/**@file
WinNt emulator of pre-SEC phase. It's really a Win32 application, but this is
Ok since all the other modules for NT32 are NOT Win32 applications.
This program gets NT32 PCD setting and figures out what the memory layout
will be, how may FD's will be loaded and also what the boot mode is.
This code produces 128 K of temporary memory for the SEC stack by directly
allocate memory space with ReadWrite and Execute attribute.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
(C) Copyright 2016 Hewlett Packard Enterprise Development LP
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "WinHost.h"
#ifndef SE_TIME_ZONE_NAME
#define SE_TIME_ZONE_NAME TEXT("SeTimeZonePrivilege")
#endif
//
// Default information about where the FD is located.
// This array gets filled in with information from PcdWinNtFirmwareVolume
// The number of array elements is allocated base on parsing
// PcdWinNtFirmwareVolume and the memory is never freed.
//
UINTN gFdInfoCount = 0;
NT_FD_INFO *gFdInfo;
//
// Array that supports seperate memory rantes.
// The memory ranges are set by PcdWinNtMemorySizeForSecMain.
// The number of array elements is allocated base on parsing
// PcdWinNtMemorySizeForSecMain value and the memory is never freed.
//
UINTN gSystemMemoryCount = 0;
NT_SYSTEM_MEMORY *gSystemMemory;
/*++
Routine Description:
This service is called from Index == 0 until it returns EFI_UNSUPPORTED.
It allows discontinuous memory regions to be supported by the emulator.
It uses gSystemMemory[] and gSystemMemoryCount that were created by
parsing the host environment variable EFI_MEMORY_SIZE.
The size comes from the varaible and the address comes from the call to
UnixOpenFile.
Arguments:
Index - Which memory region to use
MemoryBase - Return Base address of memory region
MemorySize - Return size in bytes of the memory region
Returns:
EFI_SUCCESS - If memory region was mapped
EFI_UNSUPPORTED - If Index is not supported
**/
EFI_STATUS
WinPeiAutoScan (
IN UINTN Index,
OUT EFI_PHYSICAL_ADDRESS *MemoryBase,
OUT UINT64 *MemorySize
)
{
if (Index >= gSystemMemoryCount) {
return EFI_UNSUPPORTED;
}
//
// Allocate enough memory space for emulator
//
gSystemMemory[Index].Memory = (EFI_PHYSICAL_ADDRESS) (UINTN) VirtualAlloc (NULL, (SIZE_T) (gSystemMemory[Index].Size), MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if (gSystemMemory[Index].Memory == 0) {
return EFI_OUT_OF_RESOURCES;
}
*MemoryBase = gSystemMemory[Index].Memory;
*MemorySize = gSystemMemory[Index].Size;
return EFI_SUCCESS;
}
/*++
Routine Description:
Return the FD Size and base address. Since the FD is loaded from a
file into host memory only the SEC will know it's address.
Arguments:
Index - Which FD, starts at zero.
FdSize - Size of the FD in bytes
FdBase - Start address of the FD. Assume it points to an FV Header
FixUp - Difference between actual FD address and build address
Returns:
EFI_SUCCESS - Return the Base address and size of the FV
EFI_UNSUPPORTED - Index does nto map to an FD in the system
**/
EFI_STATUS
WinFdAddress (
IN UINTN Index,
IN OUT EFI_PHYSICAL_ADDRESS *FdBase,
IN OUT UINT64 *FdSize,
IN OUT EFI_PHYSICAL_ADDRESS *FixUp
)
{
if (Index >= gFdInfoCount) {
return EFI_UNSUPPORTED;
}
*FdBase = (EFI_PHYSICAL_ADDRESS)(UINTN)gFdInfo[Index].Address;
*FdSize = (UINT64)gFdInfo[Index].Size;
*FixUp = 0;
if (*FdBase == 0 && *FdSize == 0) {
return EFI_UNSUPPORTED;
}
if (Index == 0) {
//
// FD 0 has XIP code and well known PCD values
// If the memory buffer could not be allocated at the FD build address
// the Fixup is the difference.
