1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/mmio.h>
#include <console/console.h>
#include <spi_flash.h>
#include <spi-generic.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <types.h>
#include "SBPLATFORM.h"
#include <vendorcode/amd/cimx/sb800/ECfan.h>
#define AMD_SB_SPI_TX_LEN 8
static uintptr_t spibar;
static void reset_internal_fifo_pointer(void)
{
do {
write8((void *)(spibar + 2),
read8((void *)(spibar + 2)) | 0x10);
} while (read8((void *)(spibar + 0xD)) & 0x7);
}
static void execute_command(void)
{
write8((void *)(spibar + 2), read8((void *)(spibar + 2)) | 1);
while ((read8((void *)(spibar + 2)) & 1) &&
(read8((void *)(spibar+3)) & 0x80));
}
void spi_init()
{
struct device *dev;
dev = pcidev_on_root(0x14, 3);
spibar = pci_read_config32(dev, 0xA0) & ~0x1F;
}
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
size_t bytesout, void *din, size_t bytesin)
{
/* First byte is cmd which can not be sent through FIFO. */
u8 cmd = *(u8 *)dout++;
u8 readoffby1;
u8 readwrite;
size_t count;
bytesout--;
/*
* Check if this is a write command attempting to transfer more bytes
* than the controller can handle. Iterations for writes are not
* supported here because each SPI write command needs to be preceded
* and followed by other SPI commands, and this sequence is controlled
* by the SPI chip driver.
*/
if (bytesout > AMD_SB_SPI_TX_LEN) {
printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI chip driver use"
" spi_crop_chunk()?\n");
return -1;
}
readoffby1 = bytesout ? 0 : 1;
readwrite = (bytesin + readoffby1) << 4 | bytesout;
write8((void *)(spibar + 1), readwrite);
write8((void *)(spibar + 0), cmd);
reset_internal_fifo_pointer();
for (count = 0; count < bytesout; count++, dout++) {
write8((void *)(spibar + 0x0C), *(u8 *)dout);
}
reset_internal_fifo_pointer();
execute_command();
reset_internal_fifo_pointer();
/* Skip the bytes we sent. */
for (count = 0; count < bytesout; count++) {
read8((void *)(spibar + 0x0C));
}
reset_internal_fifo_pointer();
for (count = 0; count < bytesin; count++, din++) {
*(u8 *)din = read8((void *)(spibar + 0x0C));
}
return 0;
}
static void ImcSleep(void)
{
u8 cmd_val = 0x96; /* Kick off IMC Mailbox command 96 */
u8 reg0_val = 0; /* clear response register */
u8 reg1_val = 0xB4; /* request ownership flag */
WriteECmsg (MSG_REG0, AccWidthUint8, ®0_val);
WriteECmsg (MSG_REG1, AccWidthUint8, ®1_val);
WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &cmd_val);
WaitForEcLDN9MailboxCmdAck();
}
static void ImcWakeup(void)
{
u8 cmd_val = 0x96; /* Kick off IMC Mailbox command 96 */
u8 reg0_val = 0; /* clear response register */
u8 reg1_val = 0xB5; /* release ownership flag */
WriteECmsg (MSG_REG0, AccWidthUint8, ®0_val);
WriteECmsg (MSG_REG1, AccWidthUint8, ®1_val);
WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &cmd_val);
WaitForEcLDN9MailboxCmdAck();
}
int chipset_volatile_group_begin(const struct spi_flash *flash)
{
if (!CONFIG(SB800_IMC_FWM))
return 0;
ImcSleep();
return 0;
}
int chipset_volatile_group_end(const struct spi_flash *flash)
{
if (!CONFIG(SB800_IMC_FWM))
return 0;
ImcWakeup();
return 0;
}
static int xfer_vectors(const struct spi_slave *slave,
struct spi_op vectors[], size_t count)
{
return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
}
static const struct spi_ctrlr spi_ctrlr = {
.xfer_vector = xfer_vectors,
.max_xfer_size = AMD_SB_SPI_TX_LEN,
.flags = SPI_CNTRLR_DEDUCT_CMD_LEN,
};
const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
{
.ctrlr = &spi_ctrlr,
.bus_start = 0,
.bus_end = 0,
},
};
const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
|
