated */ gnvs->ecps = 1; gnvs->emna = sgx_resource(cpuid_regs.eax, cpuid_regs.ebx); gnvs->elng = sgx_resource(cpuid_regs.ecx, cpuid_regs.edx); } printk(BIOS_DEBUG, "SGX: gnvs ECP status = %d base = 0x%llx len = 0x%llx\n", gnvs->ecps, gnvs->emna, gnvs->elng); }