| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These support an additional bit which we did not turn on yet.
Without this patch they decode up to 512 kB, with this up to 1 MB.
Disentangle the enables of unrelated but mostly compatible chipsets
too, add some more debug output and set the max_rom_decode limits.
Also, make warnings really only warnings.
Corresponding to flashrom svn r1739.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
Affected chips: M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B.
Corresponding to flashrom svn r1738.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1737.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two locking strategies used by this umbrella family, one uniform
and one that matches the sector layout of the chip. Refactor the functions
involved and rename the overly complicated file to just stm50.c and the
functions accordingly.
This fixes unlocking of some of the non-uniform chips and gets rid of the
abuse of page_size.
Corresponding to flashrom svn r1736.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously we had to rely on dmidecode to decode the DMI/SMBIOS table.
This patch integrates a DMI decoder into flashrom. The old behavior of calling
dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no.
Significant portions of this patch were taken from dmidecode, hence add its
authors to the copyright notice (dmidecode is also GPL2+). We do a few things
differently though. First of all we do more bounds checking to prevent accessing
unmapped memory. We do not support disovery via EFI (yet), but memory
scanning only. We handle the chassis-type lock bit correctly which dmidecode
did not for a long while.
The API to the rest of flashrom remains stable, but the output changes slightly.
To share as much code as possible (which actually is not much), i have added
dmi_fill methods that get called in dmi_init. They are reponsible to fill the
dmi_strings array and setting the is_laptop variable. After it is called, dmi_init
prints all dmi_strings. Previously the strings were printed in the order they were
discovered, followed by the chassis-type, which is now output earlier (in dmi_fill).
Because DJGPP does not support strnlen a simple implementation was added
for it.
This is still only available on x86; actually it is not even compiled in for other
architectures at all anymore.
Corresponding to flashrom svn r1735.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows to use the DOS library trees stored in a user-specified directory.
I have mirrored the needed patches, sources and binaries (the latter
are properly licensed to allow that) in the flashrom wiki, so use those
URLs instead of the original sources.
Corresponding to flashrom svn r1734.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch replaces Alex Mauer's previous patch for this board (from 2008).
Tested to read, erase, and write on 2 different boards, both with AMIC
A29040BL flash chips, using both stock BIOS and coreboot images.
This patch marks the AMIC chip as tested at the same time.
Corresponding to flashrom svn r1733.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The type describes one entry of the whole layout actually.
Using layout_entry_t or something similar would be more correct,
but due to it length we will use "rom" instead of "layout" here and
in upcoming code.
Corresponding to flashrom svn r1732.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we are planning to support image files for rom entries, rename the
variable used to count the number of known rom entries to avoid confusion.
There is already num_include_args with similar semantics, hence we use
num_rom_entries.
Corresponding to flashrom svn r1731.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
Read_buf_from_file() and write_buf_to_file() use file streams which are
not supported in libpayload.
Corresponding to flashrom svn r1730.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
I had to touch svn directly, where is my reimbursement?
Corresponding to flashrom svn r1729.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
To avoid funny effects of ever changing files tracked by the VCS this patch
moves the manpage data to flashrom.8.tmpl and generates the actual
manpage with a new makefile target if needed.
Corresponding to flashrom svn r1728.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- remove bashism.
- simplify some git-related code.
- improved parameter and error handling.
- additional -d/--date action which is similar to the timestamp action.
- support for an optional path parameter.
- there is only one sane time format.
- and only one sane date format too.
- use UTC dates and times only.
- vastly improve git_url() to print the correct remote url and
"nearest" branch.
- remove username from repository URLs.
- add "-dirty" to local revisions if there are uncommitted changes.
- indicate in local revisions how many git-only commits were done
since branching from upstream svn.
- fix svn_revision() fallback to svn info and remove git-svn.
- print leading r in script instead of hardcode it in the makefile;
no more "0.9.7-runknown".
- make retrieving the upstream revision work even in cloned git-svn
repositories.
- more abstractions and helper functions.
- less fragmentation of actual functionality.
Corresponding to flashrom svn r1727.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom won't build nor run as native payload very soon (or ever).
This patch changes a special GNU make variable that allows to select
the default goal which is taken if no goal is given explicitly on
the command line. Normally this would be the first rule in Makefile,
i.e. all. This won't compile if the target OS is libpayload, hence
change it to "libflashrom.a" in that case.
This requires two not completely ancient GNU make features:
- MAKECMDGOALS
- .DEFAULT_GOAL
Checking for these with ancient-only GNU make features is non-trivial
and hereby postponed.
