From 957649a77da7c834750053ff479e274f1c94999b Mon Sep 17 00:00:00 2001 From: Michael Kinney Date: Thu, 21 Jan 2016 19:30:36 +0000 Subject: QuarkPlatformPkg: Add Tpm12DeviceLib instance for Infineon I2C TPM Add Tpm12DeviceLib instance for Infineon I2C TPM Cc: Kelly Steele Cc: Jiewen Yao Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney Reviewed-by: Kelly Steele Reviewed-by: Jiewen Yao git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19731 6f19259b-4bc3-4df7-8a09-765794883524 --- .../Library/Tpm12DeviceLibInfineonI2c/TisPc.c | 618 +++++++++++++++++++++ .../Tpm12DeviceLibInfineonI2c.inf | 44 ++ .../Tpm12DeviceLibInfineonI2c.uni | 21 + 3 files changed, 683 insertions(+) create mode 100644 QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c create mode 100644 QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf create mode 100644 QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni (limited to 'QuarkPlatformPkg') diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c new file mode 100644 index 0000000000..882136540d --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/TisPc.c @@ -0,0 +1,618 @@ +/** @file + Basic TIS (TPM Interface Specification) functions for Infineon I2C TPM. + + Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include +#include +#include +#include +#include +#include + +// +// Default TPM (Infineon SLB9645) I2C Slave Device Address on Crosshill board. +// +#define TPM_I2C_SLAVE_DEVICE_ADDRESS 0x20 + +// +// Default Infineon SLB9645 TPM I2C mapped registers (SLB9645 I2C Comm. Protocol Application Note). +// +#define INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT 0x0 +#define INFINEON_TPM_STS_0_ADDRESS_DEFAULT 0x01 +#define INFINEON_TPM_BURST0_COUNT_0_DEFAULT 0x02 +#define INFINEON_TPM_BURST1_COUNT_0_DEFAULT 0x03 +#define INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT 0x05 +#define INFINEON_TPM_DID_VID_0_DEFAULT 0x09 + +// +// Max. retry count for read transfers (as recommended by Infineon). +// +#define READ_RETRY 3 + +// +// Guard time of 250us between I2C read and next I2C write transfer (as recommended by Infineon). +// +#define GUARD_TIME 250 + +// +// Define bits of ACCESS and STATUS registers +// + +/// +/// This bit is a 1 to indicate that the other bits in this register are valid. +/// +#define TIS_PC_VALID BIT7 +/// +/// Indicate that this locality is active. +/// +#define TIS_PC_ACC_ACTIVE BIT5 +/// +/// Set to 1 to indicate that this locality had the TPM taken away while +/// this locality had the TIS_PC_ACC_ACTIVE bit set. +/// +#define TIS_PC_ACC_SEIZED BIT4 +/// +/// Set to 1 to indicate that TPM MUST reset the +/// TIS_PC_ACC_ACTIVE bit and remove ownership for localities less than the +/// locality that is writing this bit. +/// +#define TIS_PC_ACC_SEIZE BIT3 +/// +/// When this bit is 1, another locality is requesting usage of the TPM. +/// +#define TIS_PC_ACC_PENDIND BIT2 +/// +/// Set to 1 to indicate that this locality is requesting to use TPM. +/// +#define TIS_PC_ACC_RQUUSE BIT1 +/// +/// A value of 1 indicates that a T/OS has not been established on the platform +/// +#define TIS_PC_ACC_ESTABLISH BIT0 + +/// +/// When this bit is 1, TPM is in the Ready state, +/// indicating it is ready to receive a new command. +/// +#define TIS_PC_STS_READY BIT6 +/// +/// Write a 1 to this bit to cause the TPM to execute that command. +/// +#define TIS_PC_STS_GO BIT5 +/// +/// This bit indicates that the TPM has data available as a response. +/// +#define TIS_PC_STS_DATA BIT4 +/// +/// The TPM sets this bit to a value of 1 when it expects another byte of data for a command. +/// +#define TIS_PC_STS_EXPECT BIT3 +/// +/// Writes a 1 to this bit to force the TPM to re-send the response. +/// +#define TIS_PC_STS_RETRY BIT1 + +// +// Default TimeOut values in microseconds +// +#define TIS_TIMEOUT_A (750 * 1000) // 750ms +#define TIS_TIMEOUT_B (2000 * 1000) // 2s +#define TIS_TIMEOUT_C (750 * 1000) // 750ms +#define TIS_TIMEOUT_D (750 * 1000) // 750ms + +// +// Global variable to indicate if TPM I2C Read Transfer has previously occurred. +// NOTE: Given the GUARD_TIME requirement (TpmAccess.h), if this library loaded +// by PEI Drivers this global variable required to be resident in R/W memory +// +BOOLEAN mI2CPrevReadTransfer = FALSE; + +/** + Writes single byte data to TPM specified by I2C register address. + + @param[in] TpmAddress The register to write. + @param[in] Data The data to write to the register. + +**/ +VOID +TpmWriteByte ( + IN UINTN TpmAddress, + IN UINT8 Data + ) +{ + EFI_STATUS Status; + UINTN WriteLength; + UINT8 WriteData[2]; + EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr; + + // + // Setup I2C Slave device address and address mode (7-bit). + // + I2CDeviceAddr.I2CDeviceAddress = TPM_I2C_SLAVE_DEVICE_ADDRESS; + + // + // As recommended by Infineon (SLB9645 I2C Communication protocol application + // note revision 1.0) wait 250 microseconds between a read and a write transfer. + // + if (mI2CPrevReadTransfer) { + MicroSecondDelay (GUARD_TIME); + } + + // + // Write to TPM register. + // + WriteLength = 2; + WriteData[0] = (UINT8)TpmAddress; + WriteData[1] = Data; + + Status = I2cWriteMultipleByte ( + I2CDeviceAddr, + EfiI2CSevenBitAddrMode, + &WriteLength, + &WriteData + ); + if (EFI_ERROR(Status)) { + DEBUG ((EFI_D_ERROR, "TpmWriteByte(): I2C Write to TPM address %0x failed (%r)\n", TpmAddress, Status)); + ASSERT (FALSE); // Writes to TPM should always succeed. + } + + mI2CPrevReadTransfer = FALSE; +} + +/** + Reads single byte data from TPM specified by I2C register address. + + Due to stability issues when using I2C combined write/read transfers (with + RESTART) to TPM (specifically read from status register), a single write is + performed followed by single read (with STOP condition in between). + + @param[in] TpmAddress Address of register to read. + + @return The value register read. + +**/ +UINT8 +TpmReadByte ( + IN UINTN TpmAddress + ) +{ + UINT8 Data[1]; + UINT8 ReadData; + UINT8 ReadCount; + + EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr; + EFI_I2C_ADDR_MODE I2CAddrMode; + + EFI_STATUS Status; + + Status = EFI_SUCCESS; + ReadData = 0xFF; + ReadCount = 0; + + // + // Locate I2C protocol for TPM I2C access. + // + I2CDeviceAddr.I2CDeviceAddress = TPM_I2C_SLAVE_DEVICE_ADDRESS; + I2CAddrMode = EfiI2CSevenBitAddrMode; + + // + // As recommended by Infineon (SLB9645 I2C Communication protocol application + // note revision 1.0) retry up to 3 times if TPM status, access or burst count + // registers return 0xFF. + // + while ((ReadData == 0xFF) && (ReadCount < READ_RETRY)) { + // + // As recommended by Infineon (SLB9645 I2C Communication protocol application + // note revision 1.0) wait 250 microseconds between a read and a write transfer. + // + if (mI2CPrevReadTransfer) { + MicroSecondDelay (GUARD_TIME); + } + + // + // Write address to TPM. + // + Data[0] = (UINT8)TpmAddress; + Status = I2cWriteByte ( + I2CDeviceAddr, + I2CAddrMode, + &Data + ); + + if (EFI_ERROR(Status)) { + DEBUG ((EFI_D_INFO, "TpmReadByte(): write to TPM address %0x failed (%r)\n", TpmAddress, Status)); + } + + mI2CPrevReadTransfer = FALSE; + + // + // Read data from TPM. + // + Data[0] = (UINT8)TpmAddress; + Status = I2cReadByte ( + I2CDeviceAddr, + I2CAddrMode, + &Data + ); + + if (EFI_ERROR(Status)) { + DEBUG ((EFI_D_INFO, "TpmReadByte(): read from TPM address %0x failed (%r)\n", TpmAddress, Status)); + ReadData = 0xFF; + } else { + ReadData = Data[0]; + } + + // + // Only need to retry 3 