Add a bunch of new/tested stuff and various small changes 23

Tested mainboards:
OK:
 - Elitegroup GF7050VT-M
   Reported by Alex
 - Fujitsu D2724-A1x (used in ESPRIMO E5625)
   Reported by Rainer Spillmann
 - Teclast X98 Air 3G
   Reported by Antonio Ospite

Flash chips:
 - Fix MX25L6405(D) definition by splitting it.
   Reported by Reggie McMurtrey
 - Add Macronix MX25L..08E family and rearrange MX25L6436E.
 - Pm49FL004 to PREW (+EW)
   Reported by Georg Sauthoff

Miscellaneous:
 - Add board enable for abit KN9 Ultra.
 - Mark ARM-USB-OCD as working OK.
 - Use "mobile devices" instead of "laptops" in output.
 - Tiny other stuff.

Corresponding to flashrom svn r1886.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

7 files changed, 81 insertions, 33 deletions

diff --git a/Makefile b/Makefile
index 5c5c02727..e74d051b0 100644
--- a/Makefile
+++ b/Makefile
@@ -1081,6 +1081,6 @@ djgpp-dos: clean
 libpayload: clean
 	make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib
 
-.PHONY: all install clean distclean compiler hwlibs features export tarball dos featuresavailable
+.PHONY: all install clean distclean compiler hwlibs features export tarball djgpp-dos featuresavailable libpayload
 
 -include $(OBJS:.o=.d)
diff --git a/board_enable.c b/board_enable.c
index 81dcfec88..31984e356 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1099,6 +1099,7 @@ static int nvidia_mcp_gpio0_raise(void)
 /*
  * Suited for:
  *  - abit KN8 Ultra: NVIDIA CK804
+ *  - abit KN9 Ultra: NVIDIA MCP55
  */
 static int nvidia_mcp_gpio2_lower(void)
 {
@@ -2314,6 +2315,7 @@ const struct board_match board_matches[] = {
 	{0x8086, 0x2930, 0x147b, 0x1084,  0x11ab, 0x4364, 0x147b, 0x1084, NULL,         NULL, NULL,           P3, "abit",        "IP35",                  0,   OK, intel_ich_gpio16_raise},
 	{0x8086, 0x2930, 0x147b, 0x1083,  0x10ec, 0x8167, 0x147b, 0x1083, NULL,         NULL, NULL,           P3, "abit",        "IP35 Pro",              0,   OK, intel_ich_gpio16_raise},
 	{0x10de, 0x0050, 0x147b, 0x1c1a,  0x10de, 0x0052, 0x147b, 0x1c1a, NULL,         NULL, NULL,           P3, "abit",        "KN8 Ultra",             0,   NT, nvidia_mcp_gpio2_lower},
+	{0x10de, 0x0369, 0x147b, 0x1c20,  0x10de, 0x0360, 0x147b, 0x1c20, "^KN9(NF-MCP55 series)$", NULL, NULL, P3, "abit",      "KN9 Ultra",             0,   OK, nvidia_mcp_gpio2_lower},
 	{0x10de, 0x01e0, 0x147b, 0x1c00,  0x10de, 0x0060, 0x147B, 0x1c00, NULL,         NULL, NULL,           P3, "abit",        "NF7-S",                 0,   OK, nvidia_mcp_gpio8_raise},
 	{0x10de, 0x02f0, 0x147b, 0x1c26,  0x10de, 0x0260, 0x147b, 0x1c26, NULL,         NULL, NULL,           P3, "abit",        "NF-M2 nView",           0,   OK, nvidia_mcp_gpio4_lower},
 	{0x1106, 0x0691,      0,      0,  0x1106, 0x3057,      0,      0, "(VA6)$",     NULL, NULL,           P3, "abit",        "VA6",                   0,   OK, via_apollo_gpo4_lower},
diff --git a/flashchips.c b/flashchips.c
index 4f36e95a6..8b5d1ecdc 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6803,12 +6803,14 @@ const struct flashchip flashchips[] = {
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L8005/MX25L8006E/MX25V8005",
+		.name		= "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L8005,
 		.total_size	= 1024,
 		.page_size	= 256,
+		/* MX25L8006E, MX25L8008E support SFDP */
+		/* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */
 		.feature_bits	= FEATURE_WRSR_WREN,
 		.tested		= TEST_OK_PREW,
 		.probe		= probe_spi_rdid,
@@ -6876,13 +6878,13 @@ const struct flashchip flashchips[] = {
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L1605A/MX25L1606E",
+		.name		= "MX25L1605A/MX25L1606E/MX25L1608E",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L1605,
 		.total_size	= 2048,
 		.page_size	= 256,
-		/* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */
+		/* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */
 		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
 		.tested		= TEST_OK_PREW,
 		.probe		= probe_spi_rdid,
@@ -6909,7 +6911,7 @@ const struct flashchip flashchips[] = {
 		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */
 		.unlock		= spi_disable_blockprotect_bp3_srwd,
 		.write		= spi_chip_write_256,
-		.read		= spi_chip_read, /* Fast read (0x0B) supported */
+		.read		= spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */
 		.voltage	= {2700, 3600},
 	},
 
