/** @file
*
* Copyright (c) 2011-2021, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
**/
#ifndef ARMGIC_H_
#define ARMGIC_H_
#include
// GIC Distributor
#define ARM_GIC_ICDDCR 0x000 // Distributor Control Register
#define ARM_GIC_ICDICTR 0x004 // Interrupt Controller Type Register
#define ARM_GIC_ICDIIDR 0x008 // Implementer Identification Register
// Each reg base below repeats for Number of interrupts / 4 (see GIC spec)
#define ARM_GIC_ICDISR 0x080 // Interrupt Security Registers
#define ARM_GIC_ICDISER 0x100 // Interrupt Set-Enable Registers
#define ARM_GIC_ICDICER 0x180 // Interrupt Clear-Enable Registers
#define ARM_GIC_ICDSPR 0x200 // Interrupt Set-Pending Registers
#define ARM_GIC_ICDICPR 0x280 // Interrupt Clear-Pending Registers
#define ARM_GIC_ICDABR 0x300 // Active Bit Registers
// Each reg base below repeats for Number of interrupts / 4
#define ARM_GIC_ICDIPR 0x400 // Interrupt Priority Registers
// Each reg base below repeats for Number of interrupts
#define ARM_GIC_ICDIPTR 0x800 // Interrupt Processor Target Registers
#define ARM_GIC_ICDICFR 0xC00 // Interrupt Configuration Registers
#define ARM_GIC_ICDPPISR 0xD00 // PPI Status register
// just one of these
#define ARM_GIC_ICDSGIR 0xF00 // Software Generated Interrupt Register
// GICv3 specific registers
#define ARM_GICD_IROUTER 0x6100 // Interrupt Routing Registers
// GICD_CTLR bits
#define ARM_GIC_ICDDCR_ARE (1 << 4) // Affinity Routing Enable (ARE)
#define ARM_GIC_ICDDCR_DS (1 << 6) // Disable Security (DS)
// GICD_ICDICFR bits
#define ARM_GIC_ICDICFR_WIDTH 32 // ICDICFR is a 32 bit register
#define ARM_GIC_ICDICFR_BYTES (ARM_GIC_ICDICFR_WIDTH / 8)
#define ARM_GIC_ICDICFR_F_WIDTH 2 // Each F field is 2 bits
#define ARM_GIC_ICDICFR_F_STRIDE 16 // (32/2) F fields per register
#define ARM_GIC_ICDICFR_F_CONFIG1_BIT 1 // Bit number within F field
#define ARM_GIC_ICDICFR_LEVEL_TRIGGERED 0x0 // Level triggered interrupt
#define ARM_GIC_ICDICFR_EDGE_TRIGGERED 0x1 // Edge triggered interrupt
// GIC Redistributor
#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
#define ARM_GICR_SGI_VLPI_FRAME_SIZE SIZE_64KB
#define ARM_GICR_SGI_RESERVED_FRAME_SIZE SIZE_64KB
// GIC Redistributor Control frame
#define ARM_GICR_TYPER 0x0008 // Redistributor Type Register
// GIC Redistributor TYPER bit assignments
#define ARM_GICR_TYPER_PLPIS (1 << 0) // Physical LPIs
#define ARM_GICR_TYPER_VLPIS (1 << 1) // Virtual LPIs
#define ARM_GICR_TYPER_DIRECTLPI (1 << 3) // Direct LPIs
#define ARM_GICR_TYPER_LAST (1 << 4) // Last Redistributor in series
#define ARM_GICR_TYPER_DPGS (1 << 5) // Disable Processor Group
// Selection Support
#define ARM_GICR_TYPER_PROCNO (0xFFFF << 8) // Processor Number
#define ARM_GICR_TYPER_COMMONLPIAFF (0x3 << 24) // Common LPI Affinity
#define ARM_GICR_TYPER_AFFINITY (0xFFFFFFFFULL << 32) // Redistributor Affinity
#define ARM_GICR_TYPER_GET_AFFINITY(TypeReg) (((TypeReg) & \
ARM_GICR_TYPER_AFFINITY) >> 32)
// GIC SGI & PPI Redistributor frame
#define ARM_GICR_ISENABLER 0x0100 // Interrupt Set-Enable Registers
#define ARM_GICR_ICENABLER 0x0180 // Interrupt Clear-Enable Registers
// GIC Cpu interface
#define ARM_GIC_ICCICR 0x00 // CPU Interface Control Register
#define ARM_GIC_ICCPMR 0x04 // Interrupt Priority Mask Register
#define ARM_GIC_ICCBPR 0x08 // Binary Point Register
#define ARM_GIC_ICCIAR 0x0C // Interrupt Acknowledge Register
#define ARM_GIC_ICCEIOR 0x10 // End Of Interrupt Register
#define ARM_GIC_ICCRPR 0x14 // Running Priority Register
#define ARM_GIC_ICCPIR 0x18 // Highest Pending Interrupt Register
#define ARM_GIC_ICCABPR 0x1C // Aliased Binary Point Register
#define ARM_GIC_ICCIIDR 0xFC // Identification Register
#define ARM_GIC_ICDSGIR_FILTER_TARGETLIST 0x0
#define ARM_GIC_ICDSGIR_FILTER_EVERYONEELSE 0x1
#define ARM_GIC_ICDSGIR_FILTER_ITSELF 0x2
// Bit-masks to configure the CPU Interface Control register
#define ARM_GIC_ICCICR_ENABLE_SECURE 0x01