times for TPM status, access, and burst count registers. + // If read transfer is to TPM Data FIFO, do not retry, exit loop. + // + if (TpmAddress == INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT) { + ReadCount = READ_RETRY; + } else { + ReadCount++; + } + + mI2CPrevReadTransfer = TRUE; + } + + if (EFI_ERROR(Status)) { + // + // Only reads to access register allowed to fail. + // + if (TpmAddress != INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT) { + DEBUG ((EFI_D_ERROR, "TpmReadByte(): read from TPM address %0x failed\n", TpmAddress)); + ASSERT_EFI_ERROR (Status); + } + } + return ReadData; +} + +/** + Check whether the value of a TPM chip register satisfies the input BIT setting. + + @param[in] Register TPM register to be checked. + @param[in] BitSet Check these data bits are set. + @param[in] BitClear Check these data bits are clear. + @param[in] TimeOut The max wait time (unit MicroSecond) when checking register. + + @retval EFI_SUCCESS The register satisfies the check bit. + @retval EFI_TIMEOUT The register can't run into the expected status in time. +**/ +EFI_STATUS +TisPcWaitRegisterBits ( + IN UINTN Register, + IN UINT8 BitSet, + IN UINT8 BitClear, + IN UINT32 TimeOut + ) +{ + UINT8 RegRead; + UINT32 WaitTime; + + for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){ + RegRead = TpmReadByte (Register); + if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0) + return EFI_SUCCESS; + MicroSecondDelay (30); + } + return EFI_TIMEOUT; +} + +/** + Get BurstCount by reading the burstCount field of a TIS register + in the time of default TIS_TIMEOUT_D. + + @param[out] BurstCount Pointer to a buffer to store the got BurstConut. + + @retval EFI_SUCCESS Get BurstCount. + @retval EFI_INVALID_PARAMETER BurstCount is NULL. + @retval EFI_TIMEOUT BurstCount can't be got in time. +**/ +EFI_STATUS +TisPcReadBurstCount ( + OUT UINT16 *BurstCount + ) +{ + UINT32 WaitTime; + UINT8 DataByte0; + UINT8 DataByte1; + + if (BurstCount == NULL) { + return EFI_INVALID_PARAMETER; + } + + WaitTime = 0; + do { + // + // BurstCount is UINT16, but it is not 2bytes aligned, + // so it needs to use TpmReadByte to read two times + // + DataByte0 = TpmReadByte (INFINEON_TPM_BURST0_COUNT_0_DEFAULT); + DataByte1 = TpmReadByte (INFINEON_TPM_BURST1_COUNT_0_DEFAULT); + *BurstCount = (UINT16)((DataByte1 << 8) + DataByte0); + if (*BurstCount != 0) { + return EFI_SUCCESS; + } + MicroSecondDelay (30); + WaitTime += 30; + } while (WaitTime < TIS_TIMEOUT_D); + + return EFI_TIMEOUT; +} + +/** + Set TPM chip to ready state by sending ready command TIS_PC_STS_READY + to Status Register in time. + + @retval EFI_SUCCESS TPM chip enters into ready state. + @retval EFI_TIMEOUT TPM chip can't be set to ready state in time. +**/ +EFI_STATUS +TisPcPrepareCommand ( + VOID + ) +{ + EFI_STATUS Status; + + TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY); + Status = TisPcWaitRegisterBits ( + INFINEON_TPM_STS_0_ADDRESS_DEFAULT, + TIS_PC_STS_READY, + 0, + TIS_TIMEOUT_B + ); + return Status; +} + +/** + This service requests use TPM12. + + @retval EFI_SUCCESS Get the control of TPM12 chip. + @retval EFI_NOT_FOUND TPM12 not found. + @retval EFI_DEVICE_ERROR Unexpected device behavior. +**/ +EFI_STATUS +EFIAPI +Tpm12RequestUseTpm ( + VOID + ) +{ + EFI_STATUS Status; + + // + // Check to see if TPM exists + // + if (TpmReadByte (INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT) == 0xFF) { + return EFI_NOT_FOUND; + } + + TpmWriteByte (INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT, TIS_PC_ACC_RQUUSE); + + // + // No locality set before, ACCESS_X.activeLocality MUST be valid within TIMEOUT_A + // + Status = TisPcWaitRegisterBits ( + INFINEON_TPM_ACCESS_0_ADDRESS_DEFAULT, + (UINT8)(TIS_PC_ACC_ACTIVE |TIS_PC_VALID), + 0, + TIS_TIMEOUT_A + ); + return Status; +} + +/** + Send command to TPM for execution. + + @param[in] TpmBuffer Buffer for TPM command data. + @param[in] DataLength TPM command data length. + + @retval EFI_SUCCESS Operation completed successfully. + @retval EFI_TIMEOUT The register can't run into the expected status in time. + +**/ +EFI_STATUS +TisPcSend ( + IN UINT8 *TpmBuffer, + IN UINT32 DataLength + ) +{ + UINT16 BurstCount; + UINT32 Index; + EFI_STATUS Status; + + Status = TisPcPrepareCommand (); + if (EFI_ERROR (Status)){ + DEBUG ((DEBUG_ERROR, "The TPM is not ready!\n")); + goto Done; + } + Index = 0; + while (Index < DataLength) { + Status = TisPcReadBurstCount (&BurstCount); + if (EFI_ERROR (Status)) { + Status = EFI_TIMEOUT; + goto Done; + } + for (; BurstCount > 0 && Index < DataLength; BurstCount--) { + TpmWriteByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT, *(TpmBuffer + Index)); + Index++; + } + } + // + // Ensure the TPM status STS_EXPECT change from 1 to 0 + // + Status = TisPcWaitRegisterBits ( + INFINEON_TPM_STS_0_ADDRESS_DEFAULT, + (UINT8) TIS_PC_VALID, + TIS_PC_STS_EXPECT, + TIS_TIMEOUT_C + ); + if (EFI_ERROR (Status)) { + goto Done; + } + + // + // Start the command + // + TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_GO); + +Done: + if (EFI_ERROR (Status)) { + // + // Ensure the TPM state change from "Reception" to "Idle/Ready" + // + TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY); + } + + return Status; +} + +/** + Receive response data of last command from TPM. + + @param[out] TpmBuffer Buffer for response data. + @param[out] RespSize Response data length. + + @retval EFI_SUCCESS Operation completed successfully. + @retval EFI_TIMEOUT The register can't run into the expected status in time. + @retval EFI_DEVICE_ERROR Unexpected device status. + @retval EFI_BUFFER_TOO_SMALL Response data is too long. + +**/ +EFI_STATUS +TisPcReceive ( + OUT UINT8 *TpmBuffer, + OUT UINT32 *RespSize + ) +{ + EFI_STATUS Status; + UINT16 BurstCount; + UINT32 Index; + UINT32 ResponseSize; + TPM_RSP_COMMAND_HDR *ResponseHeader; + + // + // Wait for the command completion + // + Status = TisPcWaitRegisterBits ( + INFINEON_TPM_STS_0_ADDRESS_DEFAULT, + (UINT8) (TIS_PC_VALID | TIS_PC_STS_DATA), + 0, + TIS_TIMEOUT_B + ); + if (EFI_ERROR (Status)) { + Status = EFI_TIMEOUT; + goto Done; + } + // + // Read the response data header and check it + // + Index = 0; + BurstCount = 0; + while (Index < sizeof (TPM_RSP_COMMAND_HDR)) { + Status = TisPcReadBurstCount (&BurstCount); + if (EFI_ERROR (Status)) { + Status = EFI_TIMEOUT; + goto Done; + } + for (; BurstCount > 0 ; BurstCount--) { + *(TpmBuffer + Index) = TpmReadByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT); + Index++; + if (Index == sizeof (TPM_RSP_COMMAND_HDR)) + break; + } + } + + // + // Check the response data header (tag, parasize and returncode) + // + ResponseHeader = (TPM_RSP_COMMAND_HDR *)TpmBuffer; + if (SwapBytes16 (ReadUnaligned16 (&ResponseHeader->tag)) != TPM_TAG_RSP_COMMAND) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + ResponseSize = SwapBytes32 (ReadUnaligned32 (&ResponseHeader->paramSize)); + if (ResponseSize == sizeof (TPM_RSP_COMMAND_HDR)) { + Status = EFI_SUCCESS; + goto Done; + } + if (ResponseSize < sizeof (TPM_RSP_COMMAND_HDR)) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + if (*RespSize < ResponseSize) { + Status = EFI_BUFFER_TOO_SMALL; + goto Done; + } + *RespSize = ResponseSize; + + // + // Continue reading the remaining data + // + while (Index < ResponseSize) { + for (; BurstCount > 0 ; BurstCount--) { + *(TpmBuffer + Index) = TpmReadByte (INFINEON_TPM_DATA_FIFO_0_ADDRESS_DEFAULT); + Index++; + if (Index == ResponseSize) { + Status = EFI_SUCCESS; + goto