diff options
author | Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> | 2014-07-28 20:35:21 +0000 |
---|---|---|
committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2014-07-28 20:35:21 +0000 |
commit | 2a41f0a2c0daeb0ee2a38a252ab96135d70a6b81 (patch) | |
tree | 9d9c28c7560f4947c49e54e62c1f3a04f07aec45 /flashrom.8.tmpl | |
parent | a5bcbceb581f27cfc0055369d3dd9cfd1ae00bfa (diff) | |
download | flashrom-2a41f0a2c0daeb0ee2a38a252ab96135d70a6b81.tar.gz flashrom-2a41f0a2c0daeb0ee2a38a252ab96135d70a6b81.tar.bz2 flashrom-2a41f0a2c0daeb0ee2a38a252ab96135d70a6b81.zip |
Add new programmer for SPI EEPROMs attached to Intel 82580 NICs
This patch lets you read and write the EEPROM on 82580-based gigabit NIC
cards. So far it has been tested on copper NICs only, but other variants
employing this controller should work too.
It is a nice substitution for the official eeupdate tool.
Speed is quite decent: less than 4 seconds for erases or writes of 32 kB.
Corresponding to flashrom svn r1832.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'flashrom.8.tmpl')
-rw-r--r-- | flashrom.8.tmpl | 16 |
1 files changed, 13 insertions, 3 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 0b4867d32..153591abb 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -225,6 +225,8 @@ bitbanging adapter) .sp .BR "* usbblaster_spi" " (for SPI flash ROMs attached to an Altera USB-Blaster compatible cable)" .sp +.BR "* nicintel_eeprom" " (for SPI EEPROMs on Intel Gigabit network cards)" +.sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER SPECIFIC INFO @@ -591,7 +593,7 @@ syntax where .B content is an 8-bit hexadecimal value. .SS -.BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel"\ +.BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\ , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\ , " satamv" , " atahpt" ", " atavia " and " it8212 " programmers These programmers have an option to specify the PCI address of the card @@ -625,6 +627,14 @@ For more information please see .nh .B http://flashrom.org/VT6421A .SS +.BR "nicintel_eeprom " programmer +This is the first programmer module in flashrom that does not provide access to NOR flash chips but EEPROMs +mounted on gigabit Ethernet cards based on Intel's 82580 NIC. Because EEPROMs normally do not announce their +size nor allow to be identified, the controller relies on correct size values written to predefined addresses +within the chip. Flashrom follows this scheme but assumes the minimum size of 16 kB (128 kb) if an unprogrammed +EEPROM/card is detected. Intel specifies following EEPROMs to be compatible: Atmel AT25128, AT25256, Micron (ST) +M95128, M95256 and OnSemi (Catalyst) CAT25CS128. +.SS .BR "ft2232_spi " programmer An optional parameter specifies the controller type and channel/interface/port it should support. For that you have to use the @@ -922,8 +932,8 @@ need PCI configuration space access and raw memory access. .B rayer_spi needs raw I/O port access. .sp -.B satasii -needs PCI configuration space read access and raw memory access. +.BR satasii ", " nicintel ", " nicintel_eeprom " and " nicintel_spi +need PCI configuration space read access and raw memory access. .sp .B satamv needs PCI configuration space read access, raw I/O port access and raw memory |