From 1a3eaf06d52a64b4de0942700ba4c01533f53e0f Mon Sep 17 00:00:00 2001 From: xli24 Date: Tue, 11 Nov 2008 08:33:02 +0000 Subject: Add following library instances to MDE package: 1. DxePciLibPciRootBridgeIo 2. DxePciSegmentLibPciRootBridgeIo 3. PeiPciLibPciCfg2 4. PeiPciSegmentLibPciCfg2 5. UefiPalLib 6. UefiSalLib git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6451 6f19259b-4bc3-4df7-8a09-765794883524 --- MdePkg/Library/PeiPciLibPciCfg2/PciLib.c | 1372 ++++++++++++++++++++ .../Library/PeiPciLibPciCfg2/PeiPciLibPciCfg2.inf | 55 + 2 files changed, 1427 insertions(+) create mode 100644 MdePkg/Library/PeiPciLibPciCfg2/PciLib.c create mode 100644 MdePkg/Library/PeiPciLibPciCfg2/PeiPciLibPciCfg2.inf (limited to 'MdePkg/Library/PeiPciLibPciCfg2') diff --git a/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c b/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c new file mode 100644 index 0000000000..d3d96790c5 --- /dev/null +++ b/MdePkg/Library/PeiPciLibPciCfg2/PciLib.c @@ -0,0 +1,1372 @@ +/** @file + PCI Library using PCI CFG2 PPI. + + Copyright (c) 2007 - 2008, Intel Corporation All rights + reserved. This program and the accompanying materials are + licensed and made available under the terms and conditions of + the BSD License which accompanies this distribution. The full + text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include + +#include + +#include +#include +#include +#include +#include + +/** + Assert the validity of a PCI address. A valid PCI address should contain 1's + only in the low 28 bits. + + @param A The address to validate. + @param M Additional bits to assert to be zero. + +**/ +#define ASSERT_INVALID_PCI_ADDRESS(A,M) \ + ASSERT (((A) & (~0xfffffff | (M))) == 0) + +/** + Translate PCI Lib address into format of PCI CFG2 PPI. + + @param A Address that encodes the PCI Bus, Device, Function and + Register. + +**/ +#define PCI_TO_PCICFG2_ADDRESS(A) \ + (((A) << 4) & 0xff000000) | (((A) >> 4) & 0x00000700) | (((A) << 1) & 0x001f0000) | ((UINT64)((A) & 0xFFF) << 32) + +/** + Internal worker function to read a PCI configuration register. + + This function wraps EFI_PEI_PCI_CFG2_PPI.Read() service. + It reads and returns the PCI configuration register specified by Address, + the width of data is specified by Width. + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param Width Width of data to read + + @return The value read from the PCI configuration register. + +**/ +UINT32 +PeiPciLibPciCfg2ReadWorker ( + IN UINTN Address, + IN EFI_PEI_PCI_CFG_PPI_WIDTH Width + ) +{ + EFI_STATUS Status; + UINT32 Data; + CONST EFI_PEI_PCI_CFG2_PPI *PciCfg2Ppi; + + Status = PeiServicesLocatePpi (&gEfiPciCfg2PpiGuid, 0, NULL, (VOID **) &PciCfg2Ppi); + ASSERT_EFI_ERROR (Status); + ASSERT (PciCfg2Ppi != NULL); + + PciCfg2Ppi->Read ( + GetPeiServicesTablePointer (), + PciCfg2Ppi, + Width, + PCI_TO_PCICFG2_ADDRESS (Address), + &Data + ); + + return Data; +} + +/** + Internal worker function to writes a PCI configuration register. + + This function wraps EFI_PEI_PCI_CFG2_PPI.Write() service. + It writes the PCI configuration register specified by Address with the + value specified by Data. The width of data is specifed by Width. + Data is returned. + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param Width Width of data to write + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +PeiPciLibPciCfg2WriteWorker ( + IN UINTN Address, + IN EFI_PEI_PCI_CFG_PPI_WIDTH Width, + IN UINT32 Data + ) +{ + EFI_STATUS Status; + CONST EFI_PEI_PCI_CFG2_PPI *PciCfg2Ppi; + + Status = PeiServicesLocatePpi (&gEfiPciCfg2PpiGuid, 0, NULL, (VOID **) &PciCfg2Ppi); + ASSERT_EFI_ERROR (Status); + ASSERT (PciCfg2Ppi != NULL); + + PciCfg2Ppi->Write ( + GetPeiServicesTablePointer (), + PciCfg2Ppi, + Width, + PCI_TO_PCICFG2_ADDRESS (Address), + &Data + ); + + return Data; +} + +/** + Reads an 8-bit PCI configuration register. + + Reads and returns the 8-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + + @return The value read from the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciRead8 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 0); + + return (UINT8) PeiPciLibPciCfg2ReadWorker (Address, EfiPeiPciCfgWidthUint8); +} + +/** + Writes an 8-bit PCI configuration register. + + Writes the 8-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciWrite8 ( + IN UINTN Address, + IN UINT8 Data + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 0); + + return (UINT8) PeiPciLibPciCfg2WriteWorker (Address, EfiPeiPciCfgWidthUint8, Data); +} + +/** + Performs a bitwise inclusive OR of an 8-bit PCI configuration register with + an 