From c0984d1ff28325a8f1c76e23a79141cbb12c3e4f Mon Sep 17 00:00:00 2001 From: Min M Xu Date: Fri, 3 Feb 2023 11:31:42 +0800 Subject: OvmfPkg: Refactor ProcessHobList BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243 ProcessHobList once was implemented in PlatformInitLib and it walks thru TdHob list and accept un-accepted memories. This patch moves the codes to SecTdxHelperLib and rename ProcessHobList as TdxHelperProcessTdHob After TdxHelperProcessTdHob is introduced, below changes are applied: - Call TdxHelperProcessTdHob instead of ProcessHobList in SecMain.c (in both OvmfPkgX64/Sec and IntelTdx/Sec). - Delete the duplicated codes in PlatformInitLib Cc: Erdem Aktas Cc: James Bottomley Cc: Jiewen Yao Cc: Gerd Hoffmann Cc: Tom Lendacky Cc: Michael Roth Acked-by: Gerd Hoffmann Reviewed-by: Jiewen Yao Signed-off-by: Min Xu --- OvmfPkg/IntelTdx/Sec/SecMain.c | 4 +- OvmfPkg/IntelTdx/TdxHelperLib/SecTdxHelper.c | 754 ++++++++++++++++++++++++++- 2 files changed, 755 insertions(+), 3 deletions(-) (limited to 'OvmfPkg/IntelTdx') diff --git a/OvmfPkg/IntelTdx/Sec/SecMain.c b/OvmfPkg/IntelTdx/Sec/SecMain.c index ab01ec9ab1..41bd5c66ba 100644 --- a/OvmfPkg/IntelTdx/Sec/SecMain.c +++ b/OvmfPkg/IntelTdx/Sec/SecMain.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -67,7 +67,7 @@ SecCoreStartupWithStack ( // first so that the memory is accepted. Otherwise access to the unaccepted // memory will trigger tripple fault. // - if (ProcessTdxHobList () != EFI_SUCCESS) { + if (TdxHelperProcessTdHob () != EFI_SUCCESS) { CpuDeadLoop (); } } diff --git a/OvmfPkg/IntelTdx/TdxHelperLib/SecTdxHelper.c b/OvmfPkg/IntelTdx/TdxHelperLib/SecTdxHelper.c index 1929093f91..3372cee2f7 100644 --- a/OvmfPkg/IntelTdx/TdxHelperLib/SecTdxHelper.c +++ b/OvmfPkg/IntelTdx/TdxHelperLib/SecTdxHelper.c @@ -17,11 +17,20 @@ #include #include #include +#include +#include #include #include #include #include +#define ALIGNED_2MB_MASK 0x1fffff +#define MEGABYTE_SHIFT 20 + +#define ACCEPT_CHUNK_SIZE SIZE_32MB +#define AP_STACK_SIZE SIZE_16KB +#define APS_STACK_SIZE(CpusNum) (ALIGN_VALUE(CpusNum*AP_STACK_SIZE, SIZE_2MB)) + /** Build the GuidHob for tdx measurements which were done in SEC phase. The measurement values are stored in WorkArea. @@ -34,6 +43,720 @@ InternalBuildGuidHobForTdxMeasurement ( VOID ); +/** + This function will be called to accept pages. Only BSP accepts pages. + + TDCALL(ACCEPT_PAGE) supports the accept page size of 4k and 2M. To + simplify the implementation, the Memory to be accpeted is splitted + into 3 parts: + ----------------- <-- StartAddress1 (not 2M aligned) + | part 1 | Length1 < 2M + |---------------| <-- StartAddress2 (2M aligned) + | | Length2 = Integer multiples of 2M + | part 2 | + | | + |---------------| <-- StartAddress3 + | part 3 | Length3 < 2M + |---------------| + + @param[in] PhysicalAddress Start physical adress + @param[in] PhysicalEnd End physical address + + @retval EFI_SUCCESS Accept memory successfully + @retval Others Other errors as indicated +**/ +STATIC +EFI_STATUS +EFIAPI +BspAcceptMemoryResourceRange ( + IN EFI_PHYSICAL_ADDRESS PhysicalAddress, + IN EFI_PHYSICAL_ADDRESS PhysicalEnd + ) +{ + EFI_STATUS Status; + UINT32 AcceptPageSize; + UINT64 StartAddress1; + UINT64 StartAddress2; + UINT64 StartAddress3; + UINT64 