@@ -6941,7 +6943,7 @@ const struct flashchip flashchips[] = {
 				.block_erase = spi_block_erase_c7,
 			},
 		},
-		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */
 		.unlock		= spi_disable_blockprotect_bp3_srwd,
 		.write		= spi_chip_write_256,
 		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O supported */
@@ -7084,7 +7086,7 @@ const struct flashchip flashchips[] = {
 				.block_erase = spi_block_erase_c7,
 			},
 		},
-		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
 		.unlock		= spi_disable_blockprotect_bp3_srwd,
 		.write		= spi_chip_write_256,
 		.read		= spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
@@ -7093,7 +7095,7 @@ const struct flashchip flashchips[] = {
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L3206E",
+		.name		= "MX25L3206E/MX25L3208E",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L3205,
@@ -7207,14 +7209,14 @@ const struct flashchip flashchips[] = {
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L6405(D)",
+		.name		= "MX25L6405",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L6405,
 		.total_size	= 8192,
 		.page_size	= 256,
-		/* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */
-		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		/* Has an additional 512B EEPROM sector */
+		.feature_bits	= FEATURE_WRSR_WREN,
 		.tested		= TEST_OK_PREW,
 		.probe		= probe_spi_rdid,
 		.probe_timing	= TIMING_ZERO,
@@ -7234,22 +7236,22 @@ const struct flashchip flashchips[] = {
 				.block_erase = spi_block_erase_c7,
 			}
 		},
-		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */
 		.unlock		= spi_disable_blockprotect_bp3_srwd,
 		.write		= spi_chip_write_256,
-		.read		= spi_chip_read,
+		.read		= spi_chip_read, /* Fast read (0x0B) supported */
 		.voltage	= {2700, 3600},
 	},
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L6406E/MX25L6436E",
+		.name		= "MX25L6405D",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L6405,
 		.total_size	= 8192,
 		.page_size	= 256,
-		/* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */
+		/* OTP: 64B total; enter 0xB1, exit 0xC1 */
 		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
 		.tested		= TEST_OK_PREW,
 		.probe		= probe_spi_rdid,
@@ -7270,16 +7272,56 @@ const struct flashchip flashchips[] = {
 				.block_erase = spi_block_erase_c7,
 			}
 		},
-		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
 		.unlock		= spi_disable_blockprotect_bp3_srwd,
 		.write		= spi_chip_write_256,
-		.read		= spi_chip_read,
+		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */
 		.voltage	= {2700, 3600},
 	},
 