//
*FixUp = *FdBase - PcdGet64 (PcdEmuFdBaseAddress);
}
return EFI_SUCCESS;
}
/*++
Routine Description:
Since the SEC is the only Unix program in stack it must export
an interface to do POSIX calls. gUnix is initialized in UnixThunk.c.
Arguments:
InterfaceSize - sizeof (EFI_WIN_NT_THUNK_PROTOCOL);
InterfaceBase - Address of the gUnix global
Returns:
EFI_SUCCESS - Data returned
**/
VOID *
WinThunk (
VOID
)
{
return &gEmuThunkProtocol;
}
EMU_THUNK_PPI mSecEmuThunkPpi = {
WinPeiAutoScan,
WinFdAddress,
WinThunk
};
VOID
SecPrint (
CHAR8 *Format,
...
)
{
va_list Marker;
UINTN CharCount;
CHAR8 Buffer[0x1000];
va_start (Marker, Format);
_vsnprintf (Buffer, sizeof (Buffer), Format, Marker);
va_end (Marker);
CharCount = strlen (Buffer);
WriteFile (
GetStdHandle (STD_OUTPUT_HANDLE),
Buffer,
(DWORD)CharCount,
(LPDWORD)&CharCount,
NULL
);
}
/*++
Routine Description:
Check to see if an address range is in the EFI GCD memory map.
This is all of GCD for system memory passed to DXE Core. FV
mapping and other device mapped into system memory are not
inlcuded in the check.
Arguments:
Index - Which memory region to use
MemoryBase - Return Base address of memory region
MemorySize - Return size in bytes of the memory region
Returns:
TRUE - Address is in the EFI GCD memory map
FALSE - Address is NOT in memory map
**/
BOOLEAN
EfiSystemMemoryRange (
IN VOID *MemoryAddress
)
{
UINTN Index;
EFI_PHYSICAL_ADDRESS MemoryBase;
MemoryBase = (EFI_PHYSICAL_ADDRESS)(UINTN)MemoryAddress;
for (Index = 0; Index < gSystemMemoryCount; Index++) {
if ((MemoryBase >= gSystemMemory[Index].Memory) &&
(MemoryBase < (gSystemMemory[Index].Memory + gSystemMemory[Index].Size)) ) {
return TRUE;
}
}
return FALSE;
}
EFI_STATUS
WinNtOpenFile (
IN CHAR16 *FileName, OPTIONAL
IN UINT32 MapSize,
IN DWORD CreationDisposition,
IN OUT VOID **BaseAddress,
OUT UINTN *Length
)
/*++
Routine Description:
Opens and memory maps a file using WinNt services. If *BaseAddress is non zero
the process will try and allocate the memory starting at BaseAddress.
Arguments:
FileName - The name of the file to open and map
MapSize - The amount of the file to map in bytes
CreationDisposition - The flags to pass to CreateFile(). Use to create new files for
memory emulation, and exiting files for firmware volume emulation
BaseAddress - The base address of the mapped file in the user address space.
If *BaseAddress is 0, the new memory region is used.
If *BaseAddress is not 0, the request memory region is used for
the mapping of the file into the process space.
Length - The size of the mapped region in bytes
Returns:
EFI_SUCCESS - The file was opened and mapped.
