/** @file This library provides helper functions to prevent integer overflow during type conversion, addition, subtraction, and multiplication. Copyright (c) 2017, Microsoft Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. **/ #include #include // // Magnitude of MIN_INT64 as expressed by a UINT64 number. // #define MIN_INT64_MAGNITUDE (((UINT64)(- (MIN_INT64 + 1))) + 1) // // Conversion functions // // There are three reasons for having conversion functions: // // 1. We are converting from a signed type to an unsigned type of the same // size, or vice-versa. // // 2. We are converting to a smaller type, and we could therefore possibly // overflow. // // 3. We are converting to a bigger type, and we are signed and the type we are // converting to is unsigned. // /** INT8 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToUint8 ( IN INT8 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT8 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToChar8 ( IN INT8 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT8 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToUint16 ( IN INT8 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT8 -> UINT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToUint32 ( IN INT8 Operand, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT32)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT8 -> UINTN conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINTN_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToUintn ( IN INT8 Operand, OUT UINTN *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINTN)Operand; Status = RETURN_SUCCESS; } else { *Result = UINTN_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT8 -> UINT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8ToUint64 ( IN INT8 Operand, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT64)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT8 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint8ToInt8 ( IN UINT8 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT8 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint8ToChar8 ( IN UINT8 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToInt8 ( IN INT16 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT8) && (Operand <= MAX_INT8)) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToChar8 ( IN INT16 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_INT8)) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToUint8 ( IN INT16 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT8)) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToUint16 ( IN INT16 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> UINT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToUint32 ( IN INT16 Operand, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT32)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> UINTN conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINTN_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToUintn ( IN INT16 Operand, OUT UINTN *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINTN)Operand; Status = RETURN_SUCCESS; } else { *Result = UINTN_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT16 -> UINT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16ToUint64 ( IN INT16 Operand, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT64)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16ToInt8 ( IN UINT16 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16ToChar8 ( IN UINT16 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16ToUint8 ( IN UINT16 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT8) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16ToInt16 ( IN UINT16 Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT16) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToInt8 ( IN INT32 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT8) && (Operand <= MAX_INT8)) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToChar8 ( IN INT32 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_INT8)) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToUint8 ( IN INT32 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT8)) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToInt16 ( IN INT32 Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT16) && (Operand <= MAX_INT16)) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToUint16 ( IN INT32 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT16)) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> UINT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToUint32 ( IN INT32 Operand, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT32)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT32 -> UINT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32ToUint64 ( IN INT32 Operand, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT64)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToInt8 ( IN UINT32 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToChar8 ( IN UINT32 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToUint8 ( IN UINT32 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT8) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToInt16 ( IN UINT32 Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT16) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToUint16 ( IN UINT32 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT16) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 -> INT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32ToInt32 ( IN UINT32 Operand, OUT INT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT32) { *Result = (INT32)Operand; Status = RETURN_SUCCESS; } else { *Result = INT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToInt8 ( IN INTN Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT8) && (Operand <= MAX_INT8)) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToChar8 ( IN INTN Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_INT8)) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToUint8 ( IN INTN Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT8)) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToInt16 ( IN INTN Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT16) && (Operand <= MAX_INT16)) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToUint16 ( IN INTN Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT16)) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> UINTN conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINTN_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToUintn ( IN INTN Operand, OUT UINTN *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINTN)Operand; Status = RETURN_SUCCESS; } else { *Result = UINTN_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INTN -> UINT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeIntnToUint64 ( IN INTN Operand, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT64)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToInt8 ( IN UINTN Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToChar8 ( IN UINTN Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToUint8 ( IN UINTN Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT8) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToInt16 ( IN UINTN Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT16) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToUint16 ( IN UINTN Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT16) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> INT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToInt32 ( IN UINTN Operand, OUT INT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT32) { *Result = (INT32)Operand; Status = RETURN_SUCCESS; } else { *Result = INT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINTN -> INTN conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INTN_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUintnToIntn ( IN UINTN Operand, OUT INTN *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INTN) { *Result = (INTN)Operand; Status = RETURN_SUCCESS; } else { *Result = INTN_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToInt8 ( IN INT64 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT8) && (Operand <= MAX_INT8)) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToChar8 ( IN INT64 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_INT8)) { *Result = (CHAR8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToUint8 ( IN INT64 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT8)) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToInt16 ( IN INT64 Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT16) && (Operand <= MAX_INT16)) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToUint16 ( IN INT64 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT16)) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> INT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToInt32 ( IN INT64 Operand, OUT INT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= MIN_INT32) && (Operand <= MAX_INT32)) { *Result = (INT32)Operand; Status = RETURN_SUCCESS; } else { *Result = INT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> UINT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToUint32 ( IN INT64 Operand, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Operand >= 0) && (Operand <= MAX_UINT32)) { *Result = (UINT32)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** INT64 -> UINT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64ToUint64 ( IN INT64 Operand, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand >= 0) { *Result = (UINT64)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> INT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToInt8 ( IN UINT64 Operand, OUT INT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = INT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> CHAR8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToChar8 ( IN UINT64 Operand, OUT CHAR8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT8) { *Result = (INT8)Operand; Status = RETURN_SUCCESS; } else { *Result = CHAR8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> UINT8 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToUint8 ( IN UINT64 Operand, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT8) { *Result = (UINT8)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> INT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToInt16 ( IN UINT64 Operand, OUT INT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT16) { *Result = (INT16)Operand; Status = RETURN_SUCCESS; } else { *Result = INT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> UINT16 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToUint16 ( IN UINT64 Operand, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT16) { *Result = (UINT16)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> INT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToInt32 ( IN UINT64 Operand, OUT INT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT32) { *Result = (INT32)Operand; Status = RETURN_SUCCESS; } else { *Result = INT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> UINT32 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToUint32 ( IN UINT64 Operand, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_UINT32) { *Result = (UINT32)Operand; Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> INTN conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INTN_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToIntn ( IN UINT64 Operand, OUT INTN *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INTN) { *Result = (INTN)Operand; Status = RETURN_SUCCESS; } else { *Result = INTN_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 -> INT64 conversion Converts the value specified by Operand to a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the conversion results in an overflow or an underflow condition, then Result is set to INT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Operand Operand to be converted to new type @param[out] Result Pointer to the result of conversion @retval RETURN_SUCCESS Successful conversion @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64ToInt64 ( IN UINT64 Operand, OUT INT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Operand <= MAX_INT64) { *Result = (INT64)Operand; Status = RETURN_SUCCESS; } else { *Result = INT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } // // Addition functions // /** UINT8 addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint8Add ( IN UINT8 Augend, IN UINT8 Addend, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (((UINT8)(Augend + Addend)) >= Augend) { *Result = (UINT8)(Augend + Addend); Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16Add ( IN UINT16 Augend, IN UINT16 Addend, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (((UINT16)(Augend + Addend)) >= Augend) { *Result = (UINT16)(Augend + Addend); Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32Add ( IN UINT32 Augend, IN UINT32 Addend, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Augend + Addend) >= Augend) { *Result = (Augend + Addend); Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64Add ( IN UINT64 Augend, IN UINT64 Addend, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if ((Augend + Addend) >= Augend) { *Result = (Augend + Addend); Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } // // Subtraction functions // /** UINT8 subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint8Sub ( IN UINT8 Minuend, IN UINT8 Subtrahend, OUT UINT8 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Minuend >= Subtrahend) { *Result = (UINT8)(Minuend - Subtrahend); Status = RETURN_SUCCESS; } else { *Result = UINT8_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT16 subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16Sub ( IN UINT16 Minuend, IN UINT16 Subtrahend, OUT UINT16 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Minuend >= Subtrahend) { *Result = (UINT16)(Minuend - Subtrahend); Status = RETURN_SUCCESS; } else { *Result = UINT16_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT32 subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32Sub ( IN UINT32 Minuend, IN UINT32 Subtrahend, OUT UINT32 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Minuend >= Subtrahend) { *Result = (Minuend - Subtrahend); Status = RETURN_SUCCESS; } else { *Result = UINT32_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } /** UINT64 subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64Sub ( IN UINT64 Minuend, IN UINT64 Subtrahend, OUT UINT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } if (Minuend >= Subtrahend) { *Result = (Minuend - Subtrahend); Status = RETURN_SUCCESS; } else { *Result = UINT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } return Status; } // // Multiplication functions // /** UINT8 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint8Mult ( IN UINT8 Multiplicand, IN UINT8 Multiplier, OUT UINT8 *Result ) { UINT32 IntermediateResult; IntermediateResult = ((UINT32)Multiplicand) *((UINT32)Multiplier); return SafeUint32ToUint8 (IntermediateResult, Result); } /** UINT16 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint16Mult ( IN UINT16 Multiplicand, IN UINT16 Multiplier, OUT UINT16 *Result ) { UINT32 IntermediateResult; IntermediateResult = ((UINT32)Multiplicand) *((UINT32)Multiplier); return SafeUint32ToUint16 (IntermediateResult, Result); } /** UINT32 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint32Mult ( IN UINT32 Multiplicand, IN UINT32 Multiplier, OUT UINT32 *Result ) { UINT64 IntermediateResult; IntermediateResult = ((UINT64) Multiplicand) *((UINT64) Multiplier); return SafeUint64ToUint32 (IntermediateResult, Result); } /** UINT64 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to UINT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeUint64Mult ( IN UINT64 Multiplicand, IN UINT64 Multiplier, OUT UINT64 *Result ) { RETURN_STATUS Status; UINT32 DwordA; UINT32 DwordB; UINT32 DwordC; UINT32 DwordD; UINT64 ProductAD; UINT64 ProductBC; UINT64 ProductBD; UINT64 UnsignedResult; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } ProductAD = 0; ProductBC = 0; ProductBD = 0; UnsignedResult = 0; Status = RETURN_BUFFER_TOO_SMALL; // // 64x64 into 128 is like 32.32 x 32.32. // // a.b * c.d = a*(c.d) + .b*(c.d) = a*c + a*.d + .b*c + .b*.d // back in non-decimal notation where A=a*2^32 and C=c*2^32: // A*C + A*d + b*C + b*d // So there are four components to add together. // result = (a*c*2^64) + (a*d*2^32) + (b*c*2^32) + (b*d) // // a * c must be 0 or there would be bits in the high 64-bits // a * d must be less than 2^32 or there would be bits in the high 64-bits // b * c must be less than 2^32 or there would be bits in the high 64-bits // then there must be no overflow of the resulting values summed up. // DwordA = (UINT32)(Multiplicand >> 32); DwordC = (UINT32)(Multiplier >> 32); // // common case -- if high dwords are both zero, no chance for overflow // if ((DwordA == 0) && (DwordC == 0)) { DwordB = (UINT32)Multiplicand; DwordD = (UINT32)Multiplier; *Result = (((UINT64)DwordB) *(UINT64)DwordD); Status = RETURN_SUCCESS; } else { // // a * c