 	{
 		.vendor		= "Macronix",
-		.name		= "MX25L6445E/MX25L6465E/MX25L6473E",
+		.name		= "MX25L6406E/MX25L6408E",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= MACRONIX_ID,
+		.model_id	= MACRONIX_MX25L6405,
+		.total_size	= 8192,
+		.page_size	= 256,
+		/* MX25L6406E supports SFDP */
+		/* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_OK_PREW,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 2048} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_52,
+			}, {
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd,
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B), dual I/O read supported */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Macronix",
+		.name		= "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E",
 		.bustype	= BUS_SPI,
 		.manufacture_id	= MACRONIX_ID,
 		.model_id	= MACRONIX_MX25L6405,
@@ -10126,9 +10168,9 @@ const struct flashchip flashchips[] = {
 		.total_size	= 512,
 		.page_size	= 64 * 1024,
 		.feature_bits	= FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
-		.tested		= TEST_OK_PR,
+		.tested		= TEST_OK_PREW,
 		.probe		= probe_jedec,
-		.probe_timing	= TIMING_ZERO,	/* routine is wrapper to probe_jedec (pm49fl00x.c) */
+		.probe_timing	= TIMING_ZERO,
 		.block_erasers	=
 		{
 			{
diff --git a/flashchips.h b/flashchips.h
index 1bf811a1c..07ae49d0a 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -470,10 +470,10 @@
 #define MACRONIX_MX25L1005	0x2011	/* Same as MX25L1005C, MX25L1006E */
 #define MACRONIX_MX25L2005	0x2012	/* Same as MX25L2005C, MX25L2006E */
 #define MACRONIX_MX25L4005	0x2013	/* Same as MX25L4005A, MX25L4005C, MX25L4006E */
-#define MACRONIX_MX25L8005	0x2014	/* Same as MX25V8005, MX25L8006E, FIXME: MX25L8073E (4k 0x20) */
-#define MACRONIX_MX25L1605	0x2015	/* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */
-#define MACRONIX_MX25L3205	0x2016	/* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52); MX25L3273E (4k 0x20, 32k 0x52) */
-#define MACRONIX_MX25L6405	0x2017	/* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k 0x52) */
+#define MACRONIX_MX25L8005	0x2014	/* Same as MX25V8005, MX25L8006E, MX25L8008E, FIXME: MX25L8073E (4k 0x20) */
+#define MACRONIX_MX25L1605	0x2015	/* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E/MX25L1608E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */
+#define MACRONIX_MX25L3205	0x2016	/* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E/MX25L3208E (4k 0x20, 64k 0x52); MX25L3273E (4k 0x20, 32k 0x52) */
+#define MACRONIX_MX25L6405	0x2017	/* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6408E (4k 0x20); MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k 0x52) */
 #define MACRONIX_MX25L12805D	0x2018	/* MX25L12805D (no 32k); MX25L12865E, MX25L12835F, MX25L12845E (32k 0x52) */
 #define MACRONIX_MX25L25635F	0x2019	/* Same as MX25L25639F, but the latter seems to not support REMS */
 #define MACRONIX_MX25L1635D	0x2415
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 4e23797bd..08742ecf4 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -67,7 +67,7 @@ const struct dev_entry devs_ft2232spi[] = {
 	{FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
 	{GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
 	{FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"},
-	{OLIMEX_VID, OLIMEX_ARM_OCD_PID, NT, "Olimex", "ARM-USB-OCD"},
+	{OLIMEX_VID, OLIMEX_ARM_OCD_PID, OK, "Olimex", "ARM-USB-OCD"},
 	{OLIMEX_VID, OLIMEX_ARM_TINY_PID, OK, "Olimex", "ARM-USB-TINY"},
 	{OLIMEX_VID, OLIMEX_ARM_OCD_H_PID, OK, "Olimex", "ARM-USB-OCD-H"},
 	{OLIMEX_VID, OLIMEX_ARM_TINY_H_PID, OK, "Olimex", "ARM-USB-TINY-H"},
diff --git a/print.c b/print.c
index 59bc455e1..a6bc26574 100644
--- a/print.c
+++ b/print.c
@@ -480,9 +480,9 @@ int print_supported(void)
 	       programmer_table[PROGRAMMER_INTERNAL].name);
 	print_supported_chipsets();
 	msg_ginfo("\n");
-	print_supported_boards_helper(boards_known, "boards");
+	print_supported_boards_helper(boards_known, "mainboards");
 	msg_ginfo("\n");
-	print_supported_boards_helper(laptops_known, "laptops");
+	print_supported_boards_helper(laptops_known, "mobile devices");
 #endif
 	for (i = 0; i < PROGRAMMER_INVALID; i++) {
 		const struct programmer_entry prog = programmer_table[i];
@@ -535,6 +535,7 @@ const struct board_info boards_known[] = {
 	B("abit",	"IP35 Pro",		OK, NULL, NULL),
 	B("abit",	"IS-10",		BAD, NULL, "Reported by deejkuba@aol.com to flashrom@coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
 	B("abit",	"KN8 Ultra",		OK, NULL, NULL),
+	B("abit",	"KN9 Ultra",		OK, NULL, NULL),
 	B("abit",	"NF-M2 nView",		OK, NULL, NULL),
 	B("abit",	"NF-M2S",		OK, NULL, NULL),
 	B("abit",	"NF7-S",		OK, NULL, NULL),
@@ -774,6 +775,7 @@ const struct board_info boards_known[] = {
 	B("Elitegroup",	"GeForce6100PM-M2 (V3.0)", OK, NULL, NULL),
 	B("Elitegroup",	"GeForce6100SM-M",	OK, NULL, NULL),
 	B("Elitegroup",	"GeForce7050M-M (V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=865&MenuID=20&LanID=0", NULL),
+	B("Elitegroup",	"GF7050VT-M",		OK, NULL, NULL),
 	B("Elitegroup", "GF7100PVT-M3 (V1.0)",	OK, NULL, NULL),
 	B("Elitegroup", "GF8200A",		OK, NULL, NULL),
 	B("Elitegroup",	"K7S5A",		OK, NULL, NULL),
@@ -803,7 +805,8 @@ const struct board_info boards_known[] = {
 	B("Foxconn",	"P55MX",		OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000474", "Needs the MFG jumper to be set correctly before flashing to enable the Flash Descriptor Override Strap."),
 	B("Foxconn",	"Q45M",			BAD, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000587", "Probing works (Hardware sequencing, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
 	B("Freetech",	"P6F91i",		OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F91i.html", NULL),
-	B("Fujitsu",	"D3041-A1",		OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."),
+	B("Fujitsu",	"D2724-A1x",		OK, NULL, "Used in ESPRIMO E5625."),
+	B("Fujitsu",	"D3041-A1x",		OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."),
 	B("Fujitsu-Siemens", "CELSIUS W410",	BAD, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Industrial&ExtendedLifetime/D3061&D3062/", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
 	B("Fujitsu-Siemens", "ESPRIMO P5915",	OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/P/EsprimoP5915-6.htm", "Mainboard model is D2312-A2."),
 	B("GIGABYTE",	"GA-2761GXDK",		OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/", NULL),
@@ -1144,6 +1147,7 @@ const struct board_info laptops_known[] = {
 	B("IBM/Lenovo",	"ThinkPad 240",		BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
 	B("IBM/Lenovo",	"3000 V100 TF05Cxx",	OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop", NULL),
 	//B("MSI",	"GT60-2OD",		OK, "http://www.msi.com/product/nb/GT60_2OD.html", NULL), requires layout patches
+	B("Teclast",	"X98 Air 3G",		OK, NULL, NULL),
 #endif
 
