/* * This file is part of the coreboot project. * * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA */ /* * This is a ramstage driver for the Intel Management Engine found in the * 6-series chipset. It handles the required boot-time messages over the * MMIO-based Management Engine Interface to tell the ME that the BIOS is * finished with POST. Additional messages are defined for debug but are * not used unless the console loglevel is high enough. */ #include #include #include #include #include #include #include #include #include #ifdef __SMM__ #include #else # include # include #endif #include "me.h" #include "pch.h" #if CONFIG_CHROMEOS #include #include #endif #ifndef __SMM__ /* Path that the BIOS should take based on ME state */ static const char *me_bios_path_values[] = { [ME_NORMAL_BIOS_PATH] = "Normal", [ME_S3WAKE_BIOS_PATH] = "S3 Wake", [ME_ERROR_BIOS_PATH] = "Error", [ME_RECOVERY_BIOS_PATH] = "Recovery", [ME_DISABLE_BIOS_PATH] = "Disable", [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", }; static int intel_me_read_mbp(me_bios_payload *mbp_data); #endif /* MMIO base address for MEI interface */ static u32 mei_base_address; #if CONFIG_DEBUG_INTEL_ME static void mei_dump(void *ptr, int dword, int offset, const char *type) { struct mei_csr *csr; printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); switch (offset) { case MEI_H_CSR: case MEI_ME_CSR_HA: csr = ptr; if (!csr) { printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); break; } printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, csr->buffer_read_ptr, csr->buffer_write_ptr, csr->ready, csr->reset, csr->interrupt_generate, csr->interrupt_status, csr->interrupt_enable); break; case MEI_ME_CB_RW: case MEI_H_CB_WW: printk(BIOS_SPEW, "CB: 0x%08x\n", dword); break; default: printk(BIOS_SPEW, "0x%08x\n", offset); break; } } #else # define mei_dump(ptr,dword,offset,type) do {} while (0) #endif /* * ME/MEI access helpers using memcpy to avoid aliasing. */ static inline void mei_read_dword_ptr(void *ptr, int offset) { u32 dword = read32(mei_base_address + offset); memcpy(ptr, &dword, sizeof(dword)); mei_dump(ptr, dword, offset, "READ"); } static inline void mei_write_dword_ptr(void *ptr, int offset) { u32 dword = 0; memcpy(&dword, ptr, sizeof(dword)); write32(mei_base_address + offset, dword); mei_dump(ptr, dword, offset, "WRITE"); } #ifndef __SMM__ static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) { u32 dword = pci_read_config32(dev, offset); memcpy(ptr, &dword, sizeof(dword)); mei_dump(ptr, dword, offset, "PCI READ"); } #endif static inline void read_host_csr(struct mei_csr *csr) { mei_read_dword_ptr(csr, MEI_H_CSR); } static inline void write_host_csr(struct mei_csr *csr) { mei_write_dword_ptr(csr, MEI_H_CSR); } static inline void read_me_csr(struct mei_csr *csr) { mei_read_dword_ptr(csr, MEI_ME_CSR_HA); } static inline void write_cb(u32 dword) { write32(mei_base_address + MEI_H_CB_WW, dword); mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); } static inline u32 read_cb(void) { u32 dword = read32(mei_base_address + MEI_ME_CB_RW); mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); return dword; } /* Wait for ME ready bit to be asserted */ static int mei_wait_for_me_ready(void) { struct mei_csr me; unsigned try = ME_RETRY; while (try--) { read_me_csr(&me); if (me.ready) return 0; udelay(ME_DELAY); } printk(BIOS_ERR, "ME: failed to become ready\n"); return -1; } static void mei_reset(void) { struct mei_csr host; if (mei_wait_for_me_ready() < 0) return; /* Reset host and ME circular buffers for next message */ read_host_csr(&host); host.reset = 1; host.interrupt_generate = 1; write_host_csr(&host); if (mei_wait_for_me_ready() < 0) return; /* Re-init and indicate host is ready */ read_host_csr(&host); host.interrupt_generate = 1; host.ready = 1; host.reset = 0; write_host_csr(&host); } static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, void *req_data) { struct mei_csr host; unsigned ndata, n; u32 *data; /* Number of dwords to write, ignoring MKHI */ ndata = mei->length >> 2; /* Pad non-dword aligned request message length */ if (mei->length & 