EFI_NOT_FOUND - FileName was not found in the current directory
EFI_DEVICE_ERROR - An error occured attempting to map the opened file
--*/
{
HANDLE NtFileHandle;
HANDLE NtMapHandle;
VOID *VirtualAddress;
UINTN FileSize;
//
// Use Win API to open/create a file
//
NtFileHandle = INVALID_HANDLE_VALUE;
if (FileName != NULL) {
NtFileHandle = CreateFile (
FileName,
GENERIC_READ | GENERIC_WRITE | GENERIC_EXECUTE,
FILE_SHARE_READ,
NULL,
CreationDisposition,
FILE_ATTRIBUTE_NORMAL,
NULL
);
if (NtFileHandle == INVALID_HANDLE_VALUE) {
return EFI_NOT_FOUND;
}
}
//
// Map the open file into a memory range
//
NtMapHandle = CreateFileMapping (
NtFileHandle,
NULL,
PAGE_EXECUTE_READWRITE,
0,
MapSize,
NULL
);
if (NtMapHandle == NULL) {
return EFI_DEVICE_ERROR;
}
//
// Get the virtual address (address in the emulator) of the mapped file
//
VirtualAddress = MapViewOfFileEx (
NtMapHandle,
FILE_MAP_EXECUTE | FILE_MAP_ALL_ACCESS,
0,
0,
MapSize,
*BaseAddress
);
if (VirtualAddress == NULL) {
return EFI_DEVICE_ERROR;
}
if (MapSize == 0) {
//
// Seek to the end of the file to figure out the true file size.
//
FileSize = SetFilePointer (
NtFileHandle,
0,
NULL,
FILE_END
);
if (FileSize == -1) {
return EFI_DEVICE_ERROR;
}
*Length = FileSize;
} else {
*Length = MapSize;
}
*BaseAddress = VirtualAddress;
return EFI_SUCCESS;
}
INTN
EFIAPI
main (
IN INTN Argc,
IN CHAR8 **Argv,
IN CHAR8 **Envp
)
/*++
Routine Description:
Main entry point to SEC for WinNt. This is a Windows program
Arguments:
Argc - Number of command line arguments
Argv - Array of command line argument strings
Envp - Array of environment variable strings
Returns:
0 - Normal exit
1 - Abnormal exit
--*/
{
EFI_STATUS Status;
HANDLE Token;
TOKEN_PRIVILEGES TokenPrivileges;
VOID *TemporaryRam;
UINT32 TemporaryRamSize;
VOID *EmuMagicPage;
UINTN Index;
UINTN Index1;
CHAR16 *FileName;
CHAR16 *FileNamePtr;
BOOLEAN Done;
EFI_PEI_FILE_HANDLE FileHandle;
VOID *SecFile;
CHAR16 *MemorySizeStr;
CHAR16 *FirmwareVolumesStr;
UINT32 ProcessAffinityMask;
UINT32 SystemAffinityMask;
INT32 LowBit;
//
// Enable the privilege so that RTC driver can successfully run SetTime()
//
OpenProcessToken (GetCurrentProcess(), TOKEN_ADJUST_PRIVILEGES|TOKEN_QUERY, &Token);
if (LookupPrivilegeValue(NULL, SE_TIME_ZONE_NAME, &TokenPrivileges.Privileges[0].Luid)) {
TokenPrivileges.PrivilegeCount = 1;
TokenPrivileges.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;
AdjustTokenPrivileges(Token, FALSE, &TokenPrivileges, 0, (PTOKEN_PRIVILEGES) NULL, 0);
}
MemorySizeStr = (CHAR16 *) PcdGetPtr (PcdEmuMemorySize);
FirmwareVolumesStr = (CHAR16 *) PcdGetPtr (PcdEmuFirmwareVolume);
SecPrint ("\nEDK II WIN Host Emulation Environment from http://www.tianocore.org/edk2/\n");
//
// Determine the first thread available to this process.
//
if (GetProcessAffinityMask (GetCurrentProcess (), &ProcessAffinityMask, &SystemAffinityMask)) {
LowBit = (INT32)LowBitSet32 (ProcessAffinityMask);
if (LowBit != -1) {
//
// Force the system to bind the process to a single thread to work
// around odd semaphore type crashes.
//
SetProcessAffinityMask (GetCurrentProcess (), (INTN)(BIT0 << LowBit));
}
}
//
// Make some Windows calls to Set the process to the highest priority in the
// idle class. We need this to have good performance.
