From 5d6a636c798444d2e7a93b13c5078d245f2f97f2 Mon Sep 17 00:00:00 2001 From: eric_tian Date: Tue, 18 Aug 2009 07:00:38 +0000 Subject: add Dhcp6/Mtftp6/Udp6 three protocol's definitions into MdePkg to comply with UEFI2.3 spec. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9087 6f19259b-4bc3-4df7-8a09-765794883524 --- MdePkg/Include/Protocol/Udp6.h | 569 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 569 insertions(+) create mode 100644 MdePkg/Include/Protocol/Udp6.h (limited to 'MdePkg/Include/Protocol/Udp6.h') diff --git a/MdePkg/Include/Protocol/Udp6.h b/MdePkg/Include/Protocol/Udp6.h new file mode 100644 index 0000000000..8709a09b26 --- /dev/null +++ b/MdePkg/Include/Protocol/Udp6.h @@ -0,0 +1,569 @@ +/** @file + The EFI UDPv6 (User Datagram Protocol version 6) Protocol Definition, which is built upon + the EFI IPv6 Protocol and provides simple packet-oriented services to transmit and receive + UDP packets. + +Copyright (c) 2008 - 2009, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __EFI_UDP6_PROTOCOL_H__ +#define __EFI_UDP6_PROTOCOL_H__ + +#include + +#define EFI_UDP6_SERVICE_BINDING_PROTOCOL_GUID \ + { \ + 0x66ed4721, 0x3c98, 0x4d3e, {0x81, 0xe3, 0xd0, 0x3d, 0xd3, 0x9a, 0x72, 0x54 } \ + } + +#define EFI_UDP6_PROTOCOL_GUID \ + { \ + 0x4f948815, 0xb4b9, 0x43cb, {0x8a, 0x33, 0x90, 0xe0, 0x60, 0xb3, 0x49, 0x55 } \ + } + +typedef struct { + /// + /// The EFI UDPv6 Protocol instance handle that is using this address/port pair. + /// + EFI_HANDLE InstanceHandle; + /// + /// The IPv6 address to which this instance of the EFI UDPv6 Protocol is bound. + /// Set to 0::/128, if this instance is used to listen all packets from any + /// source address. + /// + EFI_IPv6_ADDRESS LocalAddress; + /// + /// The port number in host byte order on which the service is listening. + /// + UINT16 LocalPort; + /// + /// The IPv6 address of the remote host. May be 0::/128 if it is not connected + /// to any remote host or connected with more than one remote host. + /// + EFI_IPv6_ADDRESS RemoteAddress; + /// + /// The port number in host byte order on which the remote host is + /// listening. Maybe zero if it is not connected to any remote host. + /// + UINT16 RemotePort; +} EFI_UDP6_SERVICE_POINT; + +typedef struct { + /// + /// The handle of the driver that creates this entry. + /// + EFI_HANDLE DriverHandle; + /// + /// The number of address/port pairs that follow this data structure. + /// + UINT32 ServiceCount; + /// + /// List of address/port pairs that are currently in use. + /// + EFI_UDP6_SERVICE_POINT Services[1]; +} EFI_UDP6_VARIABLE_DATA; + +typedef struct _EFI_UDP6_PROTOCOL EFI_UDP6_PROTOCOL; + +/// +/// EFI_UDP6_FRAGMENT_DATA allows multiple receive or transmit buffers to be specified. +/// The purpose of this structure is to avoid copying the same packet multiple times. +/// +typedef struct { + UINT32 FragmentLength; ///< Length of the fragment data buffer. + VOID *FragmentBuffer; ///< Pointer to the fragment data buffer. +} EFI_UDP6_FRAGMENT_DATA; + +/// +/// The EFI_UDP6_SESSION_DATA is used to retrieve the settings when receiving packets or +/// to override the existing settings (only DestinationAddress and DestinationPort can +/// be overridden) of this EFI UDPv6 Protocol instance when sending packets. +/// +typedef struct { + /// + /// Address from which this packet is sent. This field should not be used when + /// sending packets. + /// + EFI_IPv6_ADDRESS SourceAddress; + /// + /// Port from which this packet is sent. It is in host byte order. This field should + /// not be used when sending packets. + /// + UINT16 SourcePort; + /// + /// Address to which this packet is sent. When sending packet, itĄŻll be ignored + /// if it is zero. + /// + EFI_IPv6_ADDRESS DestinationAddress; + /// + /// Port to which this packet is sent. When sending packet, itĄŻll be + /// ignored if it is zero. + /// + UINT16 DestinationPort; +} EFI_UDP6_SESSION_DATA; + +typedef struct { + /// + /// Set to TRUE to accept UDP packets that are sent to any address. + /// + BOOLEAN AcceptPromiscuous; + /// + /// Set to TRUE to accept UDP packets that are sent to any port. + /// + BOOLEAN AcceptAnyPort; + /// + /// Set to TRUE to allow this EFI UDPv6 Protocol child instance to open a port number + /// that is already being used by another EFI UDPv6 Protocol child instance. + /// + BOOLEAN AllowDuplicatePort; + /// + /// TrafficClass field in transmitted IPv6 packets. + /// + UINT8 TrafficClass; + /// + /// HopLimit field in transmitted IPv6 packets. + /// + UINT8 HopLimit; + /// + /// The receive timeout value (number of microseconds) to be associated with each + /// incoming packet. Zero means do not drop