3) ndata++; if (!ndata) { printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); return -1; } ndata++; /* Add MEI header */ /* * Make sure there is still room left in the circular buffer. * Reset the buffer pointers if the requested message will not fit. */ read_host_csr(&host); if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); mei_reset(); read_host_csr(&host); } /* * This implementation does not handle splitting large messages * across multiple transactions. Ensure the requested length * will fit in the available circular buffer depth. */ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", ndata + 2, host.buffer_depth); return -1; } /* Write MEI header */ mei_write_dword_ptr(mei, MEI_H_CB_WW); ndata--; /* Write MKHI header */ mei_write_dword_ptr(mkhi, MEI_H_CB_WW); ndata--; /* Write message data */ data = req_data; for (n = 0; n < ndata; ++n) write_cb(*data++); /* Generate interrupt to the ME */ read_host_csr(&host); host.interrupt_generate = 1; write_host_csr(&host); /* Make sure ME is ready after sending request data */ return mei_wait_for_me_ready(); } static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes) { struct mei_header mei_rsp; struct mkhi_header mkhi_rsp; struct mei_csr me, host; unsigned ndata, n/*, me_data_len*/; unsigned expected; u32 *data; /* Total number of dwords to read from circular buffer */ expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; if (rsp_bytes & 3) expected++; /* * The interrupt status bit does not appear to indicate that the * message has actually been received. Instead we wait until the * expected number of dwords are present in the circular buffer. */ for (n = ME_RETRY; n; --n) { read_me_csr(&me); if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) break; udelay(ME_DELAY); } if (!n) { printk(BIOS_ERR, "ME: timeout waiting for data: expected " "%u, available %u\n", expected, me.buffer_write_ptr - me.buffer_read_ptr); return -1; } /* Read and verify MEI response header from the ME */ mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); if (!mei_rsp.is_complete) { printk(BIOS_ERR, "ME: response is not complete\n"); return -1; } /* Handle non-dword responses and expect at least MKHI header */ ndata = mei_rsp.length >> 2; if (mei_rsp.length & 3) ndata++; if (ndata != (expected - 1)) { printk(BIOS_ERR, "ME: response is missing data %d != %d\n", ndata, (expected - 1)); return -1; } /* Read and verify MKHI response header from the ME */ mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); if (!mkhi_rsp.is_response || mkhi->group_id != mkhi_rsp.group_id || mkhi->command != mkhi_rsp.command) { printk(BIOS_ERR, "ME: invalid response, group %u ?= %u," "command %u ?= %u, is_response %u\n", mkhi->group_id, mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, mkhi_rsp.is_response); return -1; } ndata--; /* MKHI header has been read */ /* Make sure caller passed a buffer with enough space */ if (ndata != (rsp_bytes >> 2)) { printk(BIOS_ERR, "ME: not enough room in response buffer: " "%u != %u\n", ndata, rsp_bytes >> 2); return -1; } /* Read response data from the circular buffer */ data = rsp_data; for (n = 0; n < ndata; ++n) *data++ = read_cb(); /* Tell the ME that we have consumed the response */ read_host_csr(&host); host.interrupt_status = 1; host.interrupt_generate = 1; write_host_csr(&host); return mei_wait_for_me_ready(); } static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, void *req_data, void *rsp_data, int rsp_bytes) { if (mei_send_msg(mei, mkhi, req_data) < 0) return -1; if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) return -1; return 0; } #if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__) static inline void print_cap(const char *name, int state) { printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", name, state ? " en" : "dis"); } static void me_print_fw_version(mbp_fw_version_name *vers_name) { if (!vers_name->major_version) { printk(BIOS_ERR, "ME: mbp missing version report\n"); return; } printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n", vers_name->major_version, vers_name->minor_version, vers_name->hotfix_version, vers_name->build_version); } /* Get