/**@file
Platform PEI driver
Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.
Copyright (c) 2011, Andrei Warkentin
Copyright (c) 2019, Citrix Systems, Inc.
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
//
// The package level header files this module uses
//
#include
//
// The Library classes this module consumes
//
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "Platform.h"
#include "Cmos.h"
EFI_MEMORY_TYPE_INFORMATION mDefaultMemoryTypeInformation[] = {
{ EfiACPIMemoryNVS, 0x004 },
{ EfiACPIReclaimMemory, 0x008 },
{ EfiReservedMemoryType, 0x004 },
{ EfiRuntimeServicesData, 0x024 },
{ EfiRuntimeServicesCode, 0x030 },
{ EfiBootServicesCode, 0x180 },
{ EfiBootServicesData, 0xF00 },
{ EfiMaxMemoryType, 0x000 }
};
EFI_PEI_PPI_DESCRIPTOR mPpiBootMode[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
&gEfiPeiMasterBootModePpiGuid,
NULL
}
};
UINT16 mHostBridgeDevId;
EFI_BOOT_MODE mBootMode = BOOT_WITH_FULL_CONFIGURATION;
VOID
AddIoMemoryBaseSizeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
UINT64 MemorySize
)
{
BuildResourceDescriptorHob (
EFI_RESOURCE_MEMORY_MAPPED_IO,
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
EFI_RESOURCE_ATTRIBUTE_TESTED,
MemoryBase,
MemorySize
);
}
VOID
AddReservedMemoryBaseSizeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
UINT64 MemorySize,
BOOLEAN Cacheable
)
{
BuildResourceDescriptorHob (
EFI_RESOURCE_MEMORY_RESERVED,
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
(Cacheable ?
EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE :
0
) |
EFI_RESOURCE_ATTRIBUTE_TESTED,
MemoryBase,
MemorySize
);
}
VOID
AddIoMemoryRangeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
EFI_PHYSICAL_ADDRESS MemoryLimit
)
{
AddIoMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
}
VOID
AddMemoryBaseSizeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
UINT64 MemorySize
)
{
BuildResourceDescriptorHob (
EFI_RESOURCE_SYSTEM_MEMORY,
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
EFI_RESOURCE_ATTRIBUTE_TESTED,
MemoryBase,
MemorySize
);
}
VOID
AddMemoryRangeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
EFI_PHYSICAL_ADDRESS MemoryLimit
)
{
AddMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
}
VOID
MemMapInitialization (
VOID
)
{
UINT64 PciIoBase;
UINT64 PciIoSize;
RETURN_STATUS PcdStatus;
PciIoBase = 0xC000;
PciIoSize = 0x4000;
//
// Create Memory Type Information HOB
//
BuildGuidDataHob (
&gEfiMemoryTypeInformationGuid,
mDefaultMemoryTypeInformation,
sizeof(mDefaultMemoryTypeInformation)
);
//
// Video memory + Legacy BIOS region
//
AddIoMemoryRangeHob (0x0A0000, BASE_1MB);
//
// Add PCI IO Port space available for PCI resource allocations.
//
BuildResourceDescriptorHob (
EFI_RESOURCE_IO,
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED,
PciIoBase,
PciIoSize
);
PcdStatus = PcdSet64S (PcdPciIoBase, PciIoBase);
ASSERT_RETURN_ERROR (PcdStatus);
PcdStatus = PcdSet64S (PcdPciIoSize, PciIoSize);
ASSERT_RETURN_ERROR (PcdStatus);
}
VOID
PciExBarInitialization (
VOID
)
{
union {
UINT64 Uint64;
UINT32 Uint32[2];
} PciExBarBase;
//
// We only support the 256MB size for the MMCONFIG area:
// 256 buses * 32 devices * 8 functions * 4096 bytes config space.
//
// The masks used below enforce the Q35 requirements that the MMCONFIG area
// be (a) correctly aligned -- here at 256 MB --, (b) located under 64 GB.
//
// Note that (b) also ensures that the minimum address width we have
// determined in AddressWidthInitialization(), i.e., 36 bits, will suffice
// for DXE's page tables to cover the MMCONFIG area.
//
PciExBarBase.Uint64 = FixedPcdGet64 (PcdPciExpressBaseAddress);
ASSERT ((PciExBarBase.Uint32[1] & MCH_PCIEXBAR_HIGHMASK) == 0);
ASSERT ((PciExBarBase.Uint32[0] & MCH_PCIEXBAR_LOWMASK) == 0);
//
// Clear the PCIEXBAREN bit first, before programming the high register.
