/**@file

Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "pcibus.h"
#include "PciResourceSupport.h"
#include "PciCommand.h"

EFI_STATUS
SkipVGAAperture (
  OUT UINT64   *Start,
  IN  UINT64   Length
  )
/*++

Routine Description:

  The function is used to skip VGA range

Arguments:

Returns:

  None

--*/
// TODO:    Start - add argument and description to function comment
// TODO:    Length - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  UINT64  Original;
  UINT64  Mask;
  UINT64  StartOffset;
  UINT64  LimitOffset;

  //
  // For legacy VGA, bit 10 to bit 15 is not decoded
  //
  Mask        = 0x3FF;

  Original    = *Start;
  StartOffset = Original & Mask;
  LimitOffset = ((*Start) + Length - 1) & Mask;
  if (LimitOffset >= VGABASE1) {
    *Start = *Start - StartOffset + VGALIMIT2 + 1;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
SkipIsaAliasAperture (
  OUT UINT64   *Start,
  IN  UINT64   Length
  )
/*++

Routine Description:

  This function is used to skip ISA aliasing aperture

Arguments:

Returns:

  None

--*/
// TODO:    Start - add argument and description to function comment
// TODO:    Length - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  UINT64  Original;
  UINT64  Mask;
  UINT64  StartOffset;
  UINT64  LimitOffset;

  //
  // For legacy ISA, bit 10 to bit 15 is not decoded
  //
  Mask        = 0x3FF;

  Original    = *Start;
  StartOffset = Original & Mask;
  LimitOffset = ((*Start) + Length - 1) & Mask;

  if (LimitOffset >= ISABASE) {
    *Start = *Start - StartOffset + ISALIMIT + 1;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
InsertResourceNode (
  PCI_RESOURCE_NODE *Bridge,
  PCI_RESOURCE_NODE *ResNode
  )
/*++

Routine Description:

  This function inserts a resource node into the resource list.
  The resource list is sorted in descend order.

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    ResNode - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  LIST_ENTRY        *CurrentLink;
  PCI_RESOURCE_NODE *Temp;
  UINT64            ResNodeAlignRest;
  UINT64            TempAlignRest;

  InsertHeadList (&Bridge->ChildList, &ResNode->Link);

  CurrentLink = Bridge->ChildList.ForwardLink->ForwardLink;
  while (CurrentLink != &Bridge->ChildList) {
    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (ResNode->Alignment > Temp->Alignment) {
      break;
    } else if (ResNode->Alignment == Temp->Alignment) {
      ResNodeAlignRest  = ResNode->Length & ResNode->Alignment;
      TempAlignRest     = Temp->Length & Temp->Alignment;
      if ((ResNodeAlignRest == 0) || (ResNodeAlignRest >= TempAlignRest)) {
        break;
      }
    }

    SwapListEntries (&ResNode->Link, CurrentLink);

    CurrentLink = ResNode->Link.ForwardLink;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
MergeResourceTree (
  PCI_RESOURCE_NODE *Dst,
  PCI_RESOURCE_NODE *Res,
  BOOLEAN           TypeMerge
  )
/*++

Routine Description:

  This routine is used to merge two different resource tree in need of
  resoure degradation. For example, if a upstream PPB doesn't support,
  prefetchable memory decoding, the PCI bus driver will choose to call this function
  to merge prefectchable memory resource list into normal memory list.

  If the TypeMerge is TRUE, Res resource type is changed to the type of destination resource
  type.

Arguments:

Returns:

  None

--*/
// TODO:    Dst - add argument and description to function comment
// TODO:    Res - add argument and description to function comment
// TODO:    TypeMerge - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  LIST_ENTRY        *CurrentLink;
  PCI_RESOURCE_NODE *Temp;

  while (!IsListEmpty (&Res->ChildList)) {
    CurrentLink = Res->ChildList.ForwardLink;

    Temp        = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (TypeMerge) {
      Temp->ResType = Dst->ResType;
    }

    RemoveEntryList (CurrentLink);
    InsertResourceNode (Dst, Temp);

  }

  return EFI_SUCCESS;
}

EFI_STATUS
CalculateApertureIo16 (
  IN PCI_RESOURCE_NODE *Bridge
  )
/*++

Routine Description:

  This function is used to calculate the IO16 aperture
  for a bridge.

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  UINT64            Aperture;
  LIST_ENTRY        *CurrentLink;
  PCI_RESOURCE_NODE *Node;
  UINT64            offset;
  BOOLEAN           IsaEnable;
  BOOLEAN           VGAEnable;

  //
  // Always assume there is ISA device and VGA device on the platform
  // will be customized later
  //
  IsaEnable = FALSE;
  VGAEnable = FALSE;

  if (FeaturePcdGet (PcdPciIsaEnable)){
    IsaEnable = TRUE;
  }

  if (FeaturePcdGet (PcdPciVgaEnable)){
    VGAEnable = TRUE;
  }

  Aperture = 0;

  if (!Bridge) {
    return EFI_SUCCESS;
  }

  CurrentLink = Bridge->ChildList.ForwardLink;

  //
  // Assume the bridge is aligned
  //
  while (CurrentLink != &Bridge->ChildList) {

    Node = RESOURCE_NODE_FROM_LINK (CurrentLink);

    //
    // Consider the aperture alignment
    //
    offset = Aperture & (Node->Alignment);

    if (offset) {

      Aperture = Aperture + (Node->Alignment + 1) - offset;