 	{0},
diff --git a/print_wiki.c b/print_wiki.c
index 2936dbf86..d2fb5e28d 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -133,15 +133,15 @@ static const char *test_state_to_template(enum test_state test_state)
 }
 
 #if CONFIG_INTERNAL == 1
-static const char laptop_intro[] = "\n== Supported laptops/notebooks ==\n\n\
-In general, flashing laptops is more difficult because laptops\n\n\
+static const char laptop_intro[] = "\n== Supported mobile devices (laptops, tablets etc.) ==\n\n\
+In general, flashing mobile devices is more difficult because they\n\n\
 * often use the flash chip for stuff besides the BIOS,\n\
 * often have special protection stuff which has to be handled by flashrom,\n\
 * often use flash translation circuits which need drivers in flashrom.\n\n\
 <div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
 background-color:#ff6666; align:right; border:1px solid #000000;\">\n\
 '''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
-untested laptops unless you have a means to recover from a flashing that goes \
+untested mobile devices unless you have a means to recover from a flashing that goes \
 wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
 
 static void print_supported_chipsets_wiki(int cols)
@@ -275,10 +275,10 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
 static void print_supported_boards_wiki(void)
 {
 	printf("%s", board_intro);
-	print_supported_boards_wiki_helper("boards", 2, boards_known);
+	print_supported_boards_wiki_helper("mainboards", 2, boards_known);
 
 	printf("%s", laptop_intro);
-	print_supported_boards_wiki_helper("laptops", 1, laptops_known);
+	print_supported_boards_wiki_helper("mobile devices", 1, laptops_known);
 }
 #endif