diff options
author | Luc Verhaegen <libv@skynet.be> | 2009-11-28 18:07:51 +0000 |
---|---|---|
committer | Luc Verhaegen <libv@skynet.be> | 2009-11-28 18:07:51 +0000 |
commit | 60ea7dc95feb6a7262a1c94599038b576de75478 (patch) | |
tree | 6bf8431955536914f49a4e35dde0428f352923a6 | |
parent | 1c296ca8bc5985168e83edcf9502bab2421d44c1 (diff) | |
download | flashrom-60ea7dc95feb6a7262a1c94599038b576de75478.tar.gz flashrom-60ea7dc95feb6a7262a1c94599038b576de75478.tar.bz2 flashrom-60ea7dc95feb6a7262a1c94599038b576de75478.zip |
Boards: provide enormous intel_ich_gpio_set function
This code sets gpio lines on random intel ichs. Detects all currently
known intel ICHs, checks gpio lines, and then sets them accordingly.
Corresponding to flashrom svn r786.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Idwer Vollering <vidwer@gmail.com>
-rw-r--r-- | board_enable.c | 371 |
1 files changed, 225 insertions, 146 deletions
diff --git a/board_enable.c b/board_enable.c index 21b91f1f0..35f43ba4c 100644 --- a/board_enable.c +++ b/board_enable.c @@ -523,32 +523,6 @@ static int board_epox_ep_bx3(const char *name) } /** - * Suited for Acorp 6A815EPD. - */ -static int board_acorp_6a815epd(const char *name) -{ - struct pci_dev *dev; - uint16_t port; - uint8_t val; - - dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */ - if (!dev) { - fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n"); - return -1; - } - - /* Use GPIOBASE register to find where the GPIO is mapped. */ - port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE; - - val = INB(port); - val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */ - val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */ - OUTB(val, port); - - return 0; -} - -/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -590,105 +564,262 @@ static int board_artecgroup_dbe6x(const char *name) } /** - * Set the specified GPIO on the specified ICHx southbridge to high. - * - * @param name The name of this board. - * @param ich_vendor PCI vendor ID of the specified ICHx southbridge. - * @param ich_device PCI device ID of the specified ICHx southbridge. - * @param gpiobase_reg GPIOBASE register offset in the LPC bridge. - * @param gp_lvl Offset of GP_LVL register in I/O space, relative to GPIOBASE. - * @param gp_lvl_bitmask GP_LVL bitmask (set GPIO bits to 1, all others to 0). - * @param gpio_bit The bit (GPIO) which shall be set to high. - * @return If the write-enable was successful return 0, otherwise return -1. + * Set a GPIO line on a given intel ICH LPC controller. */ -static int ich_gpio_raise(const char *name, uint16_t ich_vendor, - uint16_t ich_device, uint8_t gpiobase_reg, - uint8_t gp_lvl, uint32_t gp_lvl_bitmask, - unsigned int gpio_bit) +static int intel_ich_gpio_set(int gpio, int raise) { + /* table mapping the different intel ICH LPC chipsets. */ + static struct { + uint16_t id; + uint8_t base_reg; + uint32_t bank0; + uint32_t bank1; + uint32_t bank2; + } intel_ich_gpio_table[] = { + {0x2410, 0x58, 0x0FE30000, 0, 0}, /* 82801AA (ICH) */ + {0x2420, 0x58, 0x0FE30000, 0, 0}, /* 82801AB (ICH0) */ + {0x2440, 0x58, 0x1BFF391B, 0, 0}, /* 82801BA (ICH2) */ + {0x244C, 0x58, 0x1A23399B, 0, 0}, /* 82801BAM (ICH2M) */ + {0x2450, 0x58, 0x1BFF0000, 0, 0}, /* 82801E (C-ICH) */ + {0x2480, 0x58, 0x1BFF0000, 0x00000FFF, 0}, /* 82801CA (ICH3-S) */ + {0x248C, 0x58, 0x1A230000, 0x00000FFF, 0}, /* 82801CAM (ICH3-M) */ + {0x24C0, 0x58, 0x1BFF0000, 0x00000FFF, 0}, /* 82801DB/DBL (ICH4/ICH4-L) */ + {0x24CC, 0x58, 0x1A030000, 0x00000FFF, 0}, /* 82801DBM (ICH4-M) */ + {0x24D0, 0x58, 0x1BFF0000, 0x00030305, 0}, /* 82801EB/ER (ICH5/ICH5R) */ + {0x2640, 0x48, 0x1BFF0000, 0x00030307, 0}, /* 82801FB/FR (ICH6/ICH6R) */ + {0x2641, 0x48, 0x1BFF0000, 0x00030307, 0}, /* 82801FBM (ICH6M) */ + {0x27B8, 0x48, 0xFFFFFFFF, 0x000300FF, 0}, /* 82801GB/GR (ICH7 Family) */ + {0x27B9, 0x48, 0xFFEBFFFE, 0x000300FE, 0}, /* 82801GBM (ICH7-M) */ + {0x27BD, 0x48, 0xFFEBFFFE, 0x000300FE, 0}, /* 82801GHM (ICH7-M DH) */ + {0x2810, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HB/HR (ICH8/R) */ + {0x2811, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HBM (ICH8M-E) */ + {0x2812, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HH (ICH8DH) */ + {0x2814, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HO (ICH8DO) */ + {0x2815, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HEM (ICH8M) */ + {0x2912, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IH (ICH9DH) */ + {0x2914, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IO (ICH9DO) */ + {0x2916, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IR (ICH9R) */ + {0x2917, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IEM (ICH9M-E) */ + {0x2918, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IB (ICH9) */ + {0x2919, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IBM (ICH9M) */ + {0x3A14, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JDO (ICH10DO) */ + {0x3A16, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JIR (ICH10R) */ + {0x3A18, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JIB (ICH10) */ + {0x3A1A, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JD (ICH10D) */ + {0, 0, 0, 0, 0} /* end marker */ + }; + struct pci_dev *dev; - uint16_t gpiobar; - uint32_t reg32; + uint16_t base; + uint32_t tmp; + int i, allowed; + + /* First, look for a known LPC bridge */ + for (dev = pacc->devices; dev; dev = dev->next) + if ((dev->vendor_id == 0x8086) && + (dev->device_class == 0x0601)) { /* ISA Bridge */ + /* Is this device in our list? */ + for (i = 0; intel_ich_gpio_table[i].id; i++) + if (dev->device_id == intel_ich_gpio_table[i].id) + break; + + if (intel_ich_gpio_table[i].id) + break; + } - dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */ if (!dev) { - fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n", - ich_vendor, ich_device); + fprintf(stderr, "\nERROR: No Known Intel LPC Bridge found.\n"); return -1; } - /* Use GPIOBASE register to find the I/O space for GPIO. */ - gpiobar = pci_read_word(dev, gpiobase_reg) & gp_lvl_bitmask; + /* According to the datasheets, all intel ICHs have the gpio bar 5:1 + strapped to zero. From some mobile ich9 version on, this becomes + 6:1. The mask below catches all. */ + base = pci_read_word(dev, intel_ich_gpio_table[i].base_reg) & 0xFFC0; - /* Set specified GPIO to high. */ - reg32 = INL(gpiobar + gp_lvl); - reg32 |= (1 << gpio_bit); - OUTL(reg32, gpiobar + gp_lvl); + /* check whether the line is allowed */ + if (gpio < 32) + allowed = (intel_ich_gpio_table[i].bank0 >> gpio) & 0x01; + else if (gpio < 64) + allowed = (intel_ich_gpio_table[i].bank1 >> (gpio - 32)) & 0x01; + else + allowed = (intel_ich_gpio_table[i].bank2 >> (gpio - 64)) & 0x01; + + if (!allowed) { + fprintf(stderr, "\nERROR: This Intel LPC Bridge does not allow" + " setting GPIO%02d\n", gpio); + return -1; + } + + printf("\nIntel ICH LPC Bridge: %sing GPIO%02d.\n", + raise ? "Rais" : "Dropp", gpio); + + if (gpio < 32) { + /* Set line to GPIO */ + tmp = INL(base); + /* ICH/ICH0 multiplexes 27/28 on the line set. */ + if ((gpio == 28) && + ((dev->device_id == 0x2410) || (dev->device_id == 0x2420))) + tmp |= 1 << 27; + else + tmp |= 1 << gpio; + OUTL(tmp, base); + + /* As soon as we are talking to ICH8 and above, this register + decides whether we can set the gpio or not. */ + if (dev->device_id > 0x2800) { + tmp = INL(base); + if (!(tmp & (1 << gpio))) { + fprintf(stderr, "\nERROR: This Intel LPC Bridge" + " does not allow setting GPIO%02d\n", + gpio); + return -1; + } + } + + /* Set GPIO to OUTPUT */ + tmp = INL(base + 0x04); + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x04); + + /* Raise GPIO line */ + tmp = INL(base + 0x0C); + if (raise) + tmp |= 1 << gpio; + else + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x0C); + } else if (gpio < 64) { + gpio -= 32; + + /* Set line to GPIO */ + tmp = INL(base + 0x30); + tmp |= 1 << gpio; + OUTL(tmp, base + 0x30); + + /* As soon as we are talking to ICH8 and above, this register + decides whether we can set the gpio or not. */ + if (dev->device_id > 0x2800) { + tmp = INL(base + 30); + if (!