    }

    //
    // IsaEnable and VGAEnable can not be implemented now.
    // If both of them are enabled, then the IO resource would
    // become too limited to meet the requirement of most of devices.
    //

    if (IsaEnable || VGAEnable) {
      if (!IS_PCI_BRIDGE (&(Node->PciDev->Pci)) && !IS_CARDBUS_BRIDGE (&(Node->PciDev->Pci))) {
        //
        // Check if there is need to support ISA/VGA decoding
        // If so, we need to avoid isa/vga aliasing range
        //
        if (IsaEnable) {
          SkipIsaAliasAperture (
            &Aperture,
            Node->Length               
            );
          offset = Aperture & (Node->Alignment);
          if (offset) {
            Aperture = Aperture + (Node->Alignment + 1) - offset;
          }
        } else if (VGAEnable) {
          SkipVGAAperture (
            &Aperture,
            Node->Length
            );
          offset = Aperture & (Node->Alignment);
          if (offset) {
            Aperture = Aperture + (Node->Alignment + 1) - offset;
          }
        }
      }
    }

    Node->Offset = Aperture;

    //
    // Increment aperture by the length of node
    //
    Aperture += Node->Length;

    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // At last, adjust the aperture with the bridge's
  // alignment
  //
  offset = Aperture & (Bridge->Alignment);

  if (offset) {
    Aperture = Aperture + (Bridge->Alignment + 1) - offset;
  }

  Bridge->Length = Aperture;
  //
  // At last, adjust the bridge's alignment to the first child's alignment
  // if the bridge has at least one child
  //
  CurrentLink = Bridge->ChildList.ForwardLink;
  if (CurrentLink != &Bridge->ChildList) {
    Node = RESOURCE_NODE_FROM_LINK (CurrentLink);
    if (Node->Alignment > Bridge->Alignment) {
      Bridge->Alignment = Node->Alignment;
    }
  }

  return EFI_SUCCESS;
}

EFI_STATUS
CalculateResourceAperture (
  IN PCI_RESOURCE_NODE *Bridge
  )
/*++

Routine Description:

  This function is used to calculate the resource aperture
  for a given bridge device

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  UINT64            Aperture;
  LIST_ENTRY        *CurrentLink;
  PCI_RESOURCE_NODE *Node;

  UINT64            offset;

  Aperture = 0;

  if (!Bridge) {
    return EFI_SUCCESS;
  }

  if (Bridge->ResType == PciBarTypeIo16) {
    return CalculateApertureIo16 (Bridge);
  }

  CurrentLink = Bridge->ChildList.ForwardLink;

  //
  // Assume the bridge is aligned
  //
  while (CurrentLink != &Bridge->ChildList) {

    Node = RESOURCE_NODE_FROM_LINK (CurrentLink);

    //
    // Apply padding resource if available
    //
        
    offset = Aperture & (Node->Alignment);

    if (offset) {

      Aperture = Aperture + (Node->Alignment + 1) - offset;

    }

    //
    // Recode current aperture as a offset
    // this offset will be used in future real allocation
    //
    Node->Offset = Aperture;

    //
    // Increment aperture by the length of node
    //
    Aperture += Node->Length;

    //
    // Consider the aperture alignment
    //
    
    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // At last, adjust the aperture with the bridge's
  // alignment
  //
  offset = Aperture & (Bridge->Alignment);
  if (offset) {
    Aperture = Aperture + (Bridge->Alignment + 1) - offset;
  }

  //
  // If the bridge has already padded the resource and the
  // amount of padded resource is larger, then keep the
  // padded resource
  //
  if (Bridge->Length < Aperture) {
    Bridge->Length = Aperture;
  }
  
  //
  // At last, adjust the bridge's alignment to the first child's alignment
  // if the bridge has at least one child
  //
  CurrentLink = Bridge->ChildList.ForwardLink;
  if (CurrentLink != &Bridge->ChildList) {
    Node = RESOURCE_NODE_FROM_LINK (CurrentLink);
    if (Node->Alignment > Bridge->Alignment) {
      Bridge->Alignment = Node->Alignment;
    }
  }

  return EFI_SUCCESS;
}

EFI_STATUS
GetResourceFromDevice (
  PCI_IO_DEVICE     *PciDev,
  PCI_RESOURCE_NODE *IoNode,
  PCI_RESOURCE_NODE *Mem32Node,
  PCI_RESOURCE_NODE *PMem32Node,
  PCI_RESOURCE_NODE *Mem64Node,
  PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

Arguments:

Returns:

  None

--*/
// TODO:    PciDev - add argument and description to function comment
// TODO:    IoNode - add argument and description to function comment
// TODO:    Mem32Node - add argument and description to function comment
// TODO:    PMem32Node - add argument and description to function comment
// TODO:    Mem64Node - add argument and description to function comment
// TODO:    PMem64Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  UINT8             Index;
  PCI_RESOURCE_NODE *Node;
  BOOLEAN           ResourceRequested;

  Node              = NULL;
  ResourceRequested = FALSE;

  for (Index = 0; Index < PCI_MAX_BAR; Index++) {

    switch ((PciDev->PciBar)[Index].BarType) {

    case PciBarTypeMem32:

      Node = CreateResourceNode (
              PciDev,
              (PciDev->PciBar)[Index].Length,
              (PciDev->PciBar)[Index].Alignment,
              Index,
              PciBarTypeMem32,
              PciResUsageTypical
              );

      InsertResourceNode (
        Mem32Node,
        Node
        );

      ResourceRequested = TRUE;
      break;

    case PciBarTypeMem64:

      Node = CreateResourceNode (
              PciDev,
              (PciDev->PciBar)[Index].Length,
              (PciDev->PciBar)[Index].Alignment,
              Index,
              PciBarTypeMem64,
              PciResUsageTypical
              );

      InsertResourceNode (
        Mem64Node,
        Node
        );

      ResourceRequested = TRUE;
      break;

    case PciBarTypePMem64:

      Node = CreateResourceNode (
              PciDev,
              (PciDev->PciBar)[Index].Length,
              (PciDev->PciBar)[Index].Alignment,
              Index,
              PciBarTypePMem64,
              PciResUsageTypical
              );

      InsertResourceNode (
        PMem64Node,
        Node
        );

      ResourceRequested = TRUE;
      break;

    case PciBarTypePMem32:

      Node = CreateResourceNode (
              PciDev,
              (PciDev->PciBar)[Index].Length,
              (PciDev->PciBar)[Index].Alignment,
              Index,
              PciBarTypePMem32,
              PciResUsageTypical
              );

      InsertResourceNode (
        PMem32Node,
        Node
        );
      ResourceRequested = TRUE;
      break;

    case PciBarTypeIo16:
    case PciBarTypeIo32:

      Node = CreateResourceNode (
              PciDev,
              (PciDev->PciBar)[Index].Length,
              (PciDev->PciBar)[Index].Alignment,
              Index,
              PciBarTypeIo16,
              PciResUsageTypical
              );

      InsertResourceNode (
        IoNode,
        Node
        );
      ResourceRequested = TRUE;
      break;

    case PciBarTypeUnknown:
      break;

    default:
      break;
    }
  }

  //
  // If there is no resource requested from this device,
  // then we indicate this device has been allocated naturally.
  //
  if (!ResourceRequested) {
    PciDev->Allocated = TRUE;
  }

  return EFI_SUCCESS;
}

PCI_RESOURCE_NODE *
CreateResourceNode (
  IN PCI_IO_DEVICE         *PciDev,
  IN UINT64                Length,
  IN UINT64                Alignment,
  IN UINT8                 Bar,
  IN PCI_BAR_TYPE          ResType,
  IN PCI_RESOURCE_USAGE    ResUsage
  )
/*++

Routine Description:

  This function is used to create a resource node

Arguments:

Returns:

  None

--*/
// TODO:    PciDev - add argument and description to function comment
// TODO:    Length - add argument and description to function comment
// TODO:    Alignment - add argument and description to function comment
// TODO:    Bar - add argument and description to function comment
// TODO:    ResType - add argument and description to function comment
// TODO:    ResUsage - add argument and description to function comment
{
  PCI_RESOURCE_NODE *Node;

  Node    = NULL;

  Node    = AllocatePool (sizeof (PCI_RESOURCE_NODE));
  if (Node == NULL) {
    return NULL;
  }

  ZeroMem (Node, sizeof (PCI_RESOURCE_NODE));

  Node->Signature     = PCI_RESOURCE_SIGNATURE;
  Node->PciDev        = PciDev;
  Node->Length        = Length;
  Node->Alignment     = Alignment;
  Node->Bar           = Bar;
  Node->ResType       = ResType;
  Node->Reserved      = FALSE;
  Node->ResourceUsage = ResUsage;
  InitializeListHead (&Node->ChildList);
  return Node;
}

EFI_STATUS
CreateResourceMap (
  IN PCI_IO_DEVICE     *Bridge,
  IN PCI_RESOURCE_NODE *IoNode,
  IN PCI_RESOURCE_NODE *Mem32Node,
  IN PCI_RESOURCE_NODE *PMem32Node,
  IN PCI_RESOURCE_NODE *Mem64Node,
  IN PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

  This routine is used to extract resource request from
  device node list.

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    IoNode - add argument and description to function comment
// TODO:    Mem32Node - add argument and description to function comment
// TODO:    PMem32Node - add argument and description to function comment
// TODO:    Mem64Node - add argument and description to function comment
// TODO:    PMem64Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  PCI_IO_DEVICE     *Temp;
  PCI_RESOURCE_NODE *IoBridge;
  PCI_RESOURCE_NODE *Mem32Bridge;
  PCI_RESOURCE_NODE *PMem32Bridge;
  PCI_RESOURCE_NODE *Mem64Bridge;
  PCI_RESOURCE_NODE *PMem64Bridge;
  LIST_ENTRY        *CurrentLink;

  CurrentLink = Bridge->ChildList.ForwardLink;

  while (CurrentLink && CurrentLink != &Bridge->ChildList) {

    Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);

    //
    // Create resource nodes for this device by scanning the
    // Bar array in the device private data
    // If the upstream bridge doesn't support this device,
    // no any resource node will be created for this device
    //
    GetResourceFromDevice (
      Temp,
      IoNode,
      Mem32Node,
      PMem32Node,
      Mem64Node,
      PMem64Node
      );

    if (IS_PCI_BRIDGE (&Temp->Pci)) {

      //
      // If the device has children, create a bridge resource node for this PPB
      // Note: For PPB, memory aperture is aligned with 1MB and IO aperture
      // is aligned with 4KB
      // This device is typically a bridge device like PPB and P2C
      //
      IoBridge = CreateResourceNode (
                  Temp,
                  0,
                  0xFFF,
                  PPB_IO_RANGE,
                  PciBarTypeIo16,
                  PciResUsageTypical
                  ); //0x1000 aligned
      
      Mem32Bridge = CreateResourceNode (
                      Temp,
                      0,
                      0xFFFFF,
                      PPB_MEM32_RANGE,
                      PciBarTypeMem32,
                      PciResUsageTypical
                      );

      PMem32Bridge = CreateResourceNode (
                      Temp,
                      0,
                      0xFFFFF,
                      PPB_PMEM32_RANGE,
                      PciBarTypePMem32,
                      PciResUsageTypical
                      );

      Mem64Bridge = CreateResourceNode (
                      Temp,
                      0,
                      0xFFFFF,
                      PPB_MEM64_RANGE,
                      PciBarTypeMem64,
                      PciResUsageTypical
                      );

      PMem64Bridge = CreateResourceNode (
                      Temp,
                      0,
                      0xFFFFF,
                      PPB_PMEM64_RANGE,
                      PciBarTypePMem64,
                      PciResUsageTypical
                      );

      //
      // Recursively create resouce map on this bridge
      //
      CreateResourceMap (
        Temp,
        IoBridge,
        Mem32Bridge,
        PMem32Bridge,
        Mem64Bridge,
        PMem64Bridge
        );

      if (ResourceRequestExisted (IoBridge)) {
        InsertResourceNode (
          IoNode,
          IoBridge
          );
      } else {
        gBS->FreePool (IoBridge);
        IoBridge = NULL;
      }