//
SetPriorityClass (GetCurrentProcess (), IDLE_PRIORITY_CLASS);
SetThreadPriority (GetCurrentThread (), THREAD_PRIORITY_HIGHEST);
SecInitializeThunk ();
//
// PPIs pased into PEI_CORE
//
AddThunkPpi (EFI_PEI_PPI_DESCRIPTOR_PPI, &gEmuThunkPpiGuid, &mSecEmuThunkPpi);
//
// Emulator Bus Driver Thunks
//
AddThunkProtocol (&mWinNtWndThunkIo, (CHAR16 *)PcdGetPtr (PcdEmuGop), TRUE);
AddThunkProtocol (&mWinNtFileSystemThunkIo, (CHAR16 *)PcdGetPtr (PcdEmuFileSystem), TRUE);
AddThunkProtocol (&mWinNtBlockIoThunkIo, (CHAR16 *)PcdGetPtr (PcdEmuVirtualDisk), TRUE);
//
// Allocate space for gSystemMemory Array
//
gSystemMemoryCount = CountSeparatorsInString (MemorySizeStr, '!') + 1;
gSystemMemory = calloc (gSystemMemoryCount, sizeof (NT_SYSTEM_MEMORY));
if (gSystemMemory == NULL) {
SecPrint ("ERROR : Can not allocate memory for %S. Exiting.\n", MemorySizeStr);
exit (1);
}
//
// Allocate space for gSystemMemory Array
//
gFdInfoCount = CountSeparatorsInString (FirmwareVolumesStr, '!') + 1;
gFdInfo = calloc (gFdInfoCount, sizeof (NT_FD_INFO));
if (gFdInfo == NULL) {
SecPrint ("ERROR : Can not allocate memory for %S. Exiting.\n", FirmwareVolumesStr);
exit (1);
}
//
// Setup Boot Mode.
//
SecPrint (" BootMode 0x%02x\n", PcdGet32 (PcdEmuBootMode));
//
// Allocate 128K memory to emulate temp memory for PEI.
// on a real platform this would be SRAM, or using the cache as RAM.
// Set TemporaryRam to zero so WinNtOpenFile will allocate a new mapping
//
TemporaryRamSize = TEMPORARY_RAM_SIZE;
TemporaryRam = VirtualAlloc (NULL, (SIZE_T) (TemporaryRamSize), MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if (TemporaryRam == NULL) {
SecPrint ("ERROR : Can not allocate enough space for SecStack\n");
exit (1);
}
SetMem32 (TemporaryRam, TemporaryRamSize, PcdGet32 (PcdInitValueInTempStack));
SecPrint (" OS Emulator passing in %u KB of temp RAM at 0x%08lx to SEC\n",
TemporaryRamSize / SIZE_1KB,
TemporaryRam
);
//
// If enabled use the magic page to communicate between modules
// This replaces the PI PeiServicesTable pointer mechanism that
// deos not work in the emulator. It also allows the removal of
// writable globals from SEC, PEI_CORE (libraries), PEIMs
//
EmuMagicPage = (VOID *)(UINTN)(FixedPcdGet64 (PcdPeiServicesTablePage) & MAX_UINTN);
if (EmuMagicPage != NULL) {
UINT64 Size;
Status = WinNtOpenFile (
NULL,
SIZE_4KB,
0,
&EmuMagicPage,
&Size
);
if (EFI_ERROR (Status)) {
SecPrint ("ERROR : Could not allocate PeiServicesTablePage @ %p\n", EmuMagicPage);
return EFI_DEVICE_ERROR;
}
}
//
// Open All the firmware volumes and remember the info in the gFdInfo global
// Meanwhile, find the SEC Core.