ME Firmware Capabilities */ static int mkhi_get_fwcaps(mefwcaps_sku *cap) { u32 rule_id = 0; struct me_fwcaps cap_msg; struct mkhi_header mkhi = { .group_id = MKHI_GROUP_ID_FWCAPS, .command = MKHI_FWCAPS_GET_RULE, }; struct mei_header mei = { .is_complete = 1, .host_address = MEI_HOST_ADDRESS, .client_address = MEI_ADDRESS_MKHI, .length = sizeof(mkhi) + sizeof(rule_id), }; /* Send request and wait for response */ if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap_msg, sizeof(cap_msg)) < 0) { printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); return -1; } *cap = cap_msg.caps_sku; return 0; } /* Get ME Firmware Capabilities */ static void me_print_fwcaps(mbp_fw_caps *caps_section) { mefwcaps_sku *cap = &caps_section->fw_capabilities; if (!caps_section->available) { printk(BIOS_ERR, "ME: mbp missing fwcaps report\n"); if (mkhi_get_fwcaps(cap)) return; } print_cap("Full Network manageability", cap->full_net); print_cap("Regular Network manageability", cap->std_net); print_cap("Manageability", cap->manageability); print_cap("Small business technology", cap->small_business); print_cap("Level III manageability", cap->l3manageability); print_cap("IntelR Anti-Theft (AT)", cap->intel_at); print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls); print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc); print_cap("ICC Over Clocking", cap->icc_over_clocking); print_cap("Protected Audio Video Path (PAVP)", cap->pavp); print_cap("IPV6", cap->ipv6); print_cap("KVM Remote Control (KVM)", cap->kvm); print_cap("Outbreak Containment Heuristic (OCH)", cap->och); print_cap("Virtual LAN (VLAN)", cap->vlan); print_cap("TLS", cap->tls); print_cap("Wireless LAN (WLAN)", cap->wlan); } #endif #if CONFIG_CHROMEOS && 0 /* DISABLED */ /* Tell ME to issue a global reset */ static int mkhi_global_reset(void) { struct me_global_reset reset = { .request_origin = GLOBAL_RESET_BIOS_POST, .reset_type = CBM_RR_GLOBAL_RESET, }; struct mkhi_header mkhi = { .group_id = MKHI_GROUP_ID_CBM, .command = MKHI_GLOBAL_RESET, }; struct mei_header mei = { .is_complete = 1, .length = sizeof(mkhi) + sizeof(reset), .host_address = MEI_HOST_ADDRESS, .client_address = MEI_ADDRESS_MKHI, }; /* Send request and wait for response */ printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) { /* No response means reset will happen shortly... */ hlt(); } /* If the ME responded it rejected the reset request */ printk(BIOS_ERR, "ME: Global Reset failed\n"); return -1; } #endif #ifdef __SMM__ /* Send END OF POST message to the ME */ static int mkhi_end_of_post(void) { struct mkhi_header mkhi = { .group_id = MKHI_GROUP_ID_GEN, .command = MKHI_END_OF_POST, }; struct mei_header mei = { .is_complete = 1, .host_address = MEI_HOST_ADDRESS, .client_address = MEI_ADDRESS_MKHI, .length = sizeof(mkhi), }; u32 eop_ack; /* Send request and wait for response */ printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { printk(BIOS_ERR, "ME: END OF POST message failed\n"); return -1; } printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); return 0; } void intel_me8_finalize_smm(void) { struct me_hfs hfs; u32 reg32; mei_base_address = pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf; /* S3 path will have hidden this device already */ if (!mei_base_address || mei_base_address == 0xfffffff0) return; /* Make sure ME is in a mode that expects EOP */ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS); memcpy(&hfs, ®32, sizeof(u32)); /* Abort and leave device alone if not normal mode */ if (hfs.fpt_bad || hfs.working_state != ME_HFS_CWS_NORMAL || hfs.operation_mode != ME_HFS_MODE_NORMAL) return; /* Try to send EOP command so ME stops accepting other commands */ mkhi_end_of_post(); /* Make sure IO is disabled */ reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND); reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO); pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32); /* Hide the PCI device */ RCBA32_OR(FD2, PCH_DISABLE_MEI1); } #else /* !