      //
      // If there is node under this resource bridge,
      // then calculate bridge's aperture of this type
      // and insert it into the respective resource tree.
      // If no, delete this resource bridge
      //
      if (ResourceRequestExisted (Mem32Bridge)) {
        InsertResourceNode (
          Mem32Node,
          Mem32Bridge
          );
      } else {
        gBS->FreePool (Mem32Bridge);
        Mem32Bridge = NULL;
      }

      //
      // If there is node under this resource bridge,
      // then calculate bridge's aperture of this type
      // and insert it into the respective resource tree.
      // If no, delete this resource bridge
      //
      if (ResourceRequestExisted (PMem32Bridge)) {
        InsertResourceNode (
          PMem32Node,
          PMem32Bridge
          );
      } else {
        gBS->FreePool (PMem32Bridge);
        PMem32Bridge = NULL;
      }

      //
      // If there is node under this resource bridge,
      // then calculate bridge's aperture of this type
      // and insert it into the respective resource tree.
      // If no, delete this resource bridge
      //
      if (ResourceRequestExisted (Mem64Bridge)) {
        InsertResourceNode (
          Mem64Node,
          Mem64Bridge
          );
      } else {
        gBS->FreePool (Mem64Bridge);
        Mem64Bridge = NULL;
      }

      //
      // If there is node under this resource bridge,
      // then calculate bridge's aperture of this type
      // and insert it into the respective resource tree.
      // If no, delete this resource bridge
      //
      if (ResourceRequestExisted (PMem64Bridge)) {
        InsertResourceNode (
          PMem64Node,
          PMem64Bridge
          );
      } else {
        gBS->FreePool (PMem64Bridge);
        PMem64Bridge = NULL;
      }

    }

    //
    // If it is P2C, apply hard coded resource padding
    //
    //
    if (IS_CARDBUS_BRIDGE (&Temp->Pci)) {
      ResourcePaddingForCardBusBridge (
        Temp,
        IoNode,
        Mem32Node,
        PMem32Node,
        Mem64Node,
        PMem64Node
        );
    }

    CurrentLink = CurrentLink->ForwardLink;
  }
  //
  //
  // To do some platform specific resource padding ...
  //
  ResourcePaddingPolicy (
    Bridge,
    IoNode,
    Mem32Node,
    PMem32Node,
    Mem64Node,
    PMem64Node
    );

  //
  // Degrade resource if necessary
  //
  DegradeResource (
    Bridge,
    Mem32Node,
    PMem32Node,
    Mem64Node,
    PMem64Node
    );

  //
  // Calculate resource aperture for this bridge device
  //
  CalculateResourceAperture (Mem32Node);
  CalculateResourceAperture (PMem32Node);
  CalculateResourceAperture (Mem64Node);
  CalculateResourceAperture (PMem64Node);
  CalculateResourceAperture (IoNode);

  return EFI_SUCCESS;

}

EFI_STATUS
ResourcePaddingPolicy (
  PCI_IO_DEVICE     *PciDev,
  PCI_RESOURCE_NODE *IoNode,
  PCI_RESOURCE_NODE *Mem32Node,
  PCI_RESOURCE_NODE *PMem32Node,
  PCI_RESOURCE_NODE *Mem64Node,
  PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

  This function is used to do the resource padding for a specific platform

Arguments:

  PciDev        - A pointer to the PCI_IO_DEVICE structrue.    
  IoNode        - A pointer to the PCI_RESOURCE_NODE structrue.
  Mem32Node     - A pointer to the PCI_RESOURCE_NODE structrue.
  PMem32Node    - A pointer to the PCI_RESOURCE_NODE structrue.
  Mem64Node     - A pointer to the PCI_RESOURCE_NODE structrue.
  PMem64Node    - A pointer to the PCI_RESOURCE_NODE structrue.

Returns:
  Status code

  None

--*/
// TODO:    EFI_SUCCESS - add return value to function comment
{
  //
  // Create padding resource node
  //
  if (PciDev->ResourcePaddingDescriptors != NULL) {
    ApplyResourcePadding (
      PciDev,
      IoNode,
      Mem32Node,
      PMem32Node,
      Mem64Node,
      PMem64Node
      );
  }

  return EFI_SUCCESS;

}

EFI_STATUS
DegradeResource (
  IN PCI_IO_DEVICE     *Bridge,
  IN PCI_RESOURCE_NODE *Mem32Node,
  IN PCI_RESOURCE_NODE *PMem32Node,
  IN PCI_RESOURCE_NODE *Mem64Node,
  IN PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

  This function is used to degrade resource if the upstream bridge 
  doesn't support certain resource. Degradation path is 
  PMEM64 -> MEM64  -> MEM32
  PMEM64 -> PMEM32 -> MEM32
  IO32   -> IO16

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    Mem32Node - add argument and description to function comment
// TODO:    PMem32Node - add argument and description to function comment
// TODO:    Mem64Node - add argument and description to function comment
// TODO:    PMem64Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  //
  // If bridge doesn't support Prefetchable
  // memory64, degrade it to Prefetchable memory32
  //
  if (!BridgeSupportResourceDecode (Bridge, EFI_BRIDGE_PMEM64_DECODE_SUPPORTED)) {
    MergeResourceTree (
      PMem32Node,
      PMem64Node,
      TRUE
      );
  } else {
    //
    // if no PMem32 request, still keep PMem64. Otherwise degrade to PMem32
    //
    if (PMem32Node != NULL) {
      MergeResourceTree (
        PMem32Node,
        PMem64Node,
        TRUE
        );
    }
  }


  //
  // If bridge doesn't support Mem64
  // degrade it to mem32
  //
  if (!BridgeSupportResourceDecode (Bridge, EFI_BRIDGE_MEM64_DECODE_SUPPORTED)) {
    MergeResourceTree (
      Mem32Node,
      Mem64Node,
      TRUE
      );
  }

