1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2017 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <soc/iomap.h>
#include <soc/pci_devs.h>
#include <soc/thermal.h>
#include "chip.h"
#define MAX_TRIP_TEMP 205
#define DEFAULT_TRIP_TEMP 50
static void *pch_thermal_get_bar(struct device *dev)
{
uintptr_t bar;
bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
/*
* Bits [31:12] are the base address as per EDS for Thermal Device,
* Don't care about [11:0] bits
*/
return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK);
}
static void pch_thermal_set_bar(struct device *dev, uintptr_t tempbar)
{
uint8_t pcireg;
/* Assign Resources to Thermal Device */
/* Clear BIT 1-2 of Command Register */
pcireg = pci_read_config8(dev, PCI_COMMAND);
pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
pci_write_config8(dev, PCI_COMMAND, pcireg);
/* Program Temporary BAR for Thermal Device */
pci_write_config32(dev, PCI_BASE_ADDRESS_0, tempbar);
pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0x0);
/* Enable Bus Master and MMIO Space */
pcireg = pci_read_config8(dev, PCI_COMMAND);
pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_write_config8(dev, PCI_COMMAND, pcireg);
}
/* PCH Low Temp Threshold (LTT) */
static uint16_t pch_get_ltt_value(struct device *dev)
{
struct soc_intel_skylake_config *config;
uint16_t ltt_value;
uint16_t trip_temp = DEFAULT_TRIP_TEMP;
config = config_of(dev);
if (config->pch_trip_temp)
trip_temp = config->pch_trip_temp;
if (trip_temp > MAX_TRIP_TEMP)
die("Input PCH temp trip is higher than allowed range!");
/* Trip Point Temp = (LTT / 2 - 50 degree C) */
ltt_value = (trip_temp + 50) * 2;
return ltt_value;
}
/* Enable thermal sensor power management */
void pch_thermal_configuration(void)
{
uint16_t reg16;
struct device *dev = PCH_DEV_THERMAL;
if (!dev) {
printk(BIOS_ERR, "PCH_DEV_THERMAL device not found!\n");
return;
}
void *thermalbar = pch_thermal_get_bar(dev);
/* Use default pre-ram bar */
if (!thermalbar) {
pch_thermal_set_bar(dev, THERMAL_BASE_ADDRESS);
thermalbar = (void *)THERMAL_BASE_ADDRESS;
}
/* Set Low Temp Threshold (LTT) at TSPM offset 0x1c[8:0] */
reg16 = read16(thermalbar + THERMAL_SENSOR_POWER_MANAGEMENT);
reg16 &= ~0x1ff;
/* Low Temp Threshold (LTT) */
reg16 |= pch_get_ltt_value(dev);
write16(thermalbar + THERMAL_SENSOR_POWER_MANAGEMENT, reg16);
}
|
