/* SPDX-License-Identifier: GPL-2.0-only */


#ifndef _SOC_USB_H_
#define _SOC_USB_H_

#include <stdint.h>

/* Per Port HS Transmitter Emphasis */
#define USB2_EMP_OFF			0
#define USB2_DE_EMP_ON			1
#define USB2_PRE_EMP_ON			2
#define USB2_DE_EMP_ON_PRE_EMP_ON	3

/* Per Port Half Bit Pre-emphasis */
#define USB2_FULL_BIT_PRE_EMP	0
#define USB2_HALF_BIT_PRE_EMP	1

/* Per Port HS Preemphasis Bias */
#define USB2_BIAS_0MV		0
#define USB2_BIAS_11P25MV	1
#define USB2_BIAS_16P9MV	2
#define USB2_BIAS_28P15MV	3
#define USB2_BIAS_39P35MV	5
#define USB2_BIAS_45MV		6
#define USB2_BIAS_56P3MV	7

struct usb2_port_config {
	uint8_t enable;
	uint8_t ocpin;
	uint8_t tx_bias;
	uint8_t tx_emp_enable;
	uint8_t pre_emp_bias;
	uint8_t pre_emp_bit;
};

/* USB Overcurrent pins definition */
enum {
	OC0 = 0,
	OC1,
	OC2,
	OC3,
	OC4,
	OC5,
	OC6,
	OC7,
	OCMAX,
	OC_SKIP = 0xff, /* Skip OC programming */
};

/* Standard USB Port based on length:
 * - External
 * - Back Panel
 * - OTG
 * - M.2
 * - Internal device down */

#define USB2_PORT_EMPTY { \
	.enable        = 0, \
	.ocpin         = OC_SKIP, \
	.tx_bias       = USB2_BIAS_0MV, \
	.tx_emp_enable = USB2_EMP_OFF, \
	.pre_emp_bias  = USB2_BIAS_0MV, \
	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
}

/* Length = 11.5"-12" */
#define USB2_PORT_LONG(pin) { \
	.enable        = 1, \
	.ocpin         = (pin), \
	.tx_bias       = USB2_BIAS_39P35MV, \
	.tx_emp_enable = USB2_PRE_EMP_ON, \
	.pre_emp_bias  = USB2_BIAS_56P3MV, \
	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
}

/* Length  = 6"-11.49" */
#define USB2_PORT_MID(pin) { \
	.enable        = 1, \
	.ocpin         = (pin), \
	.tx_bias       = USB2_BIAS_0MV, \
	.tx_emp_enable = USB2_PRE_EMP_ON, \
	.pre_emp_bias  = USB2_BIAS_56P3MV, \
	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
}

/* Length = 3"-5.99" */
#define USB2_PORT_SHORT(pin) { \
	.enable        = 1, \
	.ocpin         = (pin), \
	.tx_bias       = USB2_BIAS_39P35MV, \
	.tx_emp_enable = USB2_PRE_EMP_ON | USB2_DE_EMP_ON, \
	.pre_emp_bias  = USB2_BIAS_39P35MV, \
	.pre_emp_bit   = USB2_FULL_BIT_PRE_EMP, \
}

/* Max TX and Pre-emp settings */
#define USB2_PORT_MAX(pin) { \
	.enable        = 1, \
	.ocpin         = (pin), \
	.tx_bias       = USB2_BIAS_56P3MV, \
	.tx_emp_enable = USB2_PRE_EMP_ON, \
	.pre_emp_bias  = USB2_BIAS_56P3MV, \
	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
}

/* Type-C Port, no BC1.2 charge detect module / MUX
 * Length  = 3.0" - 9.00" */
#define USB2_PORT_TYPE_C(pin) { \
	.enable        = 1, \
	.ocpin         = (pin), \
	.tx_bias       = USB2_BIAS_0MV, \
	.tx_emp_enable = USB2_PRE_EMP_ON, \
	.pre_emp_bias  = USB2_BIAS_56P3MV, \
	.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP, \
}

struct usb3_port_config {
	uint8_t enable;
	uint8_t ocpin;
	uint8_t tx_de_emp;
	uint8_t tx_downscale_amp;
};

#define USB3_PORT_EMPTY { \
	.enable           = 0, \
	.ocpin            = OC_SKIP, \
	.tx_de_emp        = 0x00, \
	.tx_downscale_amp = 0x00, \
}

#define USB3_PORT_DEFAULT(pin) { \
	.enable           = 1, \
	.ocpin            = (pin), \
	.tx_de_emp        = 0x0, \
	.tx_downscale_amp = 0x00, \
}

#endif