  //
  // If bridge doesn't support Pmem32
  // degrade it to mem32
  //
  if (!BridgeSupportResourceDecode (Bridge, EFI_BRIDGE_PMEM32_DECODE_SUPPORTED)) {
    MergeResourceTree (
      Mem32Node,
      PMem32Node,
      TRUE
      );
  }

  //
  // if bridge supports combined Pmem Mem decoding
  // merge these two type of resource
  //
  if (BridgeSupportResourceDecode (Bridge, EFI_BRIDGE_PMEM_MEM_COMBINE_SUPPORTED)) {
    MergeResourceTree (
      Mem32Node,
      PMem32Node,
      FALSE
      );

    MergeResourceTree (
      Mem64Node,
      PMem64Node,
      FALSE
      );
  }

  return EFI_SUCCESS;
}

BOOLEAN
BridgeSupportResourceDecode (
  IN PCI_IO_DEVICE *Bridge,
  IN UINT32        Decode
  )
/*++

Routine Description:

  TODO: Add function description

Arguments:

  Bridge  - TODO: add argument description
  Decode  - TODO: add argument description

Returns:

  TODO: add return values

--*/
{
  /*++

Routine Description:

Arguments:

Returns:
  
  None

--*/
  if ((Bridge->Decodes) & Decode) {
    return TRUE;
  }

  return FALSE;
}

EFI_STATUS
ProgramResource (
  IN UINT64            Base,
  IN PCI_RESOURCE_NODE *Bridge
  )
/*++

Routine Description:

  This function is used to program the resource allocated 
  for each resource node

Arguments:

Returns:

  None

--*/
// TODO:    Base - add argument and description to function comment
// TODO:    Bridge - add argument and description to function comment
// TODO:    EFI_OUT_OF_RESOURCES - add return value to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  LIST_ENTRY        *CurrentLink;
  PCI_RESOURCE_NODE *Node;
  EFI_STATUS        Status;

  if (Base == gAllOne) {
    return EFI_OUT_OF_RESOURCES;
  }

  CurrentLink = Bridge->ChildList.ForwardLink;

  while (CurrentLink != &Bridge->ChildList) {

    Node = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (!IS_PCI_BRIDGE (&(Node->PciDev->Pci))) {

      if (IS_CARDBUS_BRIDGE (&(Node->PciDev->Pci))) {
        ProgramP2C (Base, Node);
      } else {
        ProgramBar (Base, Node);
      }
    } else {
      Status = ProgramResource (Base + Node->Offset, Node);

      if (EFI_ERROR (Status)) {
        return Status;
      }

      ProgramPpbApperture (Base, Node);
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
ProgramBar (
  IN UINT64            Base,
  IN PCI_RESOURCE_NODE *Node
  )
/*++

Routine Description:

Arguments:

Returns:
  
  None

--*/
// TODO:    Base - add argument and description to function comment
// TODO:    Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT64              Address;
  UINT32              Address32;

  Address = 0;
  PciIo   = &(Node->PciDev->PciIo);

  Address = Base + Node->Offset;

  //
  // Indicate pci bus driver has allocated
  // resource for this device
  // It might be a temporary solution here since
  // pci device could have multiple bar
  //
  Node->PciDev->Allocated = TRUE;

  switch ((Node->PciDev->PciBar[Node->Bar]).BarType) {

  case PciBarTypeIo16:
  case PciBarTypeIo32:
  case PciBarTypeMem32:
  case PciBarTypePMem32:

    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                (Node->PciDev->PciBar[Node->Bar]).Offset,
                1,
                &Address
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;

    break;

  case PciBarTypeMem64:
  case PciBarTypePMem64:

    Address32 = (UINT32) (Address & 0x00000000FFFFFFFF);

    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                (Node->PciDev->PciBar[Node->Bar]).Offset,
                1,
                &Address32
                );

    Address32 = (UINT32) RShiftU64 (Address, 32);

    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                (UINT8) ((Node->PciDev->PciBar[Node->Bar]).Offset + 4),
                1,
                &Address32
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;

    break;

  default:
    break;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
ProgramPpbApperture (
  IN UINT64            Base,
  IN PCI_RESOURCE_NODE *Node
  )
/*++

Routine Description:

Arguments:

Returns:
  
  None

--*/
// TODO:    Base - add argument and description to function comment
// TODO:    Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT64              Address;
  UINT32              Address32;

  Address = 0;
  //
  // if no device south of this PPB, return anyway
  // Apperture is set default in the initialization code
  //
  if (Node->Length == 0 || Node->ResourceUsage == PciResUsagePadding) {
    //
    // For padding resource node, just ignore when programming
    //
    return EFI_SUCCESS;
  }

  PciIo   = &(Node->PciDev->PciIo);
  Address = Base + Node->Offset;

  //
  // Indicate the PPB resource has been allocated
  //
  Node->PciDev->Allocated = TRUE;

  switch (Node->Bar) {

  case PPB_BAR_0:
  case PPB_BAR_1:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                (Node->PciDev->PciBar[Node->Bar]).Offset,
                1,
                &Address
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;

    break;

  case PPB_IO_RANGE:

    Address32 = ((UINT32) (Address)) >> 8;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint8,
                0x1C,
                1,
                &Address32
                );

    Address32 >>= 8;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x30,
                1,
                &Address32
                );

    Address32 = (UINT32) (Address + Node->Length - 1);
    Address32 = ((UINT32) (Address32)) >> 8;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint8,
                0x1D,
                1,
                &Address32
                );

    Address32 >>= 8;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x32,
                1,
                &Address32
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    break;

  case PPB_MEM32_RANGE:

    Address32 = ((UINT32) (Address)) >> 16;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x20,
                1,
                &Address32
                );

    Address32 = (UINT32) (Address + Node->Length - 1);
    Address32 = ((UINT32) (Address32)) >> 16;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x22,
                1,
                &Address32
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    break;

  case PPB_PMEM32_RANGE:
  case PPB_PMEM64_RANGE:

    Address32 = ((UINT32) (Address)) >> 16;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x24,
                1,
                &Address32
                );

    Address32 = (UINT32) (Address + Node->Length - 1);
    Address32 = ((UINT32) (Address32)) >> 16;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint16,
                0x26,
                1,
                &Address32
                );

    Address32 = (UINT32) RShiftU64 (Address, 32);
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x28,
                1,
                &Address32
                );

    Address32 = (UINT32) RShiftU64 ((Address + Node->Length - 1), 32);
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x2C,
                1,
                &Address32
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    break;

  default:
    break;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
ProgrameUpstreamBridgeForRom (
  IN PCI_IO_DEVICE   *PciDevice,
  IN UINT32          OptionRomBase,
  IN BOOLEAN         Enable
  )
/*++

Routine Description:

Arguments:

Returns:

--*/
// TODO:    PciDevice - add argument and description to function comment
// TODO:    OptionRomBase - add argument and description to function comment
// TODO:    Enable - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  PCI_IO_DEVICE     *Parent;
  PCI_RESOURCE_NODE Node;
  //
  // For root bridge, just return.
  //
  Parent = PciDevice->Parent;
  ZeroMem (&Node, sizeof (Node));
  while (Parent) {
    if (!IS_PCI_BRIDGE (&Parent->Pci)) {
      break;
    }

    Node.PciDev     = Parent;
    Node.Length     = PciDevice->RomSize;
    Node.Alignment  = 0;
    Node.Bar        = PPB_MEM32_RANGE;
    Node.ResType    = PciBarTypeMem32;
    Node.Offset     = 0;

    //
    // Program PPB to only open a single <= 16<MB apperture
    //
    if (Enable) {
      ProgramPpbApperture (OptionRomBase, &Node);
      PciEnableCommandRegister (Parent, EFI_PCI_COMMAND_MEMORY_SPACE);
    } else {
      InitializePpb (Parent);
      PciDisableCommandRegister (Parent, EFI_PCI_COMMAND_MEMORY_SPACE);
    }

    Parent = Parent->Parent;
  }

  return EFI_SUCCESS;
}

BOOLEAN
ResourceRequestExisted (
  IN PCI_RESOURCE_NODE *Bridge
  )
/*++

Routine Description:

Arguments:

  Bridge      - A pointer to the PCI_RESOURCE_NODE.

Returns:

  None

--*/
{
  if (Bridge != NULL) {
    if (!IsListEmpty (&Bridge->ChildList) || Bridge->Length != 0) {
      return TRUE;
    }
  }

  return FALSE;
}

EFI_STATUS
InitializeResourcePool (
  PCI_RESOURCE_NODE   *ResourcePool,
  PCI_BAR_TYPE        ResourceType
  )
/*++

Routine Description:

Arguments:

Returns:

  None

--*/
// TODO:    ResourcePool - add argument and description to function comment
// TODO:    ResourceType - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  ZeroMem (ResourcePool, sizeof (PCI_RESOURCE_NODE));
  ResourcePool->ResType   = ResourceType;
  ResourcePool->Signature = PCI_RESOURCE_SIGNATURE;
  InitializeListHead (&ResourcePool->ChildList);

  return EFI_SUCCESS;
}

EFI_STATUS
GetResourceMap (
  PCI_IO_DEVICE      *PciDev,
  PCI_RESOURCE_NODE  **IoBridge,
  PCI_RESOURCE_NODE  **Mem32Bridge,
  PCI_RESOURCE_NODE  **PMem32Bridge,
  PCI_RESOURCE_NODE  **Mem64Bridge,
  PCI_RESOURCE_NODE  **PMem64Bridge,
  PCI_RESOURCE_NODE  *IoPool,
  PCI_RESOURCE_NODE  *Mem32Pool,
  PCI_RESOURCE_NODE  *PMem32Pool,
  PCI_RESOURCE_NODE  *Mem64Pool,
  PCI_RESOURCE_NODE  *PMem64Pool
  )
/*++

Routine Description:

Arguments:

Returns:

  None

--*/
// TODO:    PciDev - add argument and description to function comment
// TODO:    IoBridge - add argument and description to function comment
// TODO:    Mem32Bridge - add argument and description to function comment
// TODO:    PMem32Bridge - add argument and description to function comment
// TODO:    Mem64Bridge - add argument and description to function comment
// TODO:    PMem64Bridge - add argument and description to function comment
// TODO:    IoPool - add argument and description to function comment
// TODO:    Mem32Pool - add argument and description to function comment
// TODO:    PMem32Pool - add argument and description to function comment
// TODO:    Mem64Pool - add argument and description to function comment
// TODO:    PMem64Pool - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{

  PCI_RESOURCE_NODE *Temp;
  LIST_ENTRY        *CurrentLink;

  CurrentLink = IoPool->ChildList.ForwardLink;

  //
  // Get Io resource map
  //
  while (CurrentLink != &IoPool->ChildList) {

    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (Temp->PciDev == PciDev) {
      *IoBridge = Temp;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // Get Mem32 resource map
  //
  CurrentLink = Mem32Pool->ChildList.ForwardLink;

  while (CurrentLink != &Mem32Pool->ChildList) {

    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (Temp->PciDev == PciDev) {
      *Mem32Bridge = Temp;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // Get Pmem32 resource map
  //
  CurrentLink = PMem32Pool->ChildList.ForwardLink;

  while (CurrentLink != &PMem32Pool->ChildList) {

    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (Temp->PciDev == PciDev) {
      *PMem32Bridge = Temp;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // Get Mem64 resource map
  //
  CurrentLink = Mem64Pool->ChildList.ForwardLink;

  while (CurrentLink != &Mem64Pool->ChildList) {

    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (Temp->PciDev == PciDev) {
      *Mem64Bridge = Temp;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  //
  // Get Pmem64 resource map
  //
  CurrentLink = PMem64Pool->ChildList.ForwardLink;

  while (CurrentLink != &PMem64Pool->ChildList) {

    Temp = RESOURCE_NODE_FROM_LINK (CurrentLink);

    if (Temp->PciDev == PciDev) {
      *PMem64Bridge = Temp;
    }

    CurrentLink = CurrentLink->ForwardLink;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
DestroyResourceTree (
  IN PCI_RESOURCE_NODE *Bridge
  )
/*++

