diff options
| -rw-r--r-- | flashrom.8.tmpl | 3 | ||||
| -rw-r--r-- | ft2232_spi.c | 6 |
2 files changed, 8 insertions, 1 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 27f38465a..8ef2cbf01 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -758,7 +758,8 @@ Atmel AT25128, AT25256, Micron (ST) M95128, M95256 and OnSemi (Catalyst) CAT25CS This module supports various programmers based on FTDI FT2232/FT4232H/FT232H chips including the DLP Design DLP-USB1232H, openbiosprog-spi, Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, OpenMoko Neo1973 Debug board (V2+), TIAO/DIYGADGET USB -Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP and Google Servo v1/v2. +Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2 and Tin Can Tools +Flyswatter/Flyswatter 2. .sp An optional parameter specifies the controller type, channel/interface/port and GPIO-based chip select it should support. For that you have to use the diff --git a/ft2232_spi.c b/ft2232_spi.c index 34b43ddee..5bdc2a7b2 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -269,6 +269,12 @@ int ft2232_spi_init(void) } else if (!strcasecmp(arg, "google-servo-v2-legacy")) { ft2232_vid = GOOGLE_VID; ft2232_type = GOOGLE_SERVO_V2_PID0; + } else if (!strcasecmp(arg, "flyswatter")) { + ft2232_type = FTDI_FT2232H_PID; + channel_count = 2; + /* Flyswatter and Flyswatter-2 require GPIO bits 0x80 + * and 0x40 to be driven low to enable output buffers */ + pindir = 0xcb; } else { msg_perr("Error: Invalid device type specified.\n"); free(arg); |