incoming packets. + /// + UINT32 ReceiveTimeout; + /// + /// The transmit timeout value (number of microseconds) to be associated with each + /// outgoing packet. Zero means do not drop outgoing packets. + /// + UINT32 TransmitTimeout; + /// + /// The station IP address that will be assigned to this EFI UDPv6 Protocol instance. + /// The EFI UDPv6 and EFI IPv6 Protocol drivers will only deliver incoming packets + /// whose destination matches this IP address exactly. Address 0::/128 is also accepted + /// as a special case. Under this situation, underlying IPv6 driver is responsible for + /// binding a source address to this EFI IPv6 protocol instance according to source + /// address selection algorithm. Only incoming packet from the selected source address + /// is delivered. This field can be set and changed only when the EFI IPv6 driver is + /// transitioning from the stopped to the started states. If no address is available + /// for selecting, the EFI IPv6 Protocol driver will use EFI_IP6_CONFIG_PROTOCOL to + /// retrieve the IPv6 address. + EFI_IPv6_ADDRESS StationAddress; + /// + /// The port number to which this EFI UDPv6 Protocol instance is bound. If a client + /// of the EFI UDPv6 Protocol does not care about the port number, set StationPort + /// to zero. The EFI UDPv6 Protocol driver will assign a random port number to transmitted + /// UDP packets. Ignored it if AcceptAnyPort is TRUE. + /// + UINT16 StationPort; + /// + /// The IP address of remote host to which this EFI UDPv6 Protocol instance is connecting. + /// If RemoteAddress is not 0::/128, this EFI UDPv6 Protocol instance will be connected to + /// RemoteAddress; i.e., outgoing packets of this EFI UDPv6 Protocol instance will be sent + /// to this address by default and only incoming packets from this address will be delivered + /// to client. Ignored for incoming filtering if AcceptPromiscuous is TRUE. + EFI_IPv6_ADDRESS RemoteAddress; + /// + /// The port number of the remote host to which this EFI UDPv6 Protocol instance is connecting. + /// If it is not zero, outgoing packets of this EFI UDPv6 Protocol instance will be sent to + /// this port number by default and only incoming packets from this port will be delivered + /// to client. Ignored if RemoteAddress is 0::/128 and ignored for incoming filtering if + /// AcceptPromiscuous is TRUE. + UINT16 RemotePort; +} EFI_UDP6_CONFIG_DATA; + +/// +/// The EFI UDPv6 Protocol client must fill this data structure before sending a packet. +/// The packet may contain multiple buffers that may be not in a continuous memory location. +/// +typedef struct { + /// + /// If not NULL, the data that is used to override the transmitting settings.Only the two + /// filed UdpSessionData.DestinationAddress and UdpSessionData.DestionPort can be used as + /// the transmitting setting filed. + /// + EFI_UDP6_SESSION_DATA *UdpSessionData; + /// + /// Sum of the fragment data length. Must not exceed the maximum UDP packet size. + /// + UINT32 DataLength; + /// + /// Number of fragments. + /// + UINT32 FragmentCount; + /// + /// Array of fragment descriptors. + /// + EFI_UDP6_FRAGMENT_DATA FragmentTable[1]; +} EFI_UDP6_TRANSMIT_DATA; + +/// +/// EFI_UDP6_RECEIVE_DATA is filled by the EFI UDPv6 Protocol driver when this EFI UDPv6 +/// Protocol instance receives an incoming packet. If there is a waiting token for incoming +/// packets, the CompletionToken.Packet.RxData field is updated to this incoming packet and +/// the CompletionToken.Event is signaled. The EFI UDPv6 Protocol client must signal the +/// RecycleSignal after processing the packet. +/// FragmentTable could contain multiple buffers that are not in the continuous memory locations. +/// The EFI UDPv6 Protocol client might need to combine two or more buffers in FragmentTable to +/// form their own protocol header. +/// +typedef struct { + /// + /// Time when the EFI UDPv6 Protocol accepted the packet. + /// + EFI_TIME TimeStamp; + /// + /// Indicates the event to signal when the received data has been processed. + /// + EFI_EVENT RecycleSignal; + /// + /// The UDP session data including SourceAddress, SourcePort, DestinationAddress, + /// and DestinationPort. + /// + EFI_UDP6_SESSION_DATA UdpSession; + /// + /// The sum of the fragment data length. + /// + UINT32 DataLength; + /// + /// Number of fragments. Maybe zero. + /// + UINT32 FragmentCount; + /// + /// Array of fragment descriptors. Maybe zero. + /// + EFI_UDP6_FRAGMENT_DATA FragmentTable[1]; +} EFI_UDP6_RECEIVE_DATA; + +/// +/// The EFI_UDP6_COMPLETION_TOKEN structures are used for both transmit and receive operations. +/// When used for transmitting, the Event and TxData fields