Done; + } + } + Status = TisPcReadBurstCount (&BurstCount); + if (EFI_ERROR (Status) && (Index < ResponseSize)) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + } + +Done: + // + // Ensure the TPM state change from "Execution" or "Completion" to "Idle/Ready" + // + TpmWriteByte (INFINEON_TPM_STS_0_ADDRESS_DEFAULT, TIS_PC_STS_READY); + + return Status; +} + +/** + This service enables the sending of commands to the TPM12. + + @param[in] InputParameterBlockSize Size of the TPM12 input parameter block. + @param[in] InputParameterBlock Pointer to the TPM12 input parameter block. + @param[in,out] OutputParameterBlockSize Size of the TPM12 output parameter block. + @param[in] OutputParameterBlock Pointer to the TPM12 output parameter block. + + @retval EFI_SUCCESS The command byte stream was successfully sent to + the device and a response was successfully received. + @retval EFI_DEVICE_ERROR The command was not successfully sent to the + device or a response was not successfully received + from the device. + @retval EFI_BUFFER_TOO_SMALL The output parameter block is too small. +**/ +EFI_STATUS +EFIAPI +Tpm12SubmitCommand ( + IN UINT32 InputParameterBlockSize, + IN UINT8 *InputParameterBlock, + IN OUT UINT32 *OutputParameterBlockSize, + IN UINT8 *OutputParameterBlock + ) +{ + EFI_STATUS Status; + + Status = TisPcSend (InputParameterBlock, InputParameterBlockSize); + if (!EFI_ERROR (Status)) { + Status = TisPcReceive (OutputParameterBlock, OutputParameterBlockSize); + } + return Status; +} diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf new file mode 100644 index 0000000000..62b620fc57 --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.inf @@ -0,0 +1,44 @@ +## @file +# Provides some common functions for the TCG feature for Infineon I2C TPM. +# +# This instance provides basic TPM Interface Specification (TIS) functions +# for Infineon I2C TPM. +# +# Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.
+# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +## + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = Tpm12DeviceLibInfineonI2c + MODULE_UNI_FILE = Tpm12DeviceLibInfineonI2c.uni + FILE_GUID = DBE37563-AFEF-4B41-BDCE-B01B6D1E8690 + MODULE_TYPE = PEIM + VERSION_STRING = 1.0 + LIBRARY_CLASS = Tpm12DeviceLib|PEIM DXE_DRIVER DXE_SMM_DRIVER UEFI_DRIVER + +# +# The following information is for reference only and not required by the build tools. +# +# VALID_ARCHITECTURES = IA32 X64 IPF +# + +[Sources] + TisPc.c + +[Packages] + MdePkg/MdePkg.dec + SecurityPkg/SecurityPkg.dec + QuarkSocPkg/QuarkSocPkg.dec + +[LibraryClasses] + BaseLib + TimerLib + DebugLib + I2cLib diff --git a/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni new file mode 100644 index 0000000000..601f467486 --- /dev/null +++ b/QuarkPlatformPkg/Library/Tpm12DeviceLibInfineonI2c/Tpm12DeviceLibInfineonI2c.uni @@ -0,0 +1,21 @@ +// /** @file +// Provides some common functions for the TCG feature for Infineon I2C TPM. +// +// This instance provides basic TPM Interface Specification (TIS) functions +// for Infineon I2C TPM. +// +// Copyright (c) 2016, Intel Corporation. All rights reserved.
+// +// This program and the accompanying materials +// are licensed and made available under the terms and conditions of the BSD License +// which accompanies this distribution. The full text of the license may be found at +// http://opensource.org/licenses/bsd-license.php +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +// +// **/ + +#string STR_MODULE_ABSTRACT #language en-US "Provides some common functions for the TCG feature for Infineon I2C TPM" + +#string STR_MODULE_DESCRIPTION #language en-US "This instance provides basic TPM Interface Specification (TIS) functions for Infineon I2C TPM." + -- cgit v1.2.3