__SMM__ */ /* Determine the path that we should take based on ME status */ static me_bios_path intel_me_path(device_t dev) { me_bios_path path = ME_DISABLE_BIOS_PATH; struct me_hfs hfs; struct me_gmes gmes; #if CONFIG_HAVE_ACPI_RESUME /* S3 wake skips all MKHI messages */ if (acpi_slp_type == 3) { return ME_S3WAKE_BIOS_PATH; } #endif pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES); /* Check and dump status */ intel_me_status(&hfs, &gmes); /* Check Current Working State */ switch (hfs.working_state) { case ME_HFS_CWS_NORMAL: path = ME_NORMAL_BIOS_PATH; break; case ME_HFS_CWS_REC: path = ME_RECOVERY_BIOS_PATH; break; default: path = ME_DISABLE_BIOS_PATH; break; } /* Check Current Operation Mode */ switch (hfs.operation_mode) { case ME_HFS_MODE_NORMAL: break; case ME_HFS_MODE_DEBUG: case ME_HFS_MODE_DIS: case ME_HFS_MODE_OVER_JMPR: case ME_HFS_MODE_OVER_MEI: default: path = ME_DISABLE_BIOS_PATH; break; } /* Check for any error code and valid firmware and MBP */ if (hfs.error_code || hfs.fpt_bad) path = ME_ERROR_BIOS_PATH; /* Check if the MBP is ready */ if (!gmes.mbp_rdy) { printk(BIOS_CRIT, "%s: mbp is not ready!\n", __FUNCTION__); path = ME_ERROR_BIOS_PATH; } #if CONFIG_ELOG if (path != ME_NORMAL_BIOS_PATH) { struct elog_event_data_me_extended data = { .current_working_state = hfs.working_state, .operation_state = hfs.operation_state, .operation_mode = hfs.operation_mode, .error_code = hfs.error_code, .progress_code = gmes.progress_code, .current_pmevent = gmes.current_pmevent, .current_state = gmes.current_state, }; elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, &data, sizeof(data)); } #endif return path; } /* Prepare ME for MEI messages */ static int intel_mei_setup(device_t dev) { struct resource *res; struct mei_csr host; u32 reg32; /* Find the MMIO base for the ME interface */ res = find_resource(dev, PCI_BASE_ADDRESS_0); if (!res || res->base == 0 || res->size == 0) { printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); return -1; } mei_base_address = res->base; /* Ensure Memory and Bus Master bits are set */ reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_write_config32(dev, PCI_COMMAND, reg32); /* Clean up status for next message */ read_host_csr(&host); host.interrupt_generate = 1; host.ready = 1; host.reset = 0; write_host_csr(&host); return 0; } /* Read the Extend register hash of ME firmware */ static int intel_me_extend_valid(device_t dev) { struct me_heres status; u32 extend[8] = {0}; int i, count = 0; pci_read_dword_ptr(dev, &status, PCI_ME_HERES); if (!status.extend_feature_present) { printk(BIOS_ERR, "ME: Extend Feature not present\n"); return -1; } if (!status.extend_reg_valid) { printk(BIOS_ERR, "ME: Extend Register not valid\n"); return -1; } switch (status.extend_reg_algorithm) { case PCI_ME_EXT_SHA1: count = 5; printk(BIOS_DEBUG, "ME: Extend SHA-1: "); break; case PCI_ME_EXT_SHA256: count = 8; printk(BIOS_DEBUG, "ME: Extend SHA-256: "); break; default: printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", status.extend_reg_algorithm); return -1; } for (i = 0; i < count; ++i) { extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); printk(BIOS_DEBUG, "%08x", extend[i]); } printk(BIOS_DEBUG, "\n"); #if CONFIG_CHROMEOS /* Save hash in NVS for the OS to verify */ chromeos_set_me_hash(extend, count); #endif return 0; } /* Hide the ME virtual PCI devices */ static void intel_me_hide(device_t dev) { dev->enabled = 0; pch_enable(dev); } /* Check whether ME is present and do basic init */ static void intel_me_init(device_t dev) { me_bios_path path = intel_me_path(dev); me_bios_payload mbp_data; /* Do initial setup and determine the BIOS path */ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); switch (path) { case ME_S3WAKE_BIOS_PATH: intel_me_hide(dev); break; case ME_NORMAL_BIOS_PATH: /* Validate the extend register */ if (intel_me_extend_valid(dev) < 0) break; /* TODO: force recovery mode */ /* Prepare MEI MMIO interface */ if (intel_mei_setup(dev) < 0) break; if(intel_me_read_mbp(&mbp_data)) break; #if CONFIG_CHROMEOS && 0 /* DISABLED */ /* * Unlock ME in recovery mode. */ if (recovery_mode_enabled()) { /* Unlock ME flash region */ mkhi_hmrfpo_enable(); /* Issue global reset */ mkhi_global_reset(); return; } #endif #if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) me_print_fw_version(&mbp_data.fw_version_name); me_print_fwcaps(&mbp_data.fw_caps_sku); #endif /* * Leave the ME unlocked in this path. * It will be locked via SMI command later. */ break; case ME_ERROR_BIOS_PATH: case ME_RECOVERY_BIOS_PATH: case ME_DISABLE_BIOS_PATH: case ME_FIRMWARE_UPDATE_BIOS_PATH: break; } } static void set_subsystem(device_t dev, unsigned vendor, unsigned device) { if (!vendor || !device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_read_config32(dev, PCI_VENDOR_ID)); } else { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } } static struct pci_operations pci_ops = { .set_subsystem = set_subsystem, }; static struct device_operations device_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = intel_me_init, .scan_bus = scan_static_bus, .ops_pci = &pci_ops, }; static const struct pci_driver intel_me __pci_driver = { .ops = &device_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x1e3a, }; /****************************************************************************** * */ static u32 me_to_host_words_pending(void) { struct mei_csr me; read_me_csr(&me); if (!me.ready) return 0; return (me.buffer_write_ptr - me.buffer_read_ptr) & (me.buffer_depth - 1); } #if 0 /* This function is not yet being used, keep it in for the future. */ static u32 host_to_me_words_room(void) { struct mei_csr csr; read_me_csr(&csr); if (!csr.ready) return 0; read_host_csr(&csr); return (csr.buffer_read_ptr - csr.buffer_write_ptr - 1) & (csr.buffer_depth - 1); } #endif /* * mbp seems to be following its own flow, let's retrieve it in a dedicated * function. */ static int intel_me_read_mbp(me_bios_payload *mbp_data) { mbp_header mbp_hdr; mbp_item_header mbp_item_hdr; u32 me2host_pending; u32 mbp_item_id; struct mei_csr host; me2host_pending = me_to_host_words_pending(); if (!me2host_pending) { printk(BIOS_ERR, "ME: no mbp data!\n"); return -1; } /* we know for sure that at least the header is there */ mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW); if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) || (me2host_pending < mbp_hdr.mbp_size)) { printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words" " buffer contains %d words\n", mbp_hdr.num_entries, mbp_hdr.mbp_size, me2host_pending); return -1; } me2host_pending--; memset(mbp_data, 0, sizeof(*mbp_data)); while (mbp_hdr.num_entries--) { u32* copy_addr; u32 copy_size, buffer_room; void *p; if (!me2host_pending) { printk(BIOS_ERR, "ME: no mbp data %d entries to go!\n", mbp_hdr.num_entries + 1); return -1; } mei_read_dword_ptr(&mbp_item_hdr, MEI_ME_CB_RW); if (mbp_item_hdr.length > me2host_pending) { printk(BIOS_ERR, "ME: insufficient mbp data %d " "entries to go!\n", mbp_hdr.num_entries + 1); return -1; } me2host_pending -= mbp_item_hdr.length; mbp_item_id = (((u32)mbp_item_hdr.item_id) << 8) + mbp_item_hdr.app_id; copy_size = mbp_item_hdr.length - 1; #define SET_UP_COPY(field) { copy_addr = (u32 *)&mbp_data->field; \ buffer_room = sizeof(mbp_data->field) / sizeof(u32); \ break; \ } p = &mbp_item_hdr; printk(BIOS_INFO, "ME: MBP item header %8.8x\n", *((u32*)p)); switch(mbp_item_id) { case 0x101: SET_UP_COPY(fw_version_name); case 0x102: SET_UP_COPY(icc_profile); case 0x103: SET_UP_COPY(at_state); case 0x201: mbp_data->fw_caps_sku.available = 1; SET_UP_COPY(fw_caps_sku.fw_capabilities); case 0x301: SET_UP_COPY(rom_bist_data); case 0x401: SET_UP_COPY(platform_key); case 0x501: mbp_data->fw_plat_type.available = 1; SET_UP_COPY(fw_plat_type.rule_data); case 0x601: SET_UP_COPY(mfsintegrity); default: printk(BIOS_ERR, "ME: unknown mbp item id 0x%x!!!\n", mbp_item_id); return -1; } if (buffer_room != copy_size) { printk(BIOS_ERR, "ME: buffer room %d != %d copy size" " for item 0x%x!!!\n", buffer_room, copy_size, mbp_item_id); return -1; } while(copy_size--) *copy_addr++ = read_cb(); } read_host_csr(&host); host.interrupt_generate = 1; write_host_csr(&host); { int cntr = 0; while(host.interrupt_generate) { read_host_csr(&host); cntr++; } printk(BIOS_SPEW, "ME: mbp read OK after %d cycles\n", cntr); } return 0; } #endif /* !__SMM__ */