must be filled in by the EFI UDPv6 +/// Protocol client. After the transmit operation completes, the Status field is updated by the +/// EFI UDPv6 Protocol and the Event is signaled. +/// When used for receiving, only the Event field must be filled in by the EFI UDPv6 Protocol +/// client. After a packet is received, RxData and Status are filled in by the EFI UDPv6 Protocol +/// and the Event is signaled. +/// +typedef struct { + /// + /// This Event will be signaled after the Status field is updated by the EFI UDPv6 Protocol + /// driver. The type of Event must be EVT_NOTIFY_SIGNAL. + /// + EFI_EVENT Event; + /// + /// Will be set to one of the following values: + /// - EFI_SUCCESS: The receive or transmit operation completed successfully. + /// - EFI_ABORTED: The receive or transmit was aborted. + /// - EFI_TIMEOUT: The transmit timeout expired. + /// - EFI_NETWORK_UNREACHABLE: The destination network is unreachable. RxData is set to + /// NULL in this situation. + /// - EFI_HOST_UNREACHABLE: The destination host is unreachable. RxData is set to NULL in + /// this situation. + /// - EFI_PROTOCOL_UNREACHABLE: The UDP protocol is unsupported in the remote system. + /// RxData is set to NULL in this situation. + /// - EFI_PORT_UNREACHABLE: No service is listening on the remote port. RxData is set to + /// NULL in this situation. + /// - EFI_ICMP_ERROR: Some other Internet Control Message Protocol (ICMP) error report was + /// received. For example, packets are being sent too fast for the destination to receive them + /// and the destination sent an ICMP source quench report. RxData is set to NULL in this situation. + /// - EFI_DEVICE_ERROR: An unexpected system or network error occurred. + /// - EFI_SECURITY_VIOLATION: The transmit or receive was failed because of IPsec policy check. + /// + EFI_STATUS Status; + union { + /// + /// When this token is used for receiving, RxData is a pointer to EFI_UDP6_RECEIVE_DATA. + /// + EFI_UDP6_RECEIVE_DATA *RxData; + /// + /// When this token is used for transmitting, TxData is a pointer to EFI_UDP6_TRANSMIT_DATA. + /// + EFI_UDP6_TRANSMIT_DATA *TxData; + } Packet; +} EFI_UDP6_COMPLETION_TOKEN; + +/** + Read the current operational settings. + + The GetModeData() function copies the current operational settings of this EFI UDPv6 Protocol + instance into user-supplied buffers. This function is used optionally to retrieve the operational + mode data of underlying networks or drivers. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[out] Udp6ConfigData The buffer in which the current UDP configuration data is returned. + @param[out] Ip6ModeData The buffer in which the current EFI IPv6 Protocol mode data is returned. + @param[out] MnpConfigData The buffer in which the current managed network configuration data is + returned. + @param[out] SnpModeData The buffer in which the simple network mode data is returned. + + @retval EFI_SUCCESS The mode data was read. + @retval EFI_NOT_STARTED When Udp6ConfigData is queried, no configuration data is available + because this instance has not been started. + @retval EFI_INVALID_PARAMETER This is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_GET_MODE_DATA)( + IN EFI_UDP6_PROTOCOL *This, + OUT EFI_UDP6_CONFIG_DATA *Udp6ConfigData OPTIONAL, + OUT EFI_IP6_MODE_DATA *Ip6ModeData OPTIONAL, + OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, + OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL +); + +/** + Initializes, changes, or resets the operational parameters for this instance of the EFI UDPv6 + Protocol. + + The Configure() function is used to do the following: + - Initialize and start this instance of the EFI UDPv6 Protocol. + - Change the filtering rules and operational parameters. + - Reset this instance of the EFI UDPv6 Protocol. + + Until these parameters are initialized, no network traffic can be sent or received by this instance. + This instance can be also reset by calling Configure() with UdpConfigData set to NULL. + Once reset, the receiving queue and transmitting queue are flushed and no traffic is allowed through + this instance. + + With different parameters in UdpConfigData, Configure() can be used to bind this instance to specified + port. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[in] UdpConfigData Pointer to the buffer contained the configuration data. + + @retval EFI_SUCCESS The configuration settings were set, changed, or reset successfully. + @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source + address for this instance, but no source address was available for use. + @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: + - This is NULL. + - UdpConfigData.StationAddress neither zero nor one of the configured IP + addresses in the underlying IPv6 driver. + - UdpConfigData.RemoteAddress is not a valid unicast IPv6 address if it + is not zero. + @retval EFI_ALREADY_STARTED The EFI UDPv6 Protocol instance is already started/configured and must be + stopped/reset before it can be reconfigured. Only TrafficClass, HopLimit, + ReceiveTimeout, and TransmitTimeout can be reconfigured without stopping + the current instance of the EFI UDPv6 Protocol. + @retval EFI_ACCESS_DENIED UdpConfigData.AllowDuplicatePort is FALSE and UdpConfigData.StationPort + is already used by other instance. + @retval EFI_OUT_OF_RESOURCES The EFI UDPv6 Protocol driver cannot allocate memory for this EFI UDPv6 + Protocol instance. + @retval EFI_DEVICE_ERROR An unexpected network or system error occurred and this instance was not + opened. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_CONFIGURE)( + IN EFI_UDP6_PROTOCOL *This, + IN EFI_UDP6_CONFIG_DATA *UdpConfigData OPTIONAL +); + +/** + Joins and leaves multicast groups. + + The Groups() function is used to join or leave one or more multicast group. + If the JoinFlag is FALSE and the MulticastAddress is NULL, then all currently joined groups are left. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[in] JoinFlag Set to TRUE to join a multicast group. Set to FALSE to leave one + or all multicast groups. + @param[in] MulticastAddress Pointer to multicast group address to join or leave. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_NOT_STARTED The EFI UDPv6 Protocol instance has not been started. + @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + - This is NULL. + - JoinFlag is TRUE and MulticastAddress is NULL. + - JoinFlag is TRUE and *MulticastAddress is not a valid multicast address. + @retval EFI_ALREADY_STARTED The group address is already in the group table (when JoinFlag is TRUE). + @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE). + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_GROUPS)( + IN EFI_UDP6_PROTOCOL *This, + IN BOOLEAN JoinFlag, + IN EFI_IPv6_ADDRESS *MulticastAddress OPTIONAL +); + +/** + Queues outgoing data packets into the transmit queue. + + The Transmit() function places a sending request to this instance of the EFI UDPv6 Protocol, + alongside the transmit data that was filled by the user. Whenever the packet in the token is + sent out or some errors occur, the Token.Event will be signaled and Token.Status is updated. + Providing a proper notification function and context for the event will enable the user to + receive the notification and transmitting status. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[in] Token Pointer to the completion token that will be placed into the + transmit queue. + + @retval EFI_SUCCESS The data has been queued for transmission. + @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been started. + @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source + address for this instance, but no source address was available + for use. + @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: + - This is NULL. + - Token is NULL. + - Token.Event is NULL. + - Token.Packet.TxData is NULL. + - Token.Packet.TxData.FragmentCount is zero. + - Token.Packet.TxData.DataLength is not equal to the sum of fragment + lengths. + - One or more of the Token.Packet.TxData.FragmentTable[].FragmentLength + fields is zero. + - One or more of the Token.Packet.TxData.FragmentTable[].FragmentBuffer + fields is NULL. + - Token.Packet.TxData.UdpSessionData.DestinationAddress is not zero + and is not valid unicast Ipv6 address if UdpSessionData is not NULL. + - Token.Packet.TxData.UdpSessionData is NULL and this instanceĄŻs + UdpConfigData.RemoteAddress is unspecified. + - Token.Packet.TxData.UdpSessionData.DestinationAddress is non-zero + when DestinationAddress is configured as non-zero when doing Configure() + for this EFI Udp6 protocol instance. + - Token.Packet.TxData.UdpSesionData.DestinationAddress is zero when + DestinationAddress is unspecified when doing Configure() for this + EFI Udp6 protocol instance. + @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event was already + in the transmit queue. + @retval EFI_NOT_READY The completion token could not be queued because the transmit queue + is full. + @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. + @retval EFI_NOT_FOUND There is no route to the destination network or address. + @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP packet size. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_TRANSMIT)( + IN EFI_UDP6_PROTOCOL *This, + IN EFI_UDP6_COMPLETION_TOKEN *Token +); + +/** + Places an asynchronous receive request into the receiving queue. + + The Receive() function places a completion token into the receive packet queue. This function is + always asynchronous. + The caller must fill in the Token.Event field in the completion token, and this field cannot be + NULL. When the receive operation completes, the EFI UDPv6 Protocol driver updates the Token.Status + and Token.Packet.RxData fields and the Token.Event is signaled. + Providing a proper notification function and context for the event will enable the user to receive + the notification and receiving status. That notification function is guaranteed to not be re-entered. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[in] Token Pointer to a token that is associated with the receive data descriptor. + + @retval EFI_SUCCESS The receive completion token was cached. + @retval EFI_NOT_STARTED This EFI UDPv6 Protocol instance has not been started. + @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source + address for this instance, but no source address was available + for use. + @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: + - This is NULL. + - Token is NULL. + - Token.Event is NULL. + @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system + resources (usually memory). + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI UDPv6 Protocol + instance has been reset to startup defaults. + @retval EFI_ACCESS_DENIED A receive completion token with the same Token.Event was already in + the receive queue. + @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_RECEIVE)( + IN EFI_UDP6_PROTOCOL *This, + IN EFI_UDP6_COMPLETION_TOKEN *Token +); + +/** + Aborts an asynchronous transmit or receive request. + + The Cancel() function is used to abort a pending transmit or receive request. If the token is in the + transmit or receive request queues, after calling this function, Token.Status will be set to + EFI_ABORTED and then Token.Event will be signaled. If the token is not in one of the queues, + which usually means that the asynchronous operation has completed, this function will not signal the + token and EFI_NOT_FOUND is returned. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + @param[in] Token Pointer to a token that has been issued by EFI_UDP6_PROTOCOL.Transmit() + or EFI_UDP6_PROTOCOL.Receive().If NULL, all pending tokens are aborted. + + @retval EFI_SUCCESS The asynchronous I/O request was aborted and Token.Event was signaled. + When Token is NULL, all pending requests are aborted and their events + are signaled. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_STARTED This instance has not been started. + @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was not found in + the transmit or receive queue. It has either completed or was not issued + by Transmit() and Receive(). + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_CANCEL)( + IN EFI_UDP6_PROTOCOL *This, + IN EFI_UDP6_COMPLETION_TOKEN *Token OPTIONAL +); + +/** + Polls for incoming data packets and processes outgoing data packets. + + The Poll() function can be used by network drivers and applications to increase the rate that data + packets are moved between the communications device and the transmit and receive queues. + In some systems, the periodic timer event in the managed network driver may not poll the underlying + communications device fast enough to transmit and/or receive all data packets without missing incoming + packets or dropping outgoing packets. Drivers and applications that are experiencing packet loss should + try calling the Poll() function more often. + + @param[in] This Pointer to the EFI_UDP6_PROTOCOL instance. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. + Consider increasing the polling rate. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UDP6_POLL)( + IN EFI_UDP6_PROTOCOL *This +); + +/// +/// The EFI_UDP6_PROTOCOL defines an EFI UDPv6 Protocol session that can be used by any network drivers, +/// applications, or daemons to transmit or receive UDP packets. This protocol instance can either be +/// bound to a specified port as a service or connected to some remote peer as an active client. +/// Each instance has its own settings, such as group table, that are independent from each other. +/// +struct _EFI_UDP6_PROTOCOL { + EFI_UDP6_GET_MODE_DATA GetModeData; + EFI_UDP6_CONFIGURE Configure; + EFI_UDP6_GROUPS Groups; + EFI_UDP6_TRANSMIT Transmit; + EFI_UDP6_RECEIVE Receive; + EFI_UDP6_CANCEL Cancel; + EFI_UDP6_POLL Poll; +}; + +extern EFI_GUID gEfiUdp6ServiceBindingProtocolGuid; +extern EFI_GUID gEfiUdp6ProtocolGuid; +extern EFI_GUID gEfiUdp6RegistryDataGuid; + +#endif -- cgit v1.2.3