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciOr8 ( + IN UINTN Address, + IN UINT8 OrData + ) +{ + return PciWrite8 (Address, (UINT8) (PciRead8 (Address) | OrData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit + value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciAnd8 ( + IN UINTN Address, + IN UINT8 AndData + ) +{ + return PciWrite8 (Address, (UINT8) (PciRead8 (Address) & AndData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit + value, followed a bitwise inclusive OR with another 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise inclusive OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciAndThenOr8 ( + IN UINTN Address, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciWrite8 (Address, (UINT8) ((PciRead8 (Address) & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in an 8-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciBitFieldRead8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead8 (PciRead8 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 8-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciBitFieldWrite8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ) +{ + return PciWrite8 ( + Address, + BitFieldWrite8 (PciRead8 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciBitFieldOr8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ) +{ + return PciWrite8 ( + Address, + BitFieldOr8 (PciRead8 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 8-bit register. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciBitFieldAnd8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ) +{ + return PciWrite8 ( + Address, + BitFieldAnd8 (PciRead8 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a + bitwise inclusive OR, and writes the result back to the bit field in the + 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise inclusive OR between the read result and + the value specified by AndData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciBitFieldAndThenOr8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciWrite8 ( + Address, + BitFieldAndThenOr8 (PciRead8 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a 16-bit PCI configuration register. + + Reads and returns the 16-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + + @return The value read from the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciRead16 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 1); + + return (UINT16) PeiPciLibPciCfg2ReadWorker (Address, EfiPeiPciCfgWidthUint16); +} + +/** + Writes a 16-bit PCI configuration register. + + Writes the 16-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciWrite16 ( + IN UINTN Address, + IN UINT16 Data + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 1); + + return (UINT16) PeiPciLibPciCfg2WriteWorker (Address, EfiPeiPciCfgWidthUint16, Data); +} + +/** + Performs a bitwise inclusive OR of a 16-bit PCI configuration register with + a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciOr16 ( + IN UINTN Address, + IN UINT16 OrData + ) +{ + return PciWrite16 (Address, (UINT16) (PciRead16 (Address) | OrData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit + value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 16-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciAnd16 ( + IN UINTN Address, + IN UINT16 AndData + ) +{ + return PciWrite16 (Address, (UINT16) (PciRead16 (Address) & AndData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit + value, followed a bitwise inclusive OR with another 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise inclusive OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciAndThenOr16 ( + IN UINTN Address, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciWrite16 (Address, (UINT16) ((PciRead16 (Address) & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 16-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciBitFieldRead16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead16 (PciRead16 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 16-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciBitFieldWrite16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ) +{ + return PciWrite16 ( + Address, + BitFieldWrite16 (PciRead16 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciBitFieldOr16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ) +{ + return PciWrite16 ( + Address, + BitFieldOr16 (PciRead16 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 16-bit register. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 16-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciBitFieldAnd16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ) +{ + return PciWrite16 ( + Address, + BitFieldAnd16 (PciRead16 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a + bitwise inclusive OR, and writes the result back to the bit field in the + 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise inclusive OR between the read result and + the value specified by AndData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciBitFieldAndThenOr16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciWrite16 ( + Address, + BitFieldAndThenOr16 (PciRead16 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a 32-bit PCI configuration register. + + Reads and returns the 32-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + + @return The value read from the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciRead32 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 3); + + return PeiPciLibPciCfg2ReadWorker (Address, EfiPeiPciCfgWidthUint32); +} + +/** + Writes a 32-bit PCI configuration register. + + Writes the 32-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciWrite32 ( + IN UINTN Address, + IN UINT32 Data + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address, 3); + + return PeiPciLibPciCfg2WriteWorker (Address, EfiPeiPciCfgWidthUint32, Data); +} + +/** + Performs a bitwise inclusive OR of a 32-bit PCI configuration register with + a 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciOr32 ( + IN UINTN Address, + IN UINT32 OrData + ) +{ + return PciWrite32 (Address, PciRead32 (Address) | OrData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit + value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 32-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciAnd32 ( + IN UINTN Address, + IN UINT32 AndData + ) +{ + return PciWrite32 (Address, PciRead32 (Address) & AndData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit + value, followed a bitwise inclusive OR with another 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise inclusive OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address Address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciAndThenOr32 ( + IN UINTN Address, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciWrite32 (Address, (PciRead32 (Address) & AndData) | OrData); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 32-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciBitFieldRead32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead32 (PciRead32 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 32-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param Value New value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciBitFieldWrite32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ) +{ + return PciWrite32 ( + Address, + BitFieldWrite32 (PciRead32 (Address), StartBit, EndBit, Value) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise inclusive OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciBitFieldOr32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ) +{ + return PciWrite32 ( + Address, + BitFieldOr32 (PciRead32 (Address), StartBit, EndBit, OrData) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 32-bit register. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 32-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciBitFieldAnd32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ) +{ + return PciWrite32 ( + Address, + BitFieldAnd32 (PciRead32 (Address), StartBit, EndBit, AndData) + ); +} + +/** + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a + bitwise inclusive OR, and writes the result back to the bit field in the + 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise inclusive OR between the read result and + the value specified by AndData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciBitFieldAndThenOr32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciWrite32 ( + Address, + BitFieldAndThenOr32 (PciRead32 (Address), StartBit, EndBit, AndData, OrData) + ); +} + +/** + Reads a range of PCI configuration registers into a caller supplied buffer. + + Reads the range of PCI configuration registers specified by StartAddress and + Size into the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be read. Size is + returned. When possible 32-bit PCI configuration read cycles are used to read + from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit + and 16-bit PCI configuration read cycles may be used at the beginning and the + end of the range. + + If StartAddress > 0x0FFFFFFF, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress Starting address that encodes the PCI Bus, Device, + Function and Register. + @param Size Size in bytes of the transfer. + @param Buffer Pointer to a buffer