must be 0 or there would be bits set in the high 64-bits // if ((DwordA == 0) || (DwordC == 0)) { DwordD = (UINT32)Multiplier; // // a * d must be less than 2^32 or there would be bits set in the high 64-bits // ProductAD = (((UINT64)DwordA) *(UINT64)DwordD); if ((ProductAD & 0xffffffff00000000) == 0) { DwordB = (UINT32)Multiplicand; // // b * c must be less than 2^32 or there would be bits set in the high 64-bits // ProductBC = (((UINT64)DwordB) *(UINT64)DwordC); if ((ProductBC & 0xffffffff00000000) == 0) { // // now sum them all up checking for overflow. // shifting is safe because we already checked for overflow above // if (!RETURN_ERROR (SafeUint64Add (ProductBC << 32, ProductAD << 32, &UnsignedResult))) { // // b * d // ProductBD = (((UINT64)DwordB) *(UINT64)DwordD); if (!RETURN_ERROR (SafeUint64Add (UnsignedResult, ProductBD, &UnsignedResult))) { *Result = UnsignedResult; Status = RETURN_SUCCESS; } } } } } } if (RETURN_ERROR (Status)) { *Result = UINT64_ERROR; } return Status; } // // Signed operations // // Strongly consider using unsigned numbers. // // Signed numbers are often used where unsigned numbers should be used. // For example file sizes and array indices should always be unsigned. // Subtracting a larger positive signed number from a smaller positive // signed number with SafeInt32Sub will succeed, producing a negative number, // that then must not be used as an array index (but can occasionally be // used as a pointer index.) Similarly for adding a larger magnitude // negative number to a smaller magnitude positive number. // // This library does not protect you from such errors. It tells you if your // integer operations overflowed, not if you are doing the right thing // with your non-overflowed integers. // // Likewise you can overflow a buffer with a non-overflowed unsigned index. // // // Signed addition functions // /** INT8 Addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8Add ( IN INT8 Augend, IN INT8 Addend, OUT INT8 *Result ) { return SafeInt32ToInt8 (((INT32)Augend) + ((INT32)Addend), Result); } /** CHAR8 Addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeChar8Add ( IN CHAR8 Augend, IN CHAR8 Addend, OUT CHAR8 *Result ) { INT32 Augend32; INT32 Addend32; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } Augend32 = (INT32)Augend; Addend32 = (INT32)Addend; if (Augend32 < 0 || Augend32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } if (Addend32 < 0 || Addend32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } return SafeInt32ToChar8 (Augend32 + Addend32, Result); } /** INT16 Addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16Add ( IN INT16 Augend, IN INT16 Addend, OUT INT16 *Result ) { return SafeInt32ToInt16 (((INT32)Augend) + ((INT32)Addend), Result); } /** INT32 Addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32Add ( IN INT32 Augend, IN INT32 Addend, OUT INT32 *Result ) { return SafeInt64ToInt32 (((INT64)Augend) + ((INT64)Addend), Result); } /** INT64 Addition Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Augend A number to which addend will be added @param[in] Addend A number to be added to another @param[out] Result Pointer to the result of addition @retval RETURN_SUCCESS Successful addition @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64Add ( IN INT64 Augend, IN INT64 Addend, OUT INT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } // // * An Addend of zero can never cause underflow or overflow. // // * A positive Addend can only cause overflow. The overflow condition is // // (Augend + Addend) > MAX_INT64 // // Subtracting Addend from both sides yields // // Augend > (MAX_INT64 - Addend) // // This condition can be coded directly in C because the RHS will neither // underflow nor overflow. That is due to the starting condition: // // 0 < Addend <= MAX_INT64 // // Multiplying all three sides by (-1) yields // // 0 > (-Addend) >= (-MAX_INT64) // // Adding MAX_INT64 to all three sides yields // // MAX_INT64 > (MAX_INT64 - Addend) >= 0 // // * A negative Addend can only cause underflow. The underflow condition is // // (Augend + Addend) < MIN_INT64 // // Subtracting Addend from both sides yields // // Augend < (MIN_INT64 - Addend) // // This condition can be coded directly in C because the RHS will neither // underflow nor overflow. That is due to the starting condition: // // MIN_INT64 <= Addend < 0 // // Multiplying all three sides by (-1) yields // // (-MIN_INT64) >= (-Addend) > 0 // // Adding MIN_INT64 to all three sides yields // // 0 >= (MIN_INT64 - Addend) > MIN_INT64 // if (((Addend > 0) && (Augend > (MAX_INT64 - Addend))) || ((Addend < 0) && (Augend < (MIN_INT64 - Addend)))) { *Result = INT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } else { *Result = Augend + Addend; Status = RETURN_SUCCESS; } return Status; } // // Signed subtraction functions // /** INT8 Subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8Sub ( IN INT8 Minuend, IN INT8 Subtrahend, OUT INT8 *Result ) { return SafeInt32ToInt8 (((INT32)Minuend) - ((INT32)Subtrahend), Result); } /** CHAR8 Subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeChar8Sub ( IN CHAR8 Minuend, IN CHAR8 Subtrahend, OUT CHAR8 *Result ) { INT32 Minuend32; INT32 Subtrahend32; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } Minuend32 = (INT32)Minuend; Subtrahend32 = (INT32)Subtrahend; if (Minuend32 < 0 || Minuend32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } if (Subtrahend32 < 0 || Subtrahend32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } return SafeInt32ToChar8 (Minuend32 - Subtrahend32, Result); } /** INT16 Subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16Sub ( IN INT16 Minuend, IN INT16 Subtrahend, OUT INT16 *Result ) { return SafeInt32ToInt16 (((INT32)Minuend) - ((INT32)Subtrahend), Result); } /** INT32 Subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32Sub ( IN INT32 Minuend, IN INT32 Subtrahend, OUT INT32 *Result ) { return SafeInt64ToInt32 (((INT64)Minuend) - ((INT64)Subtrahend), Result); } /** INT64 Subtraction Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Minuend A number from which another is to be subtracted. @param[in] Subtrahend A number to be subtracted from another @param[out] Result Pointer to the result of subtraction @retval RETURN_SUCCESS Successful subtraction @retval RETURN_BUFFER_TOO_SMALL Underflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64Sub ( IN INT64 Minuend, IN INT64 Subtrahend, OUT INT64 *Result ) { RETURN_STATUS Status; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } // // * A Subtrahend of zero can never cause underflow or overflow. // // * A positive Subtrahend can only cause underflow. The underflow condition // is: // // (Minuend - Subtrahend) < MIN_INT64 // // Adding Subtrahend to both sides yields // // Minuend < (MIN_INT64 + Subtrahend) // // This condition can be coded directly in C because the RHS will neither // underflow nor overflow. That is due to the starting condition: // // 0 < Subtrahend <= MAX_INT64 // // Adding MIN_INT64 to all three sides yields // // MIN_INT64 < (MIN_INT64 + Subtrahend) <= (MIN_INT64 + MAX_INT64) = -1 // // * A negative Subtrahend can only cause overflow. The overflow condition is // // (Minuend - Subtrahend) > MAX_INT64 // // Adding Subtrahend to both sides yields // // Minuend > (MAX_INT64 + Subtrahend) // // This condition can be coded directly in C because the RHS will neither // underflow nor overflow. That is due to the starting condition: // // MIN_INT64 <= Subtrahend < 0 // // Adding MAX_INT64 to all three sides yields // // -1 = (MAX_INT64 + MIN_INT64) <= (MAX_INT64 + Subtrahend) < MAX_INT64 // if (((Subtrahend > 0) && (Minuend < (MIN_INT64 + Subtrahend))) || ((Subtrahend < 0) && (Minuend > (MAX_INT64 + Subtrahend)))) { *Result = INT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } else { *Result = Minuend - Subtrahend; Status = RETURN_SUCCESS; } return Status; } // // Signed multiplication functions // /** INT8 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt8Mult ( IN INT8 Multiplicand, IN INT8 Multiplier, OUT INT8 *Result ) { return SafeInt32ToInt8 (((INT32)Multiplier) *((INT32)Multiplicand), Result); } /** CHAR8 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to CHAR8_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeChar8Mult ( IN CHAR8 Multiplicand, IN CHAR8 Multiplier, OUT CHAR8 *Result ) { INT32 Multiplicand32; INT32 Multiplier32; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } Multiplicand32 = (INT32)Multiplicand; Multiplier32 = (INT32)Multiplier; if (Multiplicand32 < 0 || Multiplicand32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } if (Multiplier32 < 0 || Multiplier32 > MAX_INT8) { *Result = CHAR8_ERROR; return RETURN_BUFFER_TOO_SMALL; } return SafeInt32ToChar8 (Multiplicand32 * Multiplier32, Result); } /** INT16 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT16_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt16Mult ( IN INT16 Multiplicand, IN INT16 Multiplier, OUT INT16 *Result ) { return SafeInt32ToInt16 (((INT32)Multiplicand) *((INT32)Multiplier), Result); } /** INT32 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT32_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt32Mult ( IN INT32 Multiplicand, IN INT32 Multiplier, OUT INT32 *Result ) { return SafeInt64ToInt32 (((INT64)Multiplicand) *((INT64)Multiplier), Result); } /** INT64 multiplication Performs the requested operation using the input parameters into a value specified by Result type and stores the converted value into the caller allocated output buffer specified by Result. The caller must pass in a Result buffer that is at least as large as the Result type. If Result is NULL, RETURN_INVALID_PARAMETER is returned. If the requested operation results in an overflow or an underflow condition, then Result is set to INT64_ERROR and RETURN_BUFFER_TOO_SMALL is returned. @param[in] Multiplicand A number that is to be multiplied by another @param[in] Multiplier A number by which the multiplicand is to be multiplied @param[out] Result Pointer to the result of multiplication @retval RETURN_SUCCESS Successful multiplication @retval RETURN_BUFFER_TOO_SMALL Overflow @retval RETURN_INVALID_PARAMETER Result is NULL **/ RETURN_STATUS EFIAPI SafeInt64Mult ( IN INT64 Multiplicand, IN INT64 Multiplier, OUT INT64 *Result ) { RETURN_STATUS Status; UINT64 UnsignedMultiplicand; UINT64 UnsignedMultiplier; UINT64 UnsignedResult; if (Result == NULL) { return RETURN_INVALID_PARAMETER; } // // Split into sign and magnitude, do unsigned operation, apply sign. // if (Multiplicand < 0) { // // Avoid negating the most negative number. // UnsignedMultiplicand = ((UINT64)(- (Multiplicand + 1))) + 1; } else { UnsignedMultiplicand = (UINT64)Multiplicand; } if (Multiplier < 0) { // // Avoid negating the most negative number. // UnsignedMultiplier = ((UINT64)(- (Multiplier + 1))) + 1; } else { UnsignedMultiplier = (UINT64)Multiplier; } Status = SafeUint64Mult (UnsignedMultiplicand, UnsignedMultiplier, &UnsignedResult); if (!RETURN_ERROR (Status)) { if ((Multiplicand < 0) != (Multiplier < 0)) { if (UnsignedResult > MIN_INT64_MAGNITUDE) { *Result = INT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } else { *Result = - ((INT64)UnsignedResult); } } else { if (UnsignedResult > MAX_INT64) { *Result = INT64_ERROR; Status = RETURN_BUFFER_TOO_SMALL; } else { *Result = (INT64)UnsignedResult; } } } else { *Result = INT64_ERROR; } return Status; }