TotalLength; + UINT64 Length1; + UINT64 Length2; + UINT64 Length3; + UINT64 Pages; + + AcceptPageSize = FixedPcdGet32 (PcdTdxAcceptPageSize); + TotalLength = PhysicalEnd - PhysicalAddress; + StartAddress1 = 0; + StartAddress2 = 0; + StartAddress3 = 0; + Length1 = 0; + Length2 = 0; + Length3 = 0; + + if (TotalLength == 0) { + return EFI_SUCCESS; + } + + if (ALIGN_VALUE (PhysicalAddress, SIZE_2MB) != PhysicalAddress) { + StartAddress1 = PhysicalAddress; + Length1 = ALIGN_VALUE (PhysicalAddress, SIZE_2MB) - PhysicalAddress; + if (Length1 >= TotalLength) { + Length1 = TotalLength; + } + + PhysicalAddress += Length1; + TotalLength -= Length1; + } + + if (TotalLength > SIZE_2MB) { + StartAddress2 = PhysicalAddress; + Length2 = TotalLength & ~(UINT64)ALIGNED_2MB_MASK; + PhysicalAddress += Length2; + TotalLength -= Length2; + } + + if (TotalLength) { + StartAddress3 = PhysicalAddress; + Length3 = TotalLength; + } + + Status = EFI_SUCCESS; + if (Length1 > 0) { + Pages = Length1 / SIZE_4KB; + Status = TdAcceptPages (StartAddress1, Pages, SIZE_4KB); + if (EFI_ERROR (Status)) { + return Status; + } + } + + if (Length2 > 0) { + Pages = Length2 / AcceptPageSize; + Status = TdAcceptPages (StartAddress2, Pages, AcceptPageSize); + if (EFI_ERROR (Status)) { + return Status; + } + } + + if (Length3 > 0) { + Pages = Length3 / SIZE_4KB; + Status = TdAcceptPages (StartAddress3, Pages, SIZE_4KB); + ASSERT (!EFI_ERROR (Status)); + if (EFI_ERROR (Status)) { + return Status; + } + } + + return Status; +} + +/** + * This function is called by BSP and APs to accept memory. + * Note: + * The input PhysicalStart/PhysicalEnd indicates the whole memory region + * to be accepted. BSP or AP only accepts one piece in the whole memory region. + * + * @param CpuIndex vCPU index + * @param CpusNum Total vCPU number of a Tdx guest + * @param PhysicalStart Start address of a memory region which is to be accepted + * @param PhysicalEnd End address of a memory region which is to be accepted + * + * @retval EFI_SUCCESS Successfully accept the memory + * @retval Other Other errors as indicated + */ +STATIC +EFI_STATUS +EFIAPI +BspApAcceptMemoryResourceRange ( + UINT32 CpuIndex, + UINT32 CpusNum, + EFI_PHYSICAL_ADDRESS PhysicalStart, + EFI_PHYSICAL_ADDRESS PhysicalEnd + ) +{ + UINT64 Status; + UINT64 Pages; + UINT64 Stride; + UINT64 AcceptPageSize; + EFI_PHYSICAL_ADDRESS PhysicalAddress; + + AcceptPageSize = (UINT64)(UINTN)FixedPcdGet32 (PcdTdxAcceptPageSize); + + Status = EFI_SUCCESS; + Stride = (UINTN)CpusNum * ACCEPT_CHUNK_SIZE; + PhysicalAddress = PhysicalStart + ACCEPT_CHUNK_SIZE * (UINTN)CpuIndex; + + while (!EFI_ERROR (Status) && PhysicalAddress < PhysicalEnd) { + Pages = MIN (ACCEPT_CHUNK_SIZE, PhysicalEnd - PhysicalAddress) / AcceptPageSize; + Status = TdAcceptPages (PhysicalAddress, Pages, (UINT32)(UINTN)AcceptPageSize); + ASSERT (!EFI_ERROR (Status)); + PhysicalAddress += Stride; + } + + return EFI_SUCCESS; +} + +/** + * This function is called by APs to accept memory. + * + * @param CpuIndex vCPU index of an AP + * @param PhysicalStart Start address of a memory region which is to be accepted + * @param PhysicalEnd End address of a memory region which is to be accepted + * + * @retval EFI_SUCCESS Successfully accept the memory + * @retval Others Other