(tmp & (1 << gpio))) { + fprintf(stderr, "\nERROR: This Intel LPC Bridge" + " does not allow setting GPIO%02d\n", + gpio + 32); + return -1; + } + } + + /* Set GPIO to OUTPUT */ + tmp = INL(base + 0x34); + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x34); + + /* Raise GPIO line */ + tmp = INL(base + 0x38); + if (raise) + tmp |= 1 << gpio; + else + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x38); + } else { + gpio -= 64; + + /* Set line to GPIO */ + tmp = INL(base + 0x40); + tmp |= 1 << gpio; + OUTL(tmp, base + 0x40); + + tmp = INL(base + 40); + if (!(tmp & (1 << gpio))) { + fprintf(stderr, "\nERROR: This Intel LPC Bridge does " + "not allow setting GPIO%02d\n", gpio + 64); + return -1; + } + + /* Set GPIO to OUTPUT */ + tmp = INL(base + 0x44); + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x44); + + /* Raise GPIO line */ + tmp = INL(base + 0x48); + if (raise) + tmp |= 1 << gpio; + else + tmp &= ~(1 << gpio); + OUTL(tmp, base + 0x48); + } return 0; } /** - * Suited for ASUS P4B266. + * Suited for Abit IP35: Intel P35 + ICH9R. */ -static int ich2_gpio22_raise(const char *name) +static int intel_ich_gpio16_raise(const char *name) { - return ich_gpio_raise(name, 0x8086, 0x2440, 0x58, 0x0c, 0xffc0, 22); + return intel_ich_gpio_set(16, 1); } /** - * Suited for the Dell PowerEdge 1850. All parameters except the last one are - * documented in the public Intel 82801EB ICH5 / 82801ER ICH5R datasheet. The - * last parameter (GPIO number) has to be in the range [16,31] according to - * said Intel datasheet and was found by exhaustive search. + * Suited for MSI MS-7046: LGA775 + 915P + ICH6. */ -static int ich5_gpio23_raise(const char *name) +static int intel_ich_gpio19_raise(const char *name) { - return ich_gpio_raise(name, 0x8086, 0x24d0, 0x58, 0x0c, 0xffc0, 23); + return intel_ich_gpio_set(19, 1); } /** - * Suited for MSI MS-7046. + * Suited for Asus P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. */ -static int ich6_gpio19_raise(const char *name) +static int intel_ich_gpio21_raise(const char *name) { - return ich_gpio_raise(name, 0x8086, 0x2640, 0x48, 0x0c, 0xffc0, 19); + return intel_ich_gpio_set(21, 1); } -static int board_kontron_986lcd_m(const char *name) +/** + * Suited for ASUS P4B266: socket478 + intel 845D + ICH2. + */ +static int intel_ich_gpio22_raise(const char *name) { - struct pci_dev *dev; - uint16_t gpiobar; - uint32_t val; + return intel_ich_gpio_set(22, 1); +} -#define ICH7_GPIO_LVL2 0x38 +/** + * Suited for Dell Poweredge 1850: Intel PPGA604 + E7520 + ICH5R. + */ +static int intel_ich_gpio23_raise(const char *name) +{ + return intel_ich_gpio_set(23, 1); +} - dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */ - if (!dev) { - // This will never happen on this board - fprintf(stderr, "\nERROR: ICH7 LPC bridge not found.\n"); - return -1; - } +/** + * Suited for Acorp 6A815EPD: socket 370 + intel 815 + ICH2. + */ +static int board_acorp_6a815epd(const char *name) +{ + int ret; - /* Use GPIOBASE register to find where the GPIO is mapped. */ - gpiobar = pci_read_word(dev, 0x48) & 0xfffc; + /* Lower Blocks Lock -- pin 7 of PLCC32 */ + ret = intel_ich_gpio_set(22, 1); + if (!ret) /* Top Block Lock -- pin 8 of PLCC32 */ + ret = intel_ich_gpio_set(23, 1); - val = INL(gpiobar + ICH7_GPIO_LVL2); /* GP_LVL2 */ - printf_debug("\nGPIOBAR=0x%04x GP_LVL: 0x%08x\n", gpiobar, val); + return ret; +} - /* bit 2 (0x04) = 0 #TBL --> bootblock locking = 1 - * bit 2 (0x04) = 1 #TBL --> bootblock locking = 0 - * bit 3 (0x08) = 0 #WP --> block locking = 1 - * bit 3 (0x08) = 1 #WP --> block locking = 0 - * - * To enable full block locking, you would do: - * val &= ~ ((1 << 2) | (1 << 3)); - */ - val |= (1 << 2) | (1 << 3); +/** + * Suited for Kontron 986LCD-M: socket478 + 915GM + ICH7R. + */ +static int board_kontron_986lcd_m(const char *name) +{ + int ret; - OUTL(val, gpiobar + ICH7_GPIO_LVL2); + ret = intel_ich_gpio_set(34, 1); /* #TBL */ + if (!ret) + ret = intel_ich_gpio_set(35, 1); /* #WP */ - return 0; + return ret; } /** @@ -881,32 +1012,6 @@ static int board_mitac_6513wu(const char *name) } /** - * Suited for Abit IP35: Intel P35 + ICH9R. - */ -static int board_abit_ip35(const char *name) -{ - struct pci_dev *dev; - uint16_t base; - uint8_t tmp; - - dev = pci_dev_find(0x8086, 0x2916); /* Intel ICH9R LPC Interface */ - if (!dev) { - fprintf(stderr, "\nERROR: Intel ICH9R LPC not found.