diff options
| -rw-r--r-- | flashchips.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/flashchips.c b/flashchips.c index ad7ecd753..eaf04a87e 100644 --- a/flashchips.c +++ b/flashchips.c @@ -2519,8 +2519,8 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT26F004, .total_size = 512, .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, .feature_bits = FEATURE_WRSR_WREN, + .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2670,10 +2670,10 @@ const struct flashchip flashchips[] = { } }, .printlock = spi_prettyprint_status_register_plain, - .gran = write_gran_1056bytes, .write = spi_write_at45db, .read = spi_read_at45db, .voltage = {2700, 3600}, + .gran = write_gran_1056bytes, }, { @@ -2710,8 +2710,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -2752,8 +2752,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -2794,8 +2794,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -2836,8 +2836,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -2878,8 +2878,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -2923,10 +2923,10 @@ const struct flashchip flashchips[] = { } }, .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ - .gran = write_gran_528bytes, .write = spi_write_at45db, .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ .voltage = {2700, 3600}, + .gran = write_gran_528bytes, }, { @@ -2963,8 +2963,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -3005,8 +3005,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -3047,8 +3047,8 @@ const struct flashchip flashchips[] = { .block_erase = spi_erase_at45db_chip, } }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ .printlock = spi_prettyprint_status_register_at45db, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ @@ -3456,11 +3456,11 @@ const struct flashchip flashchips[] = { .vendor = "ENE", .name = "KB9012 (EDI)", .bustype = BUS_SPI, - .spi_cmd_set = SPI_EDI, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_ERASED_ZERO, .tested = TEST_OK_PREW, + .spi_cmd_set = SPI_EDI, .probe = edi_probe_kb9012, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3470,10 +3470,10 @@ const struct flashchip flashchips[] = { .block_erase = edi_chip_block_erase, }, }, - .gran = write_gran_128bytes, .write = edi_chip_write, .read = edi_chip_read, .voltage = {2700, 3600}, + .gran = write_gran_128bytes, }, { @@ -14959,8 +14959,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .write = write_82802ab, .unlock = unlock_regspace2_uniform_64k, + .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -14992,8 +14992,8 @@ const struct flashchip flashchips[] = { .block_erase = erase_block_82802ab, } }, - .write = write_82802ab, .unlock = unlock_regspace2_uniform_64k, + .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, |