//
FileNamePtr = AllocateCopyPool (StrSize (FirmwareVolumesStr), FirmwareVolumesStr);
if (FileNamePtr == NULL) {
SecPrint ("ERROR : Can not allocate memory for firmware volume string\n");
exit (1);
}
for (Done = FALSE, Index = 0, SecFile = NULL; !Done; Index++) {
FileName = FileNamePtr;
for (Index1 = 0; (FileNamePtr[Index1] != '!') && (FileNamePtr[Index1] != 0); Index1++)
;
if (FileNamePtr[Index1] == 0) {
Done = TRUE;
} else {
FileNamePtr[Index1] = '\0';
FileNamePtr = &FileNamePtr[Index1 + 1];
}
//
// Open the FD and remember where it got mapped into our processes address space
//
Status = WinNtOpenFile (
FileName,
0,
OPEN_EXISTING,
&gFdInfo[Index].Address,
&gFdInfo[Index].Size
);
if (EFI_ERROR (Status)) {
SecPrint ("ERROR : Can not open Firmware Device File %S (0x%X). Exiting.\n", FileName, Status);
exit (1);
}
SecPrint (" FD loaded from %S\n", FileName);
if (SecFile == NULL) {
//
// Assume the beginning of the FD is an FV and look for the SEC Core.
// Load the first one we find.
//
FileHandle = NULL;
Status = PeiServicesFfsFindNextFile (
EFI_FV_FILETYPE_SECURITY_CORE,
(EFI_PEI_FV_HANDLE)gFdInfo[Index].Address,
&FileHandle
);
if (!EFI_ERROR (Status)) {
Status = PeiServicesFfsFindSectionData (EFI_SECTION_PE32, FileHandle, &SecFile);
if (!EFI_ERROR (Status)) {
SecPrint (" contains SEC Core");
}
}
}
SecPrint ("\n");
}
//
// Calculate memory regions and store the information in the gSystemMemory
// global for later use. The autosizing code will use this data to
// map this memory into the SEC process memory space.
//
for (Index = 0, Done = FALSE; !Done; Index++) {
//
// Save the size of the memory and make a Unicode filename SystemMemory00, ...
//
gSystemMemory[Index].Size = _wtoi (MemorySizeStr) * SIZE_1MB;
//
// Find the next region
//
for (Index1 = 0; MemorySizeStr[Index1] != '!' && MemorySizeStr[Index1] != 0; Index1++)
;
if (MemorySizeStr[Index1] == 0) {
Done = TRUE;
}
MemorySizeStr = MemorySizeStr + Index1 + 1;
}
SecPrint ("\n");
//
// Hand off to SEC Core
//
SecLoadSecCore ((UINTN)TemporaryRam, TemporaryRamSize, gFdInfo[0].Address, gFdInfo[0].Size, SecFile);
//
// If we get here, then the SEC Core returned. This is an error as SEC should
// always hand off to PEI Core and then on to DXE Core.
//
SecPrint ("ERROR : SEC returned\n");
exit (1);
}
VOID
SecLoadSecCore (
IN UINTN TemporaryRam,
IN UINTN TemporaryRamSize,
IN VOID *BootFirmwareVolumeBase,
IN UINTN BootFirmwareVolumeSize,
IN VOID *SecCorePe32File
)
/*++
Routine Description:
This is the service to load the SEC Core from the Firmware Volume
Arguments:
TemporaryRam - Memory to use for SEC.
TemporaryRamSize - Size of Memory to use for SEC
BootFirmwareVolumeBase - Start of the Boot FV
SecCorePe32File - SEC Core PE32
Returns:
Success means control is transfered and thus we should never return
--*/
{
EFI_STATUS Status;
VOID *TopOfStack;
VOID *SecCoreEntryPoint;
EFI_SEC_PEI_HAND_OFF *SecCoreData;
UINTN SecStackSize;
//
// Compute Top Of Memory for Stack and PEI Core Allocations
//
SecStackSize = TemporaryRamSize >> 1;
//
// |-----------| <---- TemporaryRamBase + TemporaryRamSize
// | Heap |
// | |
// |-----------| <---- StackBase / PeiTemporaryMemoryBase
// | |
// | Stack |
// |-----------| <---- TemporaryRamBase
//
TopOfStack = (VOID *)(TemporaryRam + SecStackSize);
//
// Reservet space for storing PeiCore's parament in stack.
