diff options
Diffstat (limited to 'Documentation/serprog-protocol.txt')
| -rw-r--r-- | Documentation/serprog-protocol.txt | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/Documentation/serprog-protocol.txt b/Documentation/serprog-protocol.txt index 3d4aa1a9c..d001cebb1 100644 --- a/Documentation/serprog-protocol.txt +++ b/Documentation/serprog-protocol.txt @@ -36,6 +36,8 @@ COMMAND Description Parameters Return Value 0x14 Set SPI clock frequency in Hz 32-bit requested frequency ACK + 32-bit set frequency / NAK 0x15 Toggle flash chip pin drivers 8-bit (0 disable, else enable) ACK / NAK 0x16 Set SPI Chip Select 8-bit ACK / NAK +0x17 Set SPI Mode 8-bit ACK / NAK +0x18 Set CS Mode 8-bit ACK / NAK 0x?? unimplemented command - invalid. @@ -93,6 +95,21 @@ Additional information of the above commands: 0x16 (S_SPI_CS): Set which SPI Chip Select pin to use. This operation is immediate, meaning it doesn't use the operation buffer. + 0x17 (S_SPI_MODE): + Set which SPI Mode to use for 0x13 O_SPIOP commands. + This operation is immediate, meaning it doesn't use the operation buffer. + The current defined modes are: + 0x00: SPI Half Duplex (default) + 0x01: SPI Full Duplex + 0x18 (S_CS_MODE): + Set which CS Mode to use. The CS Mode determines the CS behaviour. + This allows manual control over the CS. + This operation is immediate, meaning it doesn't use the operation buffer. + The current defined modes are: + 0x00: CS Auto Mode. The CS gets selected before 0x13 O_SPIOP commands and + deselected afterwards. (default) + 0x01: CS Selected. The CS will be selected until another mode is set. + 0x02: CS Deselected. The CS will be deselected until another mode is set. About mandatory commands: The only truly mandatory commands for any device are 0x00, 0x01, 0x02 and 0x10, but one can't really do anything with these commands. |