//
PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW), 0);
//
// Program the high register. Then program the low register, setting the
// MMCONFIG area size and enabling decoding at once.
//
PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_HIGH), PciExBarBase.Uint32[1]);
PciWrite32 (
DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW),
PciExBarBase.Uint32[0] | MCH_PCIEXBAR_BUS_FF | MCH_PCIEXBAR_EN
);
}
VOID
MiscInitialization (
VOID
)
{
UINTN PmCmd;
UINTN Pmba;
UINT32 PmbaAndVal;
UINT32 PmbaOrVal;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
RETURN_STATUS PcdStatus;
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
// Build the CPU HOB with guest RAM size dependent address width and 16-bits
// of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
// S3 resume as well, so we build it unconditionally.)
//
BuildCpuHob (mPhysMemAddressWidth, 16);
//
// Determine platform type and save Host Bridge DID to PCD
//
switch (mHostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
PmbaOrVal = PIIX4_PMBA_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
PmbaOrVal = ICH9_PMBASE_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
default:
DEBUG ((DEBUG_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, mHostBridgeDevId));
ASSERT (FALSE);
return;
}
PcdStatus = PcdSet16S (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);
ASSERT_RETURN_ERROR (PcdStatus);
//
// If the appropriate IOspace enable bit is set, assume the ACPI PMBA
// has been configured (e.g., by Xen) and skip the setup here.
// This matches the logic in AcpiTimerLibConstructor ().
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// The PEI phase should be exited with fully accessibe ACPI PM IO space:
// 1. set PMBA
//
PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
//
// 2. set PCICMD/IOSE
//
PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
//
// 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
//
// Set Root Complex Register Block BAR
//
PciWrite32 (
POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
);
//
// Set PCI Express Register Range Base Address
//
PciExBarInitialization ();
}
}
VOID
BootModeInitialization (
VOID
)
{
EFI_STATUS Status;
if (CmosRead8 (0xF) == 0xFE) {
mBootMode = BOOT_ON_S3_RESUME;
}
CmosWrite8 (0xF, 0x00);
Status = PeiServicesSetBootMode (mBootMode);
ASSERT_EFI_ERROR (Status);
Status = PeiServicesInstallPpi (mPpiBootMode);
ASSERT_EFI_ERROR (Status);
}
VOID
ReserveEmuVariableNvStore (
)
{
EFI_PHYSICAL_ADDRESS VariableStore;
RETURN_STATUS PcdStatus;
//
// Allocate storage for NV variables early on so it will be
// at a consistent address. Since VM memory is preserved
// across reboots, this allows the NV variable storage to survive
// a VM reboot.
//
VariableStore =
(EFI_PHYSICAL_ADDRESS)(UINTN)
AllocateRuntimePages (
EFI_SIZE_TO_PAGES (2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize))
);
DEBUG ((DEBUG_INFO,
"Reserved variable store memory: 0x%lX; size: %dkb\n",
VariableStore,
(2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / 1024
));
PcdStatus = PcdSet64S (PcdEmuVariableNvStoreReserved, VariableStore);
ASSERT_RETURN_ERROR (PcdStatus);
}
VOID
DebugDumpCmos (
VOID
)
{
UINT32 Loop;
DEBUG ((DEBUG_INFO, "CMOS:\n"));
for (Loop = 0; Loop < 0x80; Loop++) {
if ((Loop % 0x10) == 0) {
DEBUG ((DEBUG_INFO, "%02x:", Loop));
}
DEBUG ((DEBUG_INFO, " %02x", CmosRead8 (Loop)));
if ((Loop % 0x10) == 0xf) {
DEBUG ((DEBUG_INFO, "\n"));
}
}
}
/**
Perform Platform PEI initialization.
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@return EFI_SUCCESS The PEIM initialized successfully.
**/
EFI_STATUS
EFIAPI
InitializeXenPlatform (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));
DebugDumpCmos ();
if (!XenDetect ()) {
DEBUG ((DEBUG_ERROR, "ERROR: Xen isn't detected\n"));
ASSERT (FALSE);
CpuDeadLoop ();
}
BootModeInitialization ();
AddressWidthInitialization ();
//
// Query Host Bridge DID
//
mHostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
PublishPeiMemory ();
InitializeRamRegions ();
InitializeXen ();
if (mBootMode != BOOT_ON_S3_RESUME) {
ReserveEmuVariableNvStore ();
PeiFvInitialization ();
MemMapInitialization ();
}
InstallClearCacheCallback ();
AmdSevInitialize ();
MiscInitialization ();
return EFI_SUCCESS;
}