//
TopOfStack = (VOID *)((UINTN)TopOfStack - sizeof (EFI_SEC_PEI_HAND_OFF) - CPU_STACK_ALIGNMENT);
TopOfStack = ALIGN_POINTER (TopOfStack, CPU_STACK_ALIGNMENT);
//
// Bind this information into the SEC hand-off state
//
SecCoreData = (EFI_SEC_PEI_HAND_OFF*)(UINTN)TopOfStack;
SecCoreData->DataSize = sizeof (EFI_SEC_PEI_HAND_OFF);
SecCoreData->BootFirmwareVolumeBase = BootFirmwareVolumeBase;
SecCoreData->BootFirmwareVolumeSize = BootFirmwareVolumeSize;
SecCoreData->TemporaryRamBase = (VOID*)TemporaryRam;
SecCoreData->TemporaryRamSize = TemporaryRamSize;
SecCoreData->StackBase = SecCoreData->TemporaryRamBase;
SecCoreData->StackSize = SecStackSize;
SecCoreData->PeiTemporaryRamBase = (VOID*) ((UINTN) SecCoreData->TemporaryRamBase + SecStackSize);
SecCoreData->PeiTemporaryRamSize = TemporaryRamSize - SecStackSize;
//
// Load the PEI Core from a Firmware Volume
//
Status = SecPeCoffGetEntryPoint (
SecCorePe32File,
&SecCoreEntryPoint
);
if (EFI_ERROR (Status)) {
return ;
}
//
// Transfer control to the SEC Core
//
SwitchStack (
(SWITCH_STACK_ENTRY_POINT)(UINTN)SecCoreEntryPoint,
SecCoreData,
GetThunkPpiList (),
TopOfStack
);
//
// If we get here, then the SEC Core returned. This is an error
//
return ;
}
RETURN_STATUS
EFIAPI
SecPeCoffGetEntryPoint (
IN VOID *Pe32Data,
IN OUT VOID **EntryPoint
)
{
EFI_STATUS Status;
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
ZeroMem (&ImageContext, sizeof (ImageContext));
ImageContext.Handle = Pe32Data;
ImageContext.ImageRead = (PE_COFF_LOADER_READ_FILE) SecImageRead;
Status = PeCoffLoaderGetImageInfo (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Allocate space in NT (not emulator) memory with ReadWrite and Execute attribute.
// Extra space is for alignment
//
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) VirtualAlloc (NULL, (SIZE_T) (ImageContext.ImageSize + (ImageContext.SectionAlignment * 2)), MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if (ImageContext.ImageAddress == 0) {
return EFI_OUT_OF_RESOURCES;
}
//
// Align buffer on section boundary
//
ImageContext.ImageAddress += ImageContext.SectionAlignment - 1;
ImageContext.ImageAddress &= ~((EFI_PHYSICAL_ADDRESS)ImageContext.SectionAlignment - 1);
Status = PeCoffLoaderLoadImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
Status = PeCoffLoaderRelocateImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
*EntryPoint = (VOID *)(UINTN)ImageContext.EntryPoint;
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
SecImageRead (
IN VOID *FileHandle,
IN UINTN FileOffset,
IN OUT UINTN *ReadSize,
OUT VOID *Buffer
)
/*++
Routine Description:
Support routine for the PE/COFF Loader that reads a buffer from a PE/COFF file
Arguments:
FileHandle - The handle to the PE/COFF file
FileOffset - The offset, in bytes, into the file to read
ReadSize - The number of bytes to read from the file starting at FileOffset
Buffer - A pointer to the buffer to read the data into.
Returns:
EFI_SUCCESS - ReadSize bytes of data were read into Buffer from the PE/COFF file starting at FileOffset
--*/
{
CHAR8 *Destination8;
CHAR8 *Source8;
UINTN Length;
Destination8 = Buffer;
Source8 = (CHAR8 *) ((UINTN) FileHandle + FileOffset);
Length = *ReadSize;
while (Length--) {
*(Destination8++) = *(Source8++);
}
return EFI_SUCCESS;
}
CHAR16 *
AsciiToUnicode (
IN CHAR8 *Ascii,
IN UINTN *StrLen OPTIONAL
)
/*++
Routine Description:
Convert the passed in Ascii string to Unicode.
Optionally return the length of the strings.