Routine Description:

Arguments:

Returns:

  None

--*/
// TODO:    Bridge - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  PCI_RESOURCE_NODE *Temp;
  LIST_ENTRY        *CurrentLink;

  while (!IsListEmpty (&Bridge->ChildList)) {

    CurrentLink = Bridge->ChildList.ForwardLink;

    Temp        = RESOURCE_NODE_FROM_LINK (CurrentLink);

    RemoveEntryList (CurrentLink);

    if (IS_PCI_BRIDGE (&(Temp->PciDev->Pci))) {
      DestroyResourceTree (Temp);
    }

    gBS->FreePool (Temp);
  }

  return EFI_SUCCESS;
}

EFI_STATUS
RecordReservedResource (
  IN UINT64         Base,
  IN UINT64         Length,
  IN PCI_BAR_TYPE   ResType,
  IN PCI_IO_DEVICE  *Bridge
  )
/*++

Routine Description:
  
Arguments:

Returns:

  None

--*/
// TODO:    Base - add argument and description to function comment
// TODO:    Length - add argument and description to function comment
// TODO:    ResType - add argument and description to function comment
// TODO:    Bridge - add argument and description to function comment
// TODO:    EFI_OUT_OF_RESOURCES - add return value to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  PCI_RESERVED_RESOURCE_LIST  *ReservedNode;

  ReservedNode = AllocatePool (sizeof (PCI_RESERVED_RESOURCE_LIST));
  if (ReservedNode == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  ReservedNode->Signature     = RESERVED_RESOURCE_SIGNATURE;
  ReservedNode->Node.Base     = Base;
  ReservedNode->Node.Length   = Length;
  ReservedNode->Node.ResType  = ResType;

  InsertTailList (&Bridge->ReservedResourceList, &(ReservedNode->Link));

  return EFI_SUCCESS;
}

EFI_STATUS
ResourcePaddingForCardBusBridge (
  PCI_IO_DEVICE     *PciDev,
  PCI_RESOURCE_NODE *IoNode,
  PCI_RESOURCE_NODE *Mem32Node,
  PCI_RESOURCE_NODE *PMem32Node,
  PCI_RESOURCE_NODE *Mem64Node,
  PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

Arguments:

Returns:

  None

--*/
// TODO:    PciDev - add argument and description to function comment
// TODO:    IoNode - add argument and description to function comment
// TODO:    Mem32Node - add argument and description to function comment
// TODO:    PMem32Node - add argument and description to function comment
// TODO:    Mem64Node - add argument and description to function comment
// TODO:    PMem64Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  PCI_RESOURCE_NODE *Node;

  Node = NULL;

  //
  // Memory Base/Limit Register 0
  // Bar 1 denodes memory range 0
  //
  Node = CreateResourceNode (
          PciDev,
          0x2000000,
          0x1ffffff,
          1,
          PciBarTypeMem32,
          PciResUsagePadding
          );

  InsertResourceNode (
    Mem32Node,
    Node
    );

  //
  // Memory Base/Limit Register 1
  // Bar 2 denodes memory range1
  //
  Node = CreateResourceNode (
          PciDev,
          0x2000000,
          0x1ffffff,
          2,
          PciBarTypePMem32,
          PciResUsagePadding
          );

  InsertResourceNode (
    PMem32Node,
    Node
    );

  //
  // Io Base/Limit
  // Bar 3 denodes io range 0
  //
  Node = CreateResourceNode (
          PciDev,
          0x100,
          0xff,
          3,
          PciBarTypeIo16,
          PciResUsagePadding
          );

  InsertResourceNode (
    IoNode,
    Node
    );

  //
  // Io Base/Limit
  // Bar 4 denodes io range 0
  //
  Node = CreateResourceNode (
          PciDev,
          0x100,
          0xff,
          4,
          PciBarTypeIo16,
          PciResUsagePadding
          );

  InsertResourceNode (
    IoNode,
    Node
    );

  return EFI_SUCCESS;
}

EFI_STATUS
ProgramP2C (
  IN UINT64            Base,
  IN PCI_RESOURCE_NODE *Node
  )
/*++

Routine Description:

Arguments:

Returns:
  
  None

--*/
// TODO:    Base - add argument and description to function comment
// TODO:    Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  EFI_PCI_IO_PROTOCOL *PciIo;
  UINT64              Address;
  UINT64              TempAddress;
  UINT16              BridgeControl;

  Address = 0;
  PciIo   = &(Node->PciDev->PciIo);

  Address = Base + Node->Offset;

  //
  // Indicate pci bus driver has allocated
  // resource for this device
  // It might be a temporary solution here since
  // pci device could have multiple bar
  //
  Node->PciDev->Allocated = TRUE;

  switch (Node->Bar) {

  case P2C_BAR_0:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                (Node->PciDev->PciBar[Node->Bar]).Offset,
                1,
                &Address
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    break;

  case P2C_MEM_1:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x1c,
                1,
                &Address
                );

    TempAddress = Address + Node->Length - 1;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x20,
                1,
                &TempAddress
                );

    if (Node->ResType == PciBarTypeMem32) {

      //
      // Set non-prefetchable bit
      //
      PciIoRead (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );

      BridgeControl &= 0xfeff;
      PciIoWrite (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );

    } else {

      //
      // Set pre-fetchable bit
      //
      PciIoRead (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );

      BridgeControl |= 0x0100;
      PciIoWrite (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );
    }

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    Node->PciDev->PciBar[Node->Bar].BarType     = Node->ResType;

    break;

  case P2C_MEM_2:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x24,
                1,
                &Address
                );

    TempAddress = Address + Node->Length - 1;