receiving the data read. + + @return Size + +**/ +UINTN +EFIAPI +PciReadBuffer ( + IN UINTN StartAddress, + IN UINTN Size, + OUT VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100); + + if (Size == 0) { + return Size; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & 1) != 0) { + // + // Read a byte if StartAddress is byte aligned + // + *(volatile UINT8 *)Buffer = PciRead8 (StartAddress); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8*)Buffer + 1; + } + + if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) { + // + // Read a word if StartAddress is word aligned + // + *(volatile UINT16 *)Buffer = PciRead16 (StartAddress); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Read as many double words as possible + // + *(volatile UINT32 *)Buffer = PciRead32 (StartAddress); + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32*)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Read the last remaining word if exist + // + *(volatile UINT16 *)Buffer = PciRead16 (StartAddress); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Read the last remaining byte if exist + // + *(volatile UINT8 *)Buffer = PciRead8 (StartAddress); + } + + return ReturnValue; +} + +/** + Copies the data in a caller supplied buffer to a specified range of PCI + configuration space. + + Writes the range of PCI configuration registers specified by StartAddress and + Size from the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be written. Size is + returned. When possible 32-bit PCI configuration write cycles are used to + write from StartAdress to StartAddress + Size. Due to alignment restrictions, + 8-bit and 16-bit PCI configuration write cycles may be used at the beginning + and the end of the range. + + If StartAddress > 0x0FFFFFFF, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress Starting address that encodes the PCI Bus, Device, + Function and Register. + @param Size Size in bytes of the transfer. + @param Buffer Pointer to a buffer containing the data to write. + + @return Size + +**/ +UINTN +EFIAPI +PciWriteBuffer ( + IN UINTN StartAddress, + IN UINTN Size, + IN VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100); + + if (Size == 0) { + return 0; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & 1) != 0) { + // + // Write a byte if StartAddress is byte aligned + // + PciWrite8 (StartAddress, *(UINT8*)Buffer); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8*)Buffer + 1; + } + + if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) { + // + // Write a word if StartAddress is word aligned + // + PciWrite16 (StartAddress, *(UINT16*)Buffer); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Write as many double words as possible + // + PciWrite32 (StartAddress, *(UINT32*)Buffer); + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32*)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Write the last remaining word if exist + // + PciWrite16 (StartAddress, *(UINT16*)Buffer); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16*)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Write the last remaining byte if exist + // + PciWrite8 (StartAddress, *(UINT8*)Buffer); + } + + return ReturnValue; +} diff --git a/MdePkg/Library/PeiPciLibPciCfg2/PeiPciLibPciCfg2.inf b/MdePkg/Library/PeiPciLibPciCfg2/PeiPciLibPciCfg2.inf new file mode 100644 index 0000000000..3fce912cf7 --- /dev/null +++ b/MdePkg/Library/PeiPciLibPciCfg2/PeiPciLibPciCfg2.inf @@ -0,0 +1,55 @@ +# @file +# Component description file for PCI Lib using PCI CFG2 PPI +# +# This library produces the APIs from the PCI Library and implements +# these APIs by calling into the EFI_PEI_PCI CFG2 PPI. One or more EFI_PEI_PCI CFG2 +# PPIs are typically produced by a chipset specific PEIM. This library only uses +# the first PPI found, so this library instance should only be used platforms +# with a single PCI segment. +# +# Copyright (c) 2007, Intel Corporation. +# +# All rights reserved. This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +# + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = PeiPciLibPciCfg2 + FILE_GUID = FA3AD693-D58A-4619-960B-8EE85C914870 + MODULE_TYPE = PEIM + VERSION_STRING = 1.0 + LIBRARY_CLASS = PciLib|PEIM + EDK_RELEASE_VERSION = 0x00020000 + EFI_SPECIFICATION_VERSION = 0x00020000 + + +# +# The following information is for reference only and not required by the build tools. +# +# VALID_ARCHITECTURES = IA32 X64 IPF EBC +# + +[Sources.common] + PciLib.c + + +[Packages] + MdePkg/MdePkg.dec + + +[LibraryClasses] + PeiServicesTablePointerLib + BaseLib + DebugLib + PeiServicesLib + +[Ppis] + gEfiPciCfg2PpiGuid # PPI ALWAYS_CONSUMED + -- cgit v1.2.3