errors as indicated + */ +STATIC +EFI_STATUS +EFIAPI +ApAcceptMemoryResourceRange ( + UINT32 CpuIndex, + EFI_PHYSICAL_ADDRESS PhysicalStart, + EFI_PHYSICAL_ADDRESS PhysicalEnd + ) +{ + UINT64 Status; + TD_RETURN_DATA TdReturnData; + + Status = TdCall (TDCALL_TDINFO, 0, 0, 0, &TdReturnData); + if (Status != TDX_EXIT_REASON_SUCCESS) { + ASSERT (FALSE); + return EFI_ABORTED; + } + + if ((CpuIndex == 0) || (CpuIndex >= TdReturnData.TdInfo.NumVcpus)) { + ASSERT (FALSE); + return EFI_ABORTED; + } + + return BspApAcceptMemoryResourceRange (CpuIndex, TdReturnData.TdInfo.NumVcpus, PhysicalStart, PhysicalEnd); +} + +/** + * This function is called by BSP. It coordinates BSP/APs to accept memory together. + * + * @param PhysicalStart Start address of a memory region which is to be accepted + * @param PhysicalEnd End address of a memory region which is to be accepted + * @param APsStackAddress APs stack address + * @param CpusNum Total vCPU number of the Tdx guest + * + * @retval EFI_SUCCESS Successfully accept the memory + * @retval Others Other errors as indicated + */ +STATIC +EFI_STATUS +EFIAPI +MpAcceptMemoryResourceRange ( + IN EFI_PHYSICAL_ADDRESS PhysicalStart, + IN EFI_PHYSICAL_ADDRESS PhysicalEnd, + IN OUT EFI_PHYSICAL_ADDRESS APsStackAddress, + IN UINT32 CpusNum + ) +{ + UINT64 Length; + EFI_STATUS Status; + + Length = PhysicalEnd - PhysicalStart; + + DEBUG ((DEBUG_INFO, "MpAccept : 0x%llx - 0x%llx (0x%llx)\n", PhysicalStart, PhysicalEnd, Length)); + + if (Length == 0) { + return EFI_SUCCESS; + } + + // + // The start address is not 2M aligned. BSP first accept the part which is not 2M aligned. + // + if (ALIGN_VALUE (PhysicalStart, SIZE_2MB) != PhysicalStart) { + Length = MIN (ALIGN_VALUE (PhysicalStart, SIZE_2MB) - PhysicalStart, Length); + Status = BspAcceptMemoryResourceRange (PhysicalStart, PhysicalStart + Length); + ASSERT (Status == EFI_SUCCESS); + + PhysicalStart += Length; + Length = PhysicalEnd - PhysicalStart; + } + + if (Length == 0) { + return EFI_SUCCESS; + } + + // + // BSP will accept the memory by itself if the memory is not big enough compared with a chunk. + // + if (Length <= ACCEPT_CHUNK_SIZE) { + return BspAcceptMemoryResourceRange (PhysicalStart, PhysicalEnd); + } + + // + // Now APs are asked to accept the memory together. + // + MpSerializeStart (); + + MpSendWakeupCommand ( + MpProtectedModeWakeupCommandAcceptPages, + (UINT64)(UINTN)ApAcceptMemoryResourceRange, + PhysicalStart, + PhysicalEnd, + APsStackAddress, + AP_STACK_SIZE + ); + + // + // Now BSP does its job. + // + BspApAcceptMemoryResourceRange (0, CpusNum, PhysicalStart, PhysicalEnd); + + MpSerializeEnd (); + + return EFI_SUCCESS; +} + +/** + BSP accept a small piece of memory which will be used as APs stack. + + @param[in] VmmHobList The Hoblist pass the firmware + @param[in] APsStackSize APs stack size + @param[out] PhysicalAddressEnd The physical end address of accepted memory in phase-1 + + @retval EFI_SUCCESS Process the HobList successfully + @retval Others Other errors as indicated +**/ +STATIC +EFI_STATUS +EFIAPI +AcceptMemoryForAPsStack ( + IN CONST VOID *VmmHobList, + IN UINT32 APsStackSize, + OUT EFI_PHYSICAL_ADDRESS *PhysicalAddressEnd + ) +{ + EFI_STATUS Status; + EFI_PEI_HOB_POINTERS Hob; + EFI_PHYSICAL_ADDRESS