\n"); - return -1; - } - - /* get LPC GPIO base */ - base = pci_read_long(dev, 0x48) & 0x0000FFC0; - - /* Raise GPIO 16 */ - tmp = INB(base + 0x0E); - tmp |= 0x01; - OUTB(tmp, base + 0x0E); - - return 0; -} - -/** * Suited for Asus A7V8X: VIA KT400 + VT8235 + IT8703F-A */ static int board_asus_a7v8x(const char *name) @@ -1009,32 +1114,6 @@ static int board_asus_a7v600x(const char *name) } /** - * Suited for Asus P4P800-E Deluxe: Intel Intel 865PE + ICH5R. - */ -static int board_asus_p4p800(const char *name) -{ - struct pci_dev *dev; - uint16_t base; - uint8_t tmp; - - dev = pci_dev_find(0x8086, 0x24D0); /* Intel ICH5R ISA Bridge */ - if (!dev) { - fprintf(stderr, "\nERROR: Intel ICH5R ISA Bridge not found.\n"); - return -1; - } - - /* get PM IO base */ - base = pci_read_long(dev, 0x58) & 0x0000FFC0; - - /* Raise GPIO 21 */ - tmp = INB(base + 0x0E); - tmp |= 0x20; - OUTB(tmp, base + 0x0E); - - return 0; -} - -/** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. * @@ -1063,7 +1142,7 @@ static int board_asus_p4p800(const char *name) /* Please keep this list alphabetically ordered by vendor/board name. */ struct board_pciid_enable board_pciid_enables[] = { /* first pci-id set [4], second pci-id set [4], coreboot id [2], vendor name board name flash enable */ - {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, "Abit", "IP35", board_abit_ip35}, + {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, "Abit", "IP35", intel_ich_gpio16_raise}, {0x8086, 0x1130, 0, 0, 0x105a, 0x0d30, 0x105a, 0x4d33, "acorp", "6a815epd", "Acorp", "6A815EPD", board_acorp_6a815epd}, {0x1022, 0x746B, 0x1022, 0x36C0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A*", board_epox_ep_8k5a2}, @@ -1073,12 +1152,12 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, "ASUS", "A7V600-X", board_asus_a7v600x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, "ASUS", "A7V8X", board_asus_a7v8x}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8X-MX SE", board_asus_a7v8x_mx}, - {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", ich2_gpio22_raise}, - {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", board_asus_p4p800}, + {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", intel_ich_gpio22_raise}, + {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", intel_ich_gpio21_raise}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "asus", "p5a", "ASUS", "P5A", board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", board_asus_p5nd2_sli}, {0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, "Biostar", "P4M80-M4", it8705_rom_write_enable}, - {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, "Dell", "PowerEdge 1850", ich5_gpio23_raise}, + {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, "Dell", "PowerEdge 1850", intel_ich_gpio23_raise}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, "Elitegroup", "K7VTA3", it8705f_write_enable_2e}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, "EPoX", "EP-8K5A2", board_epox_ep_8k5a2}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, "EPoX", "EP-8RDA3+", board_epox_ep_8rda3plus}, @@ -1103,7 +1182,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0, 0, 0, 0, "msi", "kt4v", "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, - {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", ich6_gpio19_raise}, + {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, {0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", it8705f_write_enable_2e}, {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25}, |