summaryrefslogtreecommitdiffstats
path: root/board_enable.c
Commit message (Collapse)AuthorAgeFilesLines
* Add board enable for Asus P4P800SEMiklós Márton2019-10-041-0/+2
| | | | | | | | | | | See github issue #32: https://github.com/flashrom/flashrom/issues/32 Change-Id: I12b25ca3f85e5f2302681bddbe1adafa49c5fcb9 Signed-off-by: Miklós Márton <martonmiklosqdev@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/34764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* internal: Fix board vendor and model memory leaksJacob Garber2019-09-241-1/+1
| | | | | | | | | | | | | The board vendor and model are sometimes specified as arguments during an internal flash, so make sure they are freed at the end of initialization. Change-Id: I9f43708f3b075896be67acec114bc6f390f8c6ca Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1230664, 1230665 Reviewed-on: https://review.coreboot.org/c/flashrom/+/34846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* Fix -Wsign-compare troubleNico Huber2019-07-311-1/+2
| | | | | | | | | | | Mostly by changing to `unsigned` types where applicable, sometimes `signed` types, and casting as a last resort. Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
* tree: Make internal functions staticJacob Garber2019-06-231-2/+2
| | | | | | | | | | | | None of these functions are used outside of the files they are defined in, so make them all static. Change-Id: Ie9cbe12d289bcedacf2f1bf483ae64ef8039ccc1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Rework internal bus handling and laptop bail-outNico Huber2019-06-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | We used to bail out on any unknown laptop. However, modern systems with SPI flashes don't suffer from the original problem. Even if a flash chip is shared with the EC, the latter has to expect the host to send regular JEDEC SPI commands any time. So instead of bailing out, we limit the set of buses to probe. If we suspect to be running on a laptop, we only allow probing of SPI and opaque programmers. The user can still use the existing force options to probe all buses. This will obsolete some board-enables that could be moved to `print.c` in follow-up commits. Change-Id: I1dbda8cf0c10d7786106f14f0d18c3dcce35f0a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/28716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Thomas Heijligen <src@posteo.de>
* Fix several -Wold-style-declaration warningsRichard Hughes2019-02-031-1/+1
| | | | | | | | Change-Id: Iffe5e652779a13ee7f64696fb5df4a781fe9a632 Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/30404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* board_enable.c: Fix dmi_match string for ThinkPad X201Arthur Heymans2018-07-311-1/+1
| | | | | | | | | | | | TESTED, flashrom now properly works on Thinkpad X201 running vendor firmware and coreboot. Change-Id: I40dc7204499323148707b392d94ecd4b212f9ace Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Remove unneeded white spacesElyes HAOUAS2018-06-241-3/+3
| | | | | | | | | Change-Id: I90f171924790ced74a62ca344fee8607607aa480 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix whitespace errorsElyes HAOUAS2018-04-241-4/+4
| | | | | | | | Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* board_enable: add AOpen i965GMt-LALuc Verhaegen2018-03-291-0/+2
| | | | | | | | Change-Id: I8899bbe06707fe76256539f90f5b670301228d52 Signed-off-by: Luc Verhaegen <libv@skynet.be> Reviewed-on: https://review.coreboot.org/25396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Whitelist Lenovo Thinkpad X220Arthur Heymans2018-03-071-0/+1
| | | | | | | | | | | | | | Coreboot uses the subvendor VID/DID of the Thinkpad X220-Tablet for all X220 variants. Don't specify a dmidecode string so that it can be used with coreboot on all X220 variants and on X220-Tablet with vendor firmare. Change-Id: Idd667da8209a664469c1a909a549d2b625714a78 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* board_enable: Whitelist several ThinkPad laptopsLeah Rowe2018-02-201-0/+4
| | | | | | | | | | | | | | | | Newly whitelisted laptops include: * ThinkPad R400 * ThinkPad T500 * ThinkPad W500 * Libiquity Taurinus X200 Change-Id: I772f8e109c56a5fd40f6b1aff0f592b915669c17 Signed-off-by: Leah Rowe <leah@libreboot.org> Reviewed-on: https://review.coreboot.org/23781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* Whitelist Roda/RV11 laptopNico Huber2017-06-141-0/+1