PhysicalEnd; + EFI_PHYSICAL_ADDRESS PhysicalStart; + UINT64 ResourceLength; + BOOLEAN MemoryRegionFound; + + ASSERT (VmmHobList != NULL); + + Status = EFI_SUCCESS; + Hob.Raw = (UINT8 *)VmmHobList; + MemoryRegionFound = FALSE; + + DEBUG ((DEBUG_INFO, "AcceptMemoryForAPsStack with APsStackSize=0x%x\n", APsStackSize)); + + // + // Parse the HOB list until end of list or matching type is found. + // + while (!END_OF_HOB_LIST (Hob) && !MemoryRegionFound) { + if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) { + DEBUG ((DEBUG_INFO, "\nResourceType: 0x%x\n", Hob.ResourceDescriptor->ResourceType)); + + if (Hob.ResourceDescriptor->ResourceType == BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED) { + ResourceLength = Hob.ResourceDescriptor->ResourceLength; + PhysicalStart = Hob.ResourceDescriptor->PhysicalStart; + PhysicalEnd = PhysicalStart + ResourceLength; + + DEBUG ((DEBUG_INFO, "ResourceAttribute: 0x%x\n", Hob.ResourceDescriptor->ResourceAttribute)); + DEBUG ((DEBUG_INFO, "PhysicalStart: 0x%llx\n", PhysicalStart)); + DEBUG ((DEBUG_INFO, "ResourceLength: 0x%llx\n", ResourceLength)); + DEBUG ((DEBUG_INFO, "Owner: %g\n\n", &Hob.ResourceDescriptor->Owner)); + + if (ResourceLength >= APsStackSize) { + MemoryRegionFound = TRUE; + if (ResourceLength > ACCEPT_CHUNK_SIZE) { + PhysicalEnd = Hob.ResourceDescriptor->PhysicalStart + APsStackSize; + } + } + + Status = BspAcceptMemoryResourceRange ( + Hob.ResourceDescriptor->PhysicalStart, + PhysicalEnd + ); + if (EFI_ERROR (Status)) { + break; + } + } + } + + Hob.Raw = GET_NEXT_HOB (Hob); + } + + ASSERT (MemoryRegionFound); + *PhysicalAddressEnd = PhysicalEnd; + + return Status; +} + +/** + BSP and APs work togeter to accept memory which is under the address of 4G. + + @param[in] VmmHobList The Hoblist pass the firmware + @param[in] CpusNum Number of vCPUs + @param[in] APsStackStartAddres Start address of APs stack + @param[in] PhysicalAddressStart Start physical address which to be accepted + + @retval EFI_SUCCESS Process the HobList successfully + @retval Others Other errors as indicated +**/ +STATIC +EFI_STATUS +EFIAPI +AcceptMemory ( + IN CONST VOID *VmmHobList, + IN UINT32 CpusNum, + IN EFI_PHYSICAL_ADDRESS APsStackStartAddress, + IN EFI_PHYSICAL_ADDRESS PhysicalAddressStart + ) +{ + EFI_STATUS Status; + EFI_PEI_HOB_POINTERS Hob; + EFI_PHYSICAL_ADDRESS PhysicalStart; + EFI_PHYSICAL_ADDRESS PhysicalEnd; + EFI_PHYSICAL_ADDRESS AcceptMemoryEndAddress; + + Status = EFI_SUCCESS; + AcceptMemoryEndAddress = BASE_4GB; + + ASSERT (VmmHobList != NULL); + Hob.Raw = (UINT8 *)VmmHobList; + + DEBUG ((DEBUG_INFO, "AcceptMemory under address of 4G\n")); + + // + // Parse the HOB list until end of list or matching type is found. + // + while (!END_OF_HOB_LIST (Hob)) { + if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) { + if (Hob.ResourceDescriptor->ResourceType == BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED) { + PhysicalStart = Hob.ResourceDescriptor->PhysicalStart; + PhysicalEnd = PhysicalStart + Hob.ResourceDescriptor->ResourceLength; + + if (PhysicalEnd <= PhysicalAddressStart) { + // this memory region has been accepted. Skipped it. + Hob.Raw = GET_NEXT_HOB (Hob); + continue; + } + + if (PhysicalStart >= AcceptMemoryEndAddress) { + // this memory region is not to be accepted. And