Arguments:
Ascii - Ascii string to convert
StrLen - Length of string
Returns:
Pointer to malloc'ed Unicode version of Ascii
--*/
{
UINTN Index;
CHAR16 *Unicode;
//
// Allocate a buffer for unicode string
//
for (Index = 0; Ascii[Index] != '\0'; Index++)
;
Unicode = malloc ((Index + 1) * sizeof (CHAR16));
if (Unicode == NULL) {
return NULL;
}
for (Index = 0; Ascii[Index] != '\0'; Index++) {
Unicode[Index] = (CHAR16) Ascii[Index];
}
Unicode[Index] = '\0';
if (StrLen != NULL) {
*StrLen = Index;
}
return Unicode;
}
UINTN
CountSeparatorsInString (
IN CONST CHAR16 *String,
IN CHAR16 Separator
)
/*++
Routine Description:
Count the number of separators in String
Arguments:
String - String to process
Separator - Item to count
Returns:
Number of Separator in String
--*/
{
UINTN Count;
for (Count = 0; *String != '\0'; String++) {
if (*String == Separator) {
Count++;
}
}
return Count;
}
VOID
EFIAPI
PeCoffLoaderRelocateImageExtraAction (
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
)
{
VOID *DllEntryPoint;
CHAR16 *DllFileName;
HMODULE Library;
UINTN Index;
ASSERT (ImageContext != NULL);
//
// If we load our own PE COFF images the Windows debugger can not source
// level debug our code. If a valid PDB pointer exists usw it to load
// the *.dll file as a library using Windows* APIs. This allows
// source level debug. The image is still loaded and relocated
// in the Framework memory space like on a real system (by the code above),
// but the entry point points into the DLL loaded by the code bellow.
//
DllEntryPoint = NULL;
//
// Load the DLL if it's not an EBC image.
//
if ((ImageContext->PdbPointer != NULL) &&
(ImageContext->Machine != EFI_IMAGE_MACHINE_EBC)) {
//
// Convert filename from ASCII to Unicode
//
DllFileName = AsciiToUnicode (ImageContext->PdbPointer, &Index);
//
// Check that we have a valid filename
//
if (Index < 5 || DllFileName[Index - 4] != '.') {
free (DllFileName);
//
// Never return an error if PeCoffLoaderRelocateImage() succeeded.
// The image will run, but we just can't source level debug. If we
// return an error the image will not run.
//
return;
}
//
// Replace .PDB with .DLL on the filename
//
DllFileName[Index - 3] = 'D';
DllFileName[Index - 2] = 'L';
DllFileName[Index - 1] = 'L';
//
// Load the .DLL file into the user process's address space for source
// level debug
//
Library = LoadLibraryEx (DllFileName, NULL, DONT_RESOLVE_DLL_REFERENCES);
if (Library != NULL) {
//
// InitializeDriver is the entry point we put in all our EFI DLL's. The
// DONT_RESOLVE_DLL_REFERENCES argument to LoadLIbraryEx() suppresses the
// normal DLL entry point of DllMain, and prevents other modules that are
// referenced in side the DllFileName from being loaded. There is no error
// checking as the we can point to the PE32 image loaded by Tiano. This
// step is only needed for source level debugging
//
DllEntryPoint = (VOID *) (UINTN) GetProcAddress (Library, "InitializeDriver");
}
if ((Library != NULL) && (DllEntryPoint != NULL)) {
ImageContext->EntryPoint = (EFI_PHYSICAL_ADDRESS) (UINTN) DllEntryPoint;
SecPrint ("LoadLibraryEx (%S,\n NULL, DONT_RESOLVE_DLL_REFERENCES)\n", DllFileName);
} else {
SecPrint ("WARNING: No source level debug %S. \n", DllFileName);
}
free (DllFileName);
}
}
VOID
EFIAPI
PeCoffLoaderUnloadImageExtraAction (
IN PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
)
{
ASSERT (ImageContext != NULL);
}
VOID
_ModuleEntryPoint (
VOID
)
{
}