Corresponding to flashrom svn r1726.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
This one is even more strange than the AT45DB chips. Like the AT45DB321C
it does not support any power-of-2 page sizes. There is only one asymmetrical
eraser and that uses two opcodes.
Corresponding to flashrom svn r1725.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
It seems like this model is one-of-a-kind... it shares some properties
with the older versions of the AT45DB series as well as with new ones.
Corresponding to flashrom svn r1724.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1723.
Signed-off-by: Aidan Thornton <makosoft@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1722.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1721.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks to Vadim Girlin for finding out how to do that.
This is known to work on GA-MA770-UD3, GA-B75M-D3V, GA-B75N and
GA-H61M-S1 (only M_BIOS is populated).
Corresponding to flashrom svn r1720.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Add return values to sp_flush_stream(), sp_pass_writen(),
sp_execute_opbuf(), sp_execute_opbuf_noflush(),
sp_check_opbuf_usage(), sp_do_read_n().
- Use those return values to propagate errors instead of exiting.
In some places this has to wait for core API changes (error handling for
chip_readb, chip_readn, chip_write) hence comments are added instead.
Corresponding to flashrom svn r1719.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
This is mostly a leftover of Niklas' "remove exit call from pcidev_init" patch.
While not explicitly necessary detecting errors early is usually a good idea.
Corresponding to flashrom svn r1718.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
This allows to easily reconfigure a serial port as needed in
the Bus Pirate speedup patch.
Corresponding to flashrom svn r1717.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
(And explicitly require bash.)
Corresponding to flashrom svn r1716.
Signed-off-by: Joerg Mayer <jmayer@loplof.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Automatically round address ranges requested from rphysmap() to page
boundaries. Other physmap() variants were not changed so this is
safe regarding unmapping.
I had also to shorten the readbility defines for the physmap_common
parameters to make the calls fit a single line.
Corresponding to flashrom svn r1715.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to the previous PCI self-clean up patch this one allows to get rid
of a huge number of programmer shutdown functions and makes introducing
bugs harder. It adds a new function rphysmap() that takes care of unmapping
at shutdown. Callers are changed where it makes sense.
Corresponding to flashrom svn r1714.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows to retrieve various data from SCM systems (git and svn) and
use them in the build process to better indicate which source was used.
For now only use it for the upstream (i.e. svn) revision number, which
was previously implemented by an awful line in the Makefile.
Corresponding to flashrom svn r1713.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1710.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASUS P8H77-V LE
http://www.flashrom.org/pipermail/flashrom/2013-June/011127.html
- HP Pegatron IPMEL-AE (Evans-GL6)
Reported by Idwer on IRC
- MSI MS-7379 (G31M)
http://paste.flashrom.org/view.php?id=1726
- MSI MS-7816 (H87-G43)
http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html
- MSI MS-9830 (IM-945GSE-A, A9830IMS)
http://paste.flashrom.org/view.php?id=1730
- Supermicro X8SAX
http://paste.flashrom.org/view.php?id=1717
NOT OK:
- Intel D2700MUD
http://paste.flashrom.org/view.php?id=1723
- Intel DQ45CB
http://www.flashrom.org/pipermail/flashrom/2013-August/011369.html
Chipsets:
- Add PCI ID for Intel's Coleto Creek.
- Mark Intel H87 (0x8c4a) as OK.
http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html
Miscellaneous:
- ichspi: Fix printing address ranges if space is divided by FPB.
- Tiny other stuff.
Corresponding to flashrom svn r1709.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An unused programmer parameter is a sign that the user wanted to either
do something not supported by the programmer or misspelled a parameter
which may be essential for the given programmer.
Aborting is the only safe choice. If the programmer parameter is unused
because of an error during programmer init, aborting would have happened
anyway due to that error.
Corresponding to flashrom svn r1708.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I broke this in r1702 where I enabled avoidance of the verification step if
we did not modify anything in the erase/write step. The problem is that
all_skipped is initialized to true and hence it would only ever verify if
there have been changes noted in the erase/write step. This obviously
breaks the verification operation (-v/--verify) because there we never
enter the erase/write loop.
The better alternative would be to enable (the implicit) verification
in the write loop and not in cli_classic.c. This would require a bigger
change due to the existance of dont_verify_it. Eventually this is the
right thing to do but not so shortly before a release.