    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x28,
                1,
                &TempAddress
                );

    if (Node->ResType == PciBarTypeMem32) {

      //
      // Set non-prefetchable bit
      //
      PciIoRead (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );

      BridgeControl &= 0xfdff;
      PciIoWrite (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );
    } else {

      //
      // Set pre-fetchable bit
      //
      PciIoRead (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );

      BridgeControl |= 0x0200;
      PciIoWrite (
                  PciIo,
                  EfiPciIoWidthUint16,
                  0x3e,
                  1,
                  &BridgeControl
                  );
    }

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    Node->PciDev->PciBar[Node->Bar].BarType     = Node->ResType;
    break;

  case P2C_IO_1:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x2c,
                1,
                &Address
                );
    TempAddress = Address + Node->Length - 1;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x30,
                1,
                &TempAddress
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    Node->PciDev->PciBar[Node->Bar].BarType     = Node->ResType;

    break;

  case P2C_IO_2:
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x34,
                1,
                &Address
                );

    TempAddress = Address + Node->Length - 1;
    PciIoWrite (
                PciIo,
                EfiPciIoWidthUint32,
                0x38,
                1,
                &TempAddress
                );

    Node->PciDev->PciBar[Node->Bar].BaseAddress = Address;
    Node->PciDev->PciBar[Node->Bar].Length      = Node->Length;
    Node->PciDev->PciBar[Node->Bar].BarType     = Node->ResType;
    break;

  default:
    break;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
ApplyResourcePadding (
  PCI_IO_DEVICE     *PciDev,
  PCI_RESOURCE_NODE *IoNode,
  PCI_RESOURCE_NODE *Mem32Node,
  PCI_RESOURCE_NODE *PMem32Node,
  PCI_RESOURCE_NODE *Mem64Node,
  PCI_RESOURCE_NODE *PMem64Node
  )
/*++

Routine Description:

Arguments:

Returns:
  
  None

--*/
// TODO:    PciDev - add argument and description to function comment
// TODO:    IoNode - add argument and description to function comment
// TODO:    Mem32Node - add argument and description to function comment
// TODO:    PMem32Node - add argument and description to function comment
// TODO:    Mem64Node - add argument and description to function comment
// TODO:    PMem64Node - add argument and description to function comment
// TODO:    EFI_SUCCESS - add return value to function comment
{
  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
  PCI_RESOURCE_NODE                 *Node;
  UINT8                             DummyBarIndex;

  DummyBarIndex = 0;
  Ptr           = PciDev->ResourcePaddingDescriptors;

  while (((EFI_ACPI_END_TAG_DESCRIPTOR *) Ptr)->Desc != ACPI_END_TAG_DESCRIPTOR) {

    if (Ptr->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Ptr->ResType == ACPI_ADDRESS_SPACE_TYPE_IO) {
      if (Ptr->AddrLen != 0) {

        Node = CreateResourceNode (
                PciDev,
                Ptr->AddrLen,
                Ptr->AddrRangeMax,
                DummyBarIndex,
                PciBarTypeIo16,
                PciResUsagePadding
                );
        InsertResourceNode (
          IoNode,
          Node
          );
      }

      Ptr++;
      continue;
    }

    if (Ptr->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Ptr->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {

      if (Ptr->AddrSpaceGranularity == 32) {

        //
        // prefechable
        //
        if (Ptr->SpecificFlag == 0x6) {
          if (Ptr->AddrLen) {
            Node = CreateResourceNode (
                    PciDev,
                    Ptr->AddrLen,
                    Ptr->AddrRangeMax,
                    DummyBarIndex,
                    PciBarTypePMem32,
                    PciResUsagePadding
                    );
            InsertResourceNode (
              PMem32Node,
              Node
              );
          }

          Ptr++;
          continue;
        }

        //
        // Non-prefechable
        //
        if (Ptr->SpecificFlag == 0) {
          if (Ptr->AddrLen) {
            Node = CreateResourceNode (
                    PciDev,
                    Ptr->AddrLen,
                    Ptr->AddrRangeMax,
                    DummyBarIndex,
                    PciBarTypeMem32,
                    PciResUsagePadding
                    );
            InsertResourceNode (
              Mem32Node,
              Node
              );
          }

          Ptr++;
          continue;
        }
      }

      if (Ptr->AddrSpaceGranularity == 64) {

        //
        // prefechable
        //
        if (Ptr->SpecificFlag == 0x6) {
          if (Ptr->AddrLen) {
            Node = CreateResourceNode (
                    PciDev,
                    Ptr->AddrLen,
                    Ptr->AddrRangeMax,
                    DummyBarIndex,
                    PciBarTypePMem64,
                    PciResUsagePadding
                    );
            InsertResourceNode (
              PMem64Node,
              Node
              );
          }

          Ptr++;
          continue;
        }

        //
        // Non-prefechable
        //
        if (Ptr->SpecificFlag == 0) {
          if (Ptr->AddrLen) {
            Node = CreateResourceNode (
                    PciDev,
                    Ptr->AddrLen,
                    Ptr->AddrRangeMax,
                    DummyBarIndex,
                    PciBarTypeMem64,
                    PciResUsagePadding
                    );
            InsertResourceNode (
              Mem64Node,
              Node
              );
          }

          Ptr++;
          continue;
        }
      }
    }

    Ptr++;
  }

  return EFI_SUCCESS;
}

//
// Light PCI bus driver woundn't support hotplug root device
// So no need to pad resource for them
//
VOID
GetResourcePaddingPpb (
  IN  PCI_IO_DEVICE                  *PciIoDevice
  )
/*++

Routine Description:

  Get resource.

Arguments:

  PciIoDevice        A pointer to a pci device.

Returns:

  None

--*/
{
  if (gPciHotPlugInit) {
    if (PciIoDevice->ResourcePaddingDescriptors == NULL) {
      GetResourcePaddingForHpb (PciIoDevice);
    }
  }
}