/** @file
Lib function for Pei Quark South Cluster.

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/
#include "CommonHeader.h"

/**
  Program SVID/SID the same as VID/DID*
**/
EFI_STATUS
EFIAPI
InitializeIohSsvidSsid (
   IN UINT8   Bus,
   IN UINT8   Device,
   IN UINT8   Func
   )
{
  UINTN       Index;

  for (Index = 0; Index <= IOH_PCI_IOSF2AHB_0_MAX_FUNCS; Index++) {
    if (((Device == IOH_PCI_IOSF2AHB_1_DEV_NUM) && (Index >= IOH_PCI_IOSF2AHB_1_MAX_FUNCS))) {
      continue;
    }

    IohMmPci32(0, Bus, Device, Index, PCI_REG_SVID0) = IohMmPci32(0, Bus, Device, Index, PCI_REG_VID);
  }

  return EFI_SUCCESS;
}

/* Enable memory, io, and bus master for USB controller */
VOID
EFIAPI
EnableUsbMemIoBusMaster (
  IN UINT8   UsbBusNumber
  )
{
  UINT16 CmdReg;

  CmdReg = PciRead16 (PCI_LIB_ADDRESS (UsbBusNumber, IOH_USB_OHCI_DEVICE_NUMBER, IOH_OHCI_FUNCTION_NUMBER, PCI_REG_PCICMD));
  CmdReg = (UINT16) (CmdReg | EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_IO_SPACE | EFI_PCI_COMMAND_BUS_MASTER);
  PciWrite16 (PCI_LIB_ADDRESS (UsbBusNumber, IOH_USB_OHCI_DEVICE_NUMBER, IOH_OHCI_FUNCTION_NUMBER, PCI_REG_PCICMD), CmdReg);

  CmdReg = PciRead16 (PCI_LIB_ADDRESS (UsbBusNumber, IOH_USB_EHCI_DEVICE_NUMBER, IOH_EHCI_FUNCTION_NUMBER, PCI_REG_PCICMD));
  CmdReg = (UINT16) (CmdReg | EFI_PCI_COMMAND_MEMORY_SPACE | EFI_PCI_COMMAND_IO_SPACE | EFI_PCI_COMMAND_BUS_MASTER);
  PciWrite16 (PCI_LIB_ADDRESS (UsbBusNumber, IOH_USB_EHCI_DEVICE_NUMBER, IOH_EHCI_FUNCTION_NUMBER, PCI_REG_PCICMD), CmdReg);
}

/**
  Read south cluster GPIO input from Port A.

**/
UINT32
EFIAPI
ReadIohGpioValues (
  VOID
  )
{
  UINT32  GipData;
  UINT32  GipAddr;
  UINT32  TempBarAddr;
  UINT16  SaveCmdReg;
  UINT32  SaveBarReg;

  TempBarAddr = (UINT32) PcdGet64(PcdIohGpioMmioBase);

  GipAddr = PCI_LIB_ADDRESS(
      PcdGet8 (PcdIohGpioBusNumber),
      PcdGet8 (PcdIohGpioDevNumber),
      PcdGet8 (PcdIohGpioFunctionNumber), 0);

  //
  // Save current settings for PCI CMD/BAR registers.
  //
  SaveCmdReg = PciRead16 (GipAddr + PCI_COMMAND_OFFSET);
  SaveBarReg = PciRead32 (GipAddr + PcdGet8 (PcdIohGpioBarRegister));

  DEBUG ((EFI_D_INFO, "SC GPIO temporary enable  at %08X\n", TempBarAddr));

  // Use predefined tempory memory resource.
  PciWrite32 ( GipAddr + PcdGet8 (PcdIohGpioBarRegister), TempBarAddr);
  PciWrite8 ( GipAddr + PCI_COMMAND_OFFSET, EFI_PCI_COMMAND_MEMORY_SPACE);

  // Read GPIO configuration
  GipData = MmioRead32(TempBarAddr + GPIO_EXT_PORTA);

  //
  // Restore settings for PCI CMD/BAR registers.
  //
  PciWrite32 ((GipAddr + PcdGet8 (PcdIohGpioBarRegister)), SaveBarReg);
  PciWrite16 (GipAddr + PCI_COMMAND_OFFSET, SaveCmdReg);

  // Only 8 bits valid.
  return GipData & 0x000000FF;
}