/* SPDX-License-Identifier: GPL-2.0-only */ /* * This file is created based on Intel Tiger Lake Processor PCH Datasheet * Document number: 575857 * Chapter number: 4 */ #include #include #include #include #include #include #include #include #include #include /* * Set which power state system will be after reapplying * the power (from G3 State) */ void pmc_soc_set_afterg3_en(const bool on) { uint8_t reg8; uint8_t *const pmcbase = pmc_mmio_regs(); reg8 = read8(pmcbase + GEN_PMCON_A); if (on) reg8 &= ~SLEEP_AFTER_POWER_FAIL; else reg8 |= SLEEP_AFTER_POWER_FAIL; write8(pmcbase + GEN_PMCON_A, reg8); } static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) { uint32_t reg; uint8_t *pmcbase = pmc_mmio_regs(); printk(BIOS_DEBUG, "%sabling Deep S%c\n", enable ? "En" : "Dis", sx + '0'); reg = read32(pmcbase + offset); if (enable) reg |= mask; else reg &= ~mask; write32(pmcbase + offset, reg); } static void config_deep_s5(int on_ac, int on_dc) { /* Treat S4 the same as S5. */ config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac); config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc); config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac); config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc); } static void config_deep_s3(int on_ac, int on_dc) { config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac); config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc); } static void config_deep_sx(uint32_t deepsx_config) { uint32_t reg; uint8_t *pmcbase = pmc_mmio_regs(); reg = read32(pmcbase + DSX_CFG); reg &= ~DSX_CFG_MASK; reg |= deepsx_config; write32(pmcbase + DSX_CFG, reg); } static void pmc_init(void *unused) { const config_t *config = config_of_soc(); rtc_init(); pmc_set_power_failure_state(true); pmc_gpe_init(); pmc_set_acpi_mode(); config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc); config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc); config_deep_sx(config->deep_sx_config); } /* * Initialize PMC controller. * * PMC controller gets hidden from PCI bus during FSP-Silicon init call. * Hence PCI enumeration can't be used to initialize bus device and * allocate resources. */ BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pmc_init, NULL);