Corresponding to flashrom svn r1707.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PCI ID of the LPC bridge doesn't change between Hudson-2/3/4 and
Yangtze (Kabini/Temash) but the SPI interface does. Bail out in case we
detect Yangtze and add infrastructure to distinguish other families too for
further refactorings.
Also, add ASRock IMB-A180 to the laptop whitelist and refine the IMC
warning a bit.
Tested on ASRock IMB-A180 with and w/o USE_YANGTZE_HEURISTICS, and
by Chris Goodrich from Sage on
- SB600
- SB700
- SB800
- Hudson 3 (A70M)
- Kabini
Corresponding to flashrom svn r1706.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1705.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Detect and temporarily disable the IMC while accessing the flash.
Disable writes on default, but allow the user to enforce it.
Corresponding to flashrom svn r1704.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Micron acquired Numonyx and asked us to change the vendor names to
"Micron". For the chips clearly emerging from the former
manufacturers we (will) use "Micron/Numonyx/ST" and the original
name for the rest. Resorting the chip entries makes the diff
unreadable, hence the stand-alone commit.
Corresponding to flashrom svn r1703.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASUS C60M1-I
http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html
- ASUS P8H77-I
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- ASUS P8H77-M
http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html
- ASUS P8P67 LE (B2)
http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html
- Elitegroup GeForce6100PM-M2 (V3.0)
http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html
- GIGABYTE GA-P55A-UD7
http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html
- MSI B75MA-E33 (MS-7808)
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- MSI H77MA-G43 (MS-7756)
http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html
- MSI KA780G (MS-7551)
http://paste.flashrom.org/view.php?id=1617
- SAPPHIRE IPC-E350M1
Reported by xvilka on IRC
- Supermicro X8DTG-D
http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html
NOT OK:
- ASRock Fatal1ty Z77 Performance
http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html
- ASRock Z68 Extreme4
http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html
- ASUS P8B75-M LE
http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html
- ASUS P8P67-M PRO
http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html
- ASUS P8Z68-V LE
http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html
- Intel DQ77MK
http://paste.flashrom.org/view.php?id=1603
- Supermicro X9DRD-7LN4F
http://paste.flashrom.org/view.php?id=1582
- Supermicro X9SCE-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html
- Supermicro X9SCM-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html
- Tyan S7066
http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html
Chipsets:
- Marked Intel B75 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- Marked Intel H77 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- Removed 10de:03e2 because it is apparently the MCP61 host bridge.
It was reclassified to Host Bridge in the PCI device ID database and there
is at least one report suggesting this configuration too:
http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html
- Added MCP89 which hopefully works with the code for previous versions.
Thanks to James Laird for submitting this change.
Tested flash chips:
- Atmel AT25DF641(A) to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html
- Atmel AT25F512 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html
Also, change its ID according to Modification of PCN SC040401A:
"There has been a change in the returned value of the Product Identification
(RDID) command, the AT25F512A RDID code is 65h compared to 60h from
the AT25F512 product."
It seems to be quite likely that all AT25F512 are fully functional relabeled
AT25F1024 chips. There are even some hints in the datasheet:
in table 6 they stress that address pin 16 needs to be low under all circum-
stances; while continuous reads can wrap around on the AT25F1024 the DS
notes "For the AT25F512, the read command must be terminated when the
highest address (00FFFF) is reached." OTOH the lock bit semantics are
different, but this has not been tested thoroughly
- Atmel AT25F512A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1569
- Eon EN25F05 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1571
- Macronix MX25L12805(D) to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html
- Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P)
Tested by Stefan Tauner
- Micron/Numonyx/ST M25PX80 to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P)
Tested by Stefan Tauner
- SST SST25VF040B to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1574
- SST SST25VF040B.REMS to PREW (+EW)
http://paste.flashrom.org/view.php?id=1575
- ST M25P05-A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1576
- ST M29W512B to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html
- Winbond W25Q64.W to PREW (+PREW)
Tested by the chromiumos guys.
- Winbond W25Q128.V to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html
- Winbond W25X20 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html
Miscellaneous:
- Add Lenovo X201 to the laptop whitelist.
- Add chip IDs for the ESMT F25L..QA family.
- Add chip IDs for a few Macronix MX25 models.
- The list of flashchips is not sorted strictly alphabetically and should not be
either. Refine the comment explaining the scheme on top of the list.
- Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb).
- Use z length modifier in (more) prints for size_t types.
- Remove chips >16MB again because our current implementation of memory mapping
the flash chip violates common rules by mapping a window as large as the chip.