#define ARM_GIC_ICCICR_ENABLE_NS 0x02
#define ARM_GIC_ICCICR_ACK_CTL 0x04
#define ARM_GIC_ICCICR_SIGNAL_SECURE_TO_FIQ 0x08
#define ARM_GIC_ICCICR_USE_SBPR 0x10
// Bit Mask for GICC_IIDR
#define ARM_GIC_ICCIIDR_GET_PRODUCT_ID(IccIidr) (((IccIidr) >> 20) & 0xFFF)
#define ARM_GIC_ICCIIDR_GET_ARCH_VERSION(IccIidr) (((IccIidr) >> 16) & 0xF)
#define ARM_GIC_ICCIIDR_GET_REVISION(IccIidr) (((IccIidr) >> 12) & 0xF)
#define ARM_GIC_ICCIIDR_GET_IMPLEMENTER(IccIidr) ((IccIidr) & 0xFFF)
// Bit Mask for
#define ARM_GIC_ICCIAR_ACKINTID 0x3FF
UINTN
EFIAPI
ArmGicGetInterfaceIdentification (
IN INTN GicInterruptInterfaceBase
);
// GIC Secure interfaces
VOID
EFIAPI
ArmGicSetupNonSecure (
IN UINTN MpId,
IN INTN GicDistributorBase,
IN INTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicSetSecureInterrupts (
IN UINTN GicDistributorBase,
IN UINTN *GicSecureInterruptMask,
IN UINTN GicSecureInterruptMaskSize
);
VOID
EFIAPI
ArmGicEnableInterruptInterface (
IN INTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicDisableInterruptInterface (
IN INTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicEnableDistributor (
IN INTN GicDistributorBase
);
VOID
EFIAPI
ArmGicDisableDistributor (
IN INTN GicDistributorBase
);
UINTN
EFIAPI
ArmGicGetMaxNumInterrupts (
IN INTN GicDistributorBase
);
VOID
EFIAPI
ArmGicSendSgiTo (
IN INTN GicDistributorBase,
IN INTN TargetListFilter,
IN INTN CPUTargetList,
IN INTN SgiId
);
/*
* Acknowledge and return the value of the Interrupt Acknowledge Register
*
* InterruptId is returned separately from the register value because in
* the GICv2 the register value contains the CpuId and InterruptId while
* in the GICv3 the register value is only the InterruptId.
*
* @param GicInterruptInterfaceBase Base Address of the GIC CPU Interface
* @param InterruptId InterruptId read from the Interrupt
* Acknowledge Register
*
* @retval value returned by the Interrupt Acknowledge Register
*
*/
UINTN
EFIAPI
ArmGicAcknowledgeInterrupt (
IN UINTN GicInterruptInterfaceBase,
OUT UINTN *InterruptId
);
VOID
EFIAPI
ArmGicEndOfInterrupt (
IN UINTN GicInterruptInterfaceBase,
IN UINTN Source
);
UINTN
EFIAPI
ArmGicSetPriorityMask (
IN INTN GicInterruptInterfaceBase,
IN INTN PriorityMask
);
VOID
EFIAPI
ArmGicSetInterruptPriority (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source,
IN UINTN Priority
);
VOID
EFIAPI
ArmGicEnableInterrupt (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
);
VOID
EFIAPI
ArmGicDisableInterrupt (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
);
BOOLEAN
EFIAPI
ArmGicIsInterruptEnabled (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
);
// GIC revision 2 specific declarations
// Interrupts from 1020 to 1023 are considered as special interrupts
// (eg: spurious interrupts)
#define ARM_GIC_IS_SPECIAL_INTERRUPTS(Interrupt) \
(((Interrupt) >= 1020) && ((Interrupt) <= 1023))
VOID
EFIAPI
ArmGicV2SetupNonSecure (
IN UINTN MpId,
IN INTN GicDistributorBase,
IN INTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicV2EnableInterruptInterface (
IN INTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicV2DisableInterruptInterface (
IN INTN GicInterruptInterfaceBase
);
UINTN
EFIAPI
ArmGicV2AcknowledgeInterrupt (
IN UINTN GicInterruptInterfaceBase
);
VOID
EFIAPI
ArmGicV2EndOfInterrupt (
IN UINTN GicInterruptInterfaceBase,
IN UINTN Source
);
// GIC revision 3 specific declarations
#define ICC_SRE_EL2_SRE (1 << 0)
#define ARM_GICD_IROUTER_IRM BIT31
UINT32
EFIAPI
ArmGicV3GetControlSystemRegisterEnable (
VOID
);
VOID
EFIAPI
ArmGicV3SetControlSystemRegisterEnable (
IN UINT32 ControlSystemRegisterEnable
);
VOID
EFIAPI
ArmGicV3EnableInterruptInterface (
VOID
);
VOID
EFIAPI
ArmGicV3DisableInterruptInterface (
VOID
);
UINTN
EFIAPI
ArmGicV3AcknowledgeInterrupt (
VOID
);
VOID
EFIAPI
ArmGicV3EndOfInterrupt (
IN UINTN Source
);
VOID
ArmGicV3SetBinaryPointer (
IN UINTN BinaryPoint
);
VOID
ArmGicV3SetPriorityMask (
IN UINTN Priority
);
#endif // ARMGIC_H_