we're done. + break; + } + + if (PhysicalStart >= PhysicalAddressStart) { + // this memory region has not been acceted. + } else if ((PhysicalStart < PhysicalAddressStart) && (PhysicalEnd > PhysicalAddressStart)) { + // part of the memory region has been accepted. + PhysicalStart = PhysicalAddressStart; + } + + // then compare the PhysicalEnd with AcceptMemoryEndAddress + if (PhysicalEnd >= AcceptMemoryEndAddress) { + PhysicalEnd = AcceptMemoryEndAddress; + } + + DEBUG ((DEBUG_INFO, "ResourceAttribute: 0x%x\n", Hob.ResourceDescriptor->ResourceAttribute)); + DEBUG ((DEBUG_INFO, "PhysicalStart: 0x%llx\n", Hob.ResourceDescriptor->PhysicalStart)); + DEBUG ((DEBUG_INFO, "ResourceLength: 0x%llx\n", Hob.ResourceDescriptor->ResourceLength)); + DEBUG ((DEBUG_INFO, "Owner: %g\n\n", &Hob.ResourceDescriptor->Owner)); + + // Now we're ready to accept memory [PhysicalStart, PhysicalEnd) + if (CpusNum == 1) { + Status = BspAcceptMemoryResourceRange (PhysicalStart, PhysicalEnd); + } else { + Status = MpAcceptMemoryResourceRange ( + PhysicalStart, + PhysicalEnd, + APsStackStartAddress, + CpusNum + ); + } + + if (EFI_ERROR (Status)) { + ASSERT (FALSE); + break; + } + + if (PhysicalEnd == AcceptMemoryEndAddress) { + break; + } + } + } + + Hob.Raw = GET_NEXT_HOB (Hob); + } + + return Status; +} + +/** + Check the value whether in the valid list. + + @param[in] Value A value + @param[in] ValidList A pointer to valid list + @param[in] ValidListLength Length of valid list + + @retval TRUE The value is in valid list. + @retval FALSE The value is not in valid list. + +**/ +STATIC +BOOLEAN +EFIAPI +IsInValidList ( + IN UINT32 Value, + IN UINT32 *ValidList, + IN UINT32 ValidListLength + ) +{ + UINT32 index; + + if (ValidList == NULL) { + return FALSE; + } + + for (index = 0; index < ValidListLength; index++) { + if (ValidList[index] == Value) { + return TRUE; + } + } + + return FALSE; +} + +/** + Check the integrity of VMM Hob List. + + @param[in] VmmHobList A pointer to Hob List + + @retval TRUE The Hob List is valid. + @retval FALSE The Hob List is invalid. + +**/ +STATIC +BOOLEAN +EFIAPI +ValidateHobList ( + IN CONST VOID *VmmHobList + ) +{ + EFI_PEI_HOB_POINTERS Hob; + UINT32 EFI_BOOT_MODE_LIST[] = { + BOOT_WITH_FULL_CONFIGURATION, + BOOT_WITH_MINIMAL_CONFIGURATION, + BOOT_ASSUMING_NO_CONFIGURATION_CHANGES, + BOOT_WITH_FULL_CONFIGURATION_PLUS_DIAGNOSTICS, + BOOT_WITH_DEFAULT_SETTINGS, + BOOT_ON_S4_RESUME, + BOOT_ON_S5_RESUME, + BOOT_WITH_MFG_MODE_SETTINGS, + BOOT_ON_S2_RESUME, + BOOT_ON_S3_RESUME, + BOOT_ON_FLASH_UPDATE, + BOOT_IN_RECOVERY_MODE + }; + + UINT32 EFI_RESOURCE_TYPE_LIST[] = { + EFI_RESOURCE_SYSTEM_MEMORY, + EFI_RESOURCE_MEMORY_MAPPED_IO, + EFI_RESOURCE_IO, + EFI_RESOURCE_FIRMWARE_DEVICE, + EFI_RESOURCE_MEMORY_MAPPED_IO_PORT, + EFI_RESOURCE_MEMORY_RESERVED, + EFI_RESOURCE_IO_RESERVED, + BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED + }; + + if (VmmHobList == NULL) { + DEBUG ((DEBUG_ERROR, "HOB: HOB data pointer is NULL\n")); + return FALSE; + } + + Hob.Raw = (UINT8 *)VmmHobList; + + // + // Parse the HOB list until end of list or matching type is found. + // + while (!END_OF_HOB_LIST (Hob)) { + if (Hob.Header->Reserved != (UINT32)0) { + DEBUG ((DEBUG_ERROR, "HOB: Hob header Reserved filed should be zero\n")); + return