This leads to failing mmaps as can be seen here:
http://paste.flashrom.org/view.php?id=1695
- Document spispeed parameter of linux_spi (and fix some leaks).
- Rephrase the "multiple chips detected" message because it was confusing.
- Skip verification step if the image is equal to the flash contents.
- Tiny other stuff.
Corresponding to flashrom svn r1702.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unsigned long is not the right type for manipulating pointer values.
Since C99 there are suitable unsigned and signed types available, namely
uintptr_t and intptr_t respectively.
Use them in functions assigned to programmers' map_flash_region fields and
their callers where applicable.
This patch also changes the display width of all associated address values in
physmap.c to 16/8 hex characters depending on the actual size by
introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width
specifier.
Corresponding to flashrom svn r1701.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Use the reentrant tokenizer version strtok_r to break up vendor and model
names in print.c.
- Add implementation of strtok_r for mingw (strtok_r is POSIX only).
- Free allocated temporary memory again.
Corresponding to flashrom svn r1700.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With every newly supported programmer the information regarding reboots
on failures becomes more ridiculous. With this patch it is only shown when
the internal programmer module was selected.
Example outputs for external programmers:
1) non-fatal:
[…]
Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: 0x1fde7
ERASE FAILED!
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Good. It seems nothing was changed.
Writing to the flash chip apparently didn't do anything.
Please check the connections (especially those to write protection pins) between
the programmer and the flash chip. If you think the error is caused by flashrom
please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!
2) fatal:
[…]
Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed byte count from 0x00000000-0x0001ffff: 0x1fde6
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!
Corresponding to flashrom svn r1699.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1698.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Improve compilation with libpayload (compiling flashrom.c and
linking is still broken):
- disable Ponyprog (which enforced serial.c compilation)
- make errno available where it is needed
Fix internal.c for non-x86 and enable cb parsing on ARM.
Fix mingw builds by using its __USE_MINGW_ANSI_STDIO macro
and gnu_printf definition for printf format style checking.
See http://sourceforge.net/apps/trac/mingw-w64/wiki/gnu%20printf
This requires inclusion of stdio.h in flash.h.
Fix order of libraries in the Makefile:
FEATURE_LIBS needs to come *after* PCILIBS in case ZLIB is needed by it.
Corresponding to flashrom svn r1697.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the default implementation was used, which always failed.
On other systems than the Geode the code is not equal to that anymore,
but should not explode because setup_cpu_msr() returns an error and
therefore no other MSR functions should be called.
Corresponding to flashrom svn r1696.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by Leonardo Guardati <leonardo@guardati.it>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
I completely forgot about NetBSD in r1638 which was broken since then.
Also, on OpenBSD use iopl again and refine the warning in case we have
insufficient privileges.
Thanks to Jonathan A. Kollasch for his help in getting the details right.
Corresponding to flashrom svn r1695.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flash chips, links to footnotes.
- Escape mainboard notes in the wiki output with <nowiki> (this became
necessary because MediaWiki started to convert <mark@zl2tod.net> to
<mark>). - Add explanations at the top of the flash chip table in the
wiki. - Add links to the footnotes of mainboards and laptops similarly
to what MediaWiki does: link from the reference to the footnote and
vice versa too. Also, check for truncations of the footnotes due to the
limited buffer. - Fix a typo introduced in r1555.
Corresponding to flashrom svn r1694.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add...
- N25Q128..3E
- N25Q128..1E
- N25Q256..1E (defunct due to addressing)
- N25Q256..3E (defunct due to addressing)
- N25Q512..1E (defunct due to addressing)
- N25Q512..3E (defunct due to addressing)
- N25Q00A..3G (defunct due to addressing)
Also, refine existing family members.
Corresponding to flashrom svn r1693.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add...
- S25FL128S
- S25FL256S uniform version (defunct due to addressing)
- S25FL512S uniform version (defunct due to addressing)
Merge Intel S33 status register functions with this one's.
Corresponding to flashrom svn r1692.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add...
- S25FL204K
- S25FL208K
- S25FL216K (same ID as S25FL116K)
Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also, refine status register prettyprinting and unlocking of all family
members and add OTP details.
Corresponding to flashrom svn r1690.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
Also, refine unlocking of A25L032, A25LQ32A and A25LQ032.
Corresponding to flashrom svn r1689.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add...
- EN25QH64
- EN25QH128
- EN25QH256 (defunct due to addressing)
Corresponding to flashrom svn r1688.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|