FALSE; + } + + if (Hob.Header->HobLength == 0) { + DEBUG ((DEBUG_ERROR, "HOB: Hob header LEANGTH should not be zero\n")); + return FALSE; + } + + switch (Hob.Header->HobType) { + case EFI_HOB_TYPE_HANDOFF: + if (Hob.Header->HobLength != sizeof (EFI_HOB_HANDOFF_INFO_TABLE)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_HANDOFF)); + return FALSE; + } + + if (IsInValidList (Hob.HandoffInformationTable->BootMode, EFI_BOOT_MODE_LIST, ARRAY_SIZE (EFI_BOOT_MODE_LIST)) == FALSE) { + DEBUG ((DEBUG_ERROR, "HOB: Unknow HandoffInformationTable BootMode type. Type: 0x%08x\n", Hob.HandoffInformationTable->BootMode)); + return FALSE; + } + + if ((Hob.HandoffInformationTable->EfiFreeMemoryTop % 4096) != 0) { + DEBUG ((DEBUG_ERROR, "HOB: HandoffInformationTable EfiFreeMemoryTop address must be 4-KB aligned to meet page restrictions of UEFI.\ + Address: 0x%016lx\n", Hob.HandoffInformationTable->EfiFreeMemoryTop)); + return FALSE; + } + + break; + + case EFI_HOB_TYPE_RESOURCE_DESCRIPTOR: + if (Hob.Header->HobLength != sizeof (EFI_HOB_RESOURCE_DESCRIPTOR)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_RESOURCE_DESCRIPTOR)); + return FALSE; + } + + if (IsInValidList (Hob.ResourceDescriptor->ResourceType, EFI_RESOURCE_TYPE_LIST, ARRAY_SIZE (EFI_RESOURCE_TYPE_LIST)) == FALSE) { + DEBUG ((DEBUG_ERROR, "HOB: Unknow ResourceDescriptor ResourceType type. Type: 0x%08x\n", Hob.ResourceDescriptor->ResourceType)); + return FALSE; + } + + if ((Hob.ResourceDescriptor->ResourceAttribute & (~(EFI_RESOURCE_ATTRIBUTE_PRESENT | + EFI_RESOURCE_ATTRIBUTE_INITIALIZED | + EFI_RESOURCE_ATTRIBUTE_TESTED | + EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED | + EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED | + EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED | + EFI_RESOURCE_ATTRIBUTE_PERSISTENT | + EFI_RESOURCE_ATTRIBUTE_SINGLE_BIT_ECC | + EFI_RESOURCE_ATTRIBUTE_MULTIPLE_BIT_ECC | + EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_1 | + EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_2 | + EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE | + EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE | + EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE | + EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE | + EFI_RESOURCE_ATTRIBUTE_16_BIT_IO | + EFI_RESOURCE_ATTRIBUTE_32_BIT_IO | + EFI_RESOURCE_ATTRIBUTE_64_BIT_IO | + EFI_RESOURCE_ATTRIBUTE_UNCACHED_EXPORTED | + EFI_RESOURCE_ATTRIBUTE_READ_PROTECTABLE | + EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTABLE | + EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTABLE | + EFI_RESOURCE_ATTRIBUTE_PERSISTABLE | + EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTED | + EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE | + EFI_RESOURCE_ATTRIBUTE_MORE_RELIABLE))) != 0) + { + DEBUG ((DEBUG_ERROR, "HOB: Unknow ResourceDescriptor ResourceAttribute type. Type: 0x%08x\n", Hob.ResourceDescriptor->ResourceAttribute)); + return FALSE; + } + + break; + + // EFI_HOB_GUID_TYPE is variable length data, so skip check + case EFI_HOB_TYPE_GUID_EXTENSION: + break; + + case EFI_HOB_TYPE_FV: + if (Hob.Header->HobLength != sizeof (EFI_HOB_FIRMWARE_VOLUME)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_FV)); + return FALSE; + } + + break; + + case EFI_HOB_TYPE_FV2: + if (Hob.Header->HobLength != sizeof (EFI_HOB_FIRMWARE_VOLUME2)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_FV2)); + return FALSE; + } + + break; + + case EFI_HOB_TYPE_FV3: + if (Hob.Header->HobLength != sizeof (EFI_HOB_FIRMWARE_VOLUME3)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_FV3)); + return FALSE; + } + + break; + + case EFI_HOB_TYPE_CPU: + if (Hob.Header->HobLength != sizeof (EFI_HOB_CPU)) { + DEBUG ((DEBUG_ERROR, "HOB: Hob length is not equal corresponding hob structure. Type: 0x%04x\n", EFI_HOB_TYPE_CPU)); + return FALSE; + } + + for (UINT32 index = 0; index < 6; index++) { + if (Hob.Cpu->Reserved[index] != 0) { + DEBUG ((DEBUG_ERROR, "HOB: Cpu Reserved field will always be set to zero.\n")); + return FALSE; + } + } + + break; + + default: + DEBUG ((DEBUG_ERROR, "HOB: Hob type is not know. Type: 0x%04x\n", Hob.Header->HobType)); + return FALSE; + } + + // Get next HOB + Hob.Raw = (UINT8 *)(Hob.Raw + Hob.Header->HobLength); + } + + return TRUE; +} + +/** + Processing the incoming HobList for the TDX + + Firmware must parse list, and accept the pages of memory before their can be + use by the guest. + + @param[in] VmmHobList The Hoblist pass the firmware + + @retval EFI_SUCCESS Process the HobList successfully + @retval Others Other errors as indicated + +**/ +STATIC +EFI_STATUS +EFIAPI +ProcessHobList ( + IN CONST VOID *VmmHobList + ) +{ + EFI_STATUS Status; + UINT32 CpusNum; + EFI_PHYSICAL_ADDRESS PhysicalEnd; + EFI_PHYSICAL_ADDRESS APsStackStartAddress; + + CpusNum = GetCpusNum (); + + // + // If there are mutli-vCPU in a TDX guest, accept memory is split into 2 phases. + // Phase-1 accepts a small piece of memory by BSP. This piece of memory + // is used to setup AP's stack. + // After that phase-2 accepts a big piece of memory by BSP/APs. + // + // TDVF supports 4K and 2M accept-page-size. The memory which can be accpeted + // in 2M accept-page-size must be 2M aligned and multiple 2M. So we align + // APsStackSize to 2M size aligned. + // + if (CpusNum > 1) { + Status = AcceptMemoryForAPsStack (VmmHobList, APS_STACK_SIZE (CpusNum), &PhysicalEnd); + ASSERT (Status == EFI_SUCCESS); + APsStackStartAddress = PhysicalEnd - APS_STACK_SIZE (CpusNum); + } else { + PhysicalEnd = 0; + APsStackStartAddress = 0; + } + + Status = AcceptMemory (VmmHobList, CpusNum, APsStackStartAddress, PhysicalEnd); + ASSERT (Status == EFI_SUCCESS); + + return Status; +} + /** In Tdx guest, some information need to be passed from host VMM to guest firmware. For example, the memory resource, etc. These information are @@ -49,7 +772,36 @@ TdxHelperProcessTdHob ( VOID ) { - return EFI_UNSUPPORTED; + EFI_STATUS Status; + VOID *TdHob; + TD_RETURN_DATA TdReturnData; + + TdHob = (VOID *)(UINTN)FixedPcdGet32 (PcdOvmfSecGhcbBase); + Status = TdCall (TDCALL_TDINFO, 0, 0, 0, &TdReturnData); + if (EFI_ERROR (Status)) { + return Status; + } + + DEBUG (( + DEBUG_INFO, + "Intel Tdx Started with (GPAW: %d, Cpus: %d)\n", + TdReturnData.TdInfo.Gpaw, + TdReturnData.TdInfo.NumVcpus + )); + + // + // Validate HobList + // + if (ValidateHobList (TdHob) == FALSE) { + return EFI_INVALID_PARAMETER; + } + + // + // Process Hoblist to accept memory + // + Status = ProcessHobList (TdHob); + + return Status; } /** -- cgit v1.2.3