| | | | | | | | Change-Id: I036c1f8cb914c8e3cca9d17eb221b582d7414ae9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Add iMac5,2 to board_enableArthur Heymans2017-04-161-0/+1
| | | | | | | | | | | | When running coreboot everything works, while on vendor bios it fails to erase anything until the 3th erase function of a SST25VF016B is tried. Change-Id: I5e4daaa67f98a47e237cd73962776da369c8f0b5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18943 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
* Add a bunch of new/tested stuff and various small changes 25Stefan Tauner2016-03-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock Fatal1ty 970 Performance and P4i65G Reported by anonymous email message ID: 932677687262b1300eaf14260999d9262c31@guerrillamail.com The latter actually had a tested board enable already. Flash chips: - Eon EN25Q128 to PREW (+PREW) Reported by Adrian Graham - GigaDevice GD25VQ41B to PREW (+PREW) Reported by David Hendricks - Winbond W39V040FB to PREW (+EW) Reported by fjed on IRC Miscellaneous: - Change PCI IDs of "MS-6577 (Xenon)" board enable. The previous IDs contained the on-board display adapter which is disabled when a dedicated graphics card is installed. - Add a note to the README how to overcome the clang warning if only a single programmer is enabled. - Fix some typo and manpage problems found by lintian - r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that. - Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable. Previous PCI IDs were board-specific but ot the other of devices that could be disabled by the firmware or that vary among hardware revions. There are no good alternatives available. However, since we always have a DMI decoder available now, we can use non-board-specific devices without taking risks. Thanks to Uwe Hermann for reporting and testing. - Some other small changes to clean up whitespace and fix some warnings from Debian's lintian. Corresponding to flashrom svn r1951. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 24Stefan Tauner2016-01-231-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock G31M-GS Reported by Александр Трубицын - ASRock G41M-VS3 Reported by Александр Трубицын - ASRock N68C-S UCC Reported by Alexey Belyaev - ASRock AMCP7AION-HT (ION 330HT(-BD)) Reported by Stefan Tauner - ASUS P5K SE Reported by Александр Трубицын - ASUS P5KPL-VM Reported by Marin Vlah - ASUS RAMPAGE III GENE Reported by stevessss on IRC - GIGABYTE GA-945GM-S2 Reported by Александр Трубицын - GIGABYTE GA-945GCM-S2 (rev. 3.0) Reported by Александр Трубицын - GIGABYTE GA-965P-S3 Reported by Александр Трубицын - GIGABYTE GA-EG43M-S2H Reported by Александр Трубицын - GIGABYTE GA-EP31-DS3L (rev. 1.0) Reported by Александр Трубицын - GIGABYTE GA-G33M-S2 Reported by Александр Трубицын - GIGABYTE GA-G33M-S2L Reported by Александр Трубицын - GIGABYTE GA-H55M-S2 Reported by Александр Трубицын - GIGABYTE GA-J1900N-D3V Reported by Marcos Truchado and Guillermo von Hünefeld - GIGABYTE GA-K8NS Reported by nicolae788 - GIGABYTE GA-M56S-S3 Reported by Estevo Paz Freire - GIGABYTE GA-P31-DS3L Reported by Александр Трубицын - GIGABYTE GA-P31-S3G Reported by Александр Трубицын - MSI MS-7336 Reported by Benjamin Bellec - MSI X79A-GD45 (8D) (MS-7760)" Reported by mortehu on IRC - Supermicro A1SAi-2550F Reported by Bernard Grymonpon - Supermicro X7DWT Reported by Steven Stremciuc Laptop: - ASUS U38N Reported by Ultra on IRC - Dell Latitude D630 Reported by Márton Miklós - Fujitsu Amilo Xi 3650 Reported by Elmar Stellnberger - Lenovo T400 (whitelisting only) Chipsets: - Mark 8086:1f38 (Intel Avoton/Rangeley) as tested Reported by Jeremy Porter and Bernard Grymonpon - Add Intel Sunrise Point IDs but no support yet. Flash chips: - Atmel AT45DB321D to PREW (+PREW) Reported by The Raven - Eon EN25QH32 to PREW (+PREW) Reported by Josua Mayer - Eon EN25QH64 to PREW (+EW) Reported by David s. Alessio - GigaDevice GD25LQ64(B) to PREW (+PREW) Reported by Greg Tippit - Intel 28F001BN/BX-T to PREW (+EW) Reported by Lu Xie - Micron M25P10-A to PREW (+W) Reported by the Raven - Micron M25PE40 Reported by David Wood - Micron N25Q128..3E to PREW (+PREW) Reported by Miklós Márton - Macronix MX25L3273E to PREW (+PREW) Reported by Roklobsta on IRC - Macronix MX23L6454 to PR (+PR) Reported by Steven Honeyman - Macronix MX25U6435E/F to PREW (+PREW) Reported by Marcos Truchado and Guillermo von Hünefeld - PMC Pm25LQ032C to PREW (+EW) Reported by Dirk Knop - Spansion S25FL016A to PREW (+EW) Reported by Márton Miklós - Spansion S25FL128S......0 to PREW (+PREW) Reported by Jim Houston - Spansion S25FL204K to PR (+PR) Reported by Thomas Debrunner - SST SST49LF016C to PREW (+EW) Reported by Steven Stremciuc - SST SST39VF040 to PREW (+PREW) Reported by Xavier Bourgeois - SST SST49LF040B to PREW (+EW) Reported by Rikard Åhlund - ST M25P10-A to PREW (+W) Reported by Martijn Schiedon - Winbond W39V040FA to PREW (+EW) Reported by Евгений Черкашин - Winbond W39V080FA to PREW (+EW) Reported by protagonist0 on IRC - Winbond W25Q80.W to PREW (+PREW) Reported by Miklós Márton - Winbond W25X64 to PREW (+REW) Reported by Johannes Krampf and Manuel Dejonghe - Fix ID of AMIC A25LQ64 Reported by Roman Titov - Fix page size of Spansion S25FL129P......1 Copy and paste error from the 128S uniform 256kB variant, probably. - Add Micron/Numonyx phase-change memory IDs Miscellaneous: - Detect Android target OS. No changes are required to build flashrom (excluding programmers with NEED_PCI) on Android. - Update rayerspi (spipgm) URL - Fix max_data_write handling of at45db. - Minor refinement of the README - Mark board enable for the GA-K8NS variants as tested. Tested by "nicolae788" on a board with socket 754. - Mark "Multi-system" chassis as non-laptop case. - Remove W836xx log requests. We got enough (and no one is looking at them for the time being anyway). - serprog: improve invalid reply error message, contributed by Urja Rannikko. - Remove default include paths for MinGW. - Disable implicit rules in the Makefile because we don't need them and they just make the build (imperceptibly) slower. - Enable our own strnlen() implementation not only on DJGPP but also if HAVE_STRNLEN is not defined. This is needed to get older BSDs (e.g. NetBSD 6.0, FreeBSD < 8.0) to work. - Tiny other stuff. Corresponding to flashrom svn r1917. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 23Stefan Tauner2015-03-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - Elitegroup GF7050VT-M Reported by Alex - Fujitsu D2724-A1x (used in ESPRIMO E5625) Reported by Rainer Spillmann - Teclast X98 Air 3G Reported by Antonio Ospite Flash chips: - Fix MX25L6405(D) definition by splitting it. Reported by Reggie McMurtrey - Add Macronix MX25L..08E family and rearrange MX25L6436E. - Pm49FL004 to PREW (+EW) Reported by Georg Sauthoff Miscellaneous: - Add board enable for abit KN9 Ultra. - Mark ARM-USB-OCD as working OK. - Use "mobile devices" instead of "laptops" in output. - Tiny other stuff. Corresponding to flashrom svn r1886. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine version check of libpci function pci_get_devStefan Tauner2015-02-081-1/+1
| | | | | | | | | | | | | The way more elegant check for the header fails unfortunately on CentOS 4.9 because PCI_LIB_VERSION is not defined at all although the domain parameter is present. This patch jumps through the hoops via an additional check in the Makefile to determine if the function accepts 5 parameters (new version) or not (old version). Corresponding to flashrom svn r1880. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 22Stefan Tauner2015-02-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - AOpen UK79G-1394 (used in EZ18 barebones) Reported by Lawrence Gough - ASUS M4N78 SE Reported by Dima Veselov - ASUS P5LD2-VM Mark board enable as tested (reported by Dima Veselov) - GIGABYTE GA-970A-UD3P (rev. 2.0) Reported by trucmar on IRC - GIGABYTE GA-990FXA-UD3 (rev. 4.0) Reported by ROKO__ on IRC - GIGABYTE GA-H77-DS3H (rev. 1.1) Reported by Evgeniy Edigarev - GIGABYTE GA-P55-USB3 (rev. 2.0) Reported by Måns Thörnqvist - MSI MS-7817 (H81M-E33) Reported by Igor Kolker Chipsets: - Marked Intel Bay Trail (0x0f1c) as tested OK Reported by Antonio Ospite - Refine Intel IDs * Add IDs for Braswell * Add IDs for 9 Series PCHs (e.g. H97, Z97) * Rename Wellsburg devices slightly Flash chips: - Atmel AT25DF041A to PREW (+PREW) Reported by Tai-hwa Liang - Atmel AT26DF161 to PREW (+EW) Reported by Steve Shenton - Atmel AT45DB011D to PREW (+PREW) Reported by The Raven - Atmel AT45DB642D to PREW (+PREW) Reported by Mahesh Mokal - Eon EN25F32 to PREW (+PREW) Reported by Arman Khodabande - Eon EN25F40 to PREW (+REW) Reported by Jerrad Pierce - Eon EN25QH16 to PREW (+EW) Reported by Ben Johnson - GigaDevice GD25Q20(B) to PREW (+PREW) Reported by Gilles Aurejac - Macronix MX25U6435E/F to PR (+PR) Reported by Matt Taggart - PMC Pm25LV512(A) to PREW (+PREW) Reported by The Raven - SST SST39VF020 to PREW (+PREW) Reported by Urja Rannikko - Winbond W25Q40.V to PREW (+EW) Reported by Torben Nielsen - Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E). - Add MX25L6465E variant. - There was never a MX25L12805 AFAICT. - Split MX25L12805 from models with the same ID but an additional 32 kB eraser: MX25L12835F/MX25L12845E/MX25L12865E. - Add a bunch of ST parallel NOR flash chip IDs. Miscellaneous: - Whitelist ThinkPad X200. - Constify master parameter of register_master(). - Remove FEATURE_BYTEWRITES because it was never used at all. - Refine hwseq messages and make them less prominent. - Fix the yet unused PRIxCHIPADDR format string thingy. - Fix copy&paste error in spi_prettyprint_status_register_bp(). Spotted by Pablo Cases. - Add an additional SMBus controller revision to identify another Yangtze model. Thanks to Dan Christensen for reporting this issue. - dediprog: add missing include for stdlib.h. This fixes (at least) building on FreeBSD and DragonflyBSD with gcc. - Remove references to struct pci_filter from programmer.h. It is only needed in internal.c where it has a complete type. Having it in programmer.h provokes a warning by some old versions of gcc. - Tiny other stuff. Corresponding to flashrom svn r1879. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix the --mainboard parameter that controls board enablesStefan Tauner2015-01-241-7/+11
| | | | | | | | | | | | We refactored board_match_name()/--mainboard handling in r1577 and apparently broke it because since then we were always comparing to the respective coreboot values of board and vendor names instead of the user-supplied strings. Corresponding to flashrom svn r1871. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for GIGABYTE GA-8SIMLFS 2.0Stefan Tauner2014-11-301-0/+2
| | | | | | | | | | | This board was used/sold by Fujitsu. The board enabled was tested (sadly with the wrong image, i.e. one of the GA-8SIMLH images directly from GIGABYTE instead of one from Fujitsu). Corresponding to flashrom svn r1855. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 21Stefan Tauner2014-08-061-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by luxflow@live.com using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add Board Enable for ASUS Vintage 2 PH1 (P5LD2-MQ)Dima Veselov2014-07-141-0/+2
| | | | | | | | | | | | ASUS Vintage 2 PH1 barebone systems have a mainboard from the P5LD2 series, namely the P5LD2-MQ (although it is labeled V2-PH1). Pin 16 GPIO needs to be raised to enable write/erase like on other boards of the series. NB: it uses a ICH7DH southbridge and hence requires different PCI IDs. Corresponding to flashrom svn r1828. Signed-off-by: Dima Veselov <kab00m@lich.phys.spbu.ru> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add selfcheck_board_enables()Stefan Tauner2014-06-121-0/+30
| | | | | | | | | | | | Check for NULL termination of the array, that each board has the two main PCI ID sets defined, that coreboot vendor and model fields are either both set or unset, and that at least either an enable function or a max decode size is available. Corresponding to flashrom svn r1821. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 20Stefan Tauner2014-05-031-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Corresponding to flashrom svn r1783. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for ASUS A7V8X-MXFrançois Revol2014-03-141-0/+1
| | | | | | | | | | | | Use the same trick as for the MX-SE variant. Despite being mentioned as supported on http://flashrom.org/Supported_hardware flashrom fails to detect the flash chip without this. Corresponding to flashrom svn r1766. Signed-off-by: François Revol <revol@free.fr> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for ASUS P5LD2-VM DHStefan Tauner2013-11-211-0/+3
| | | | | | | | | | | | | Tested on real hardware by TeslaBIOS. Besides the usual board_enable stuff the GPIO definitions for the ICH7 DH were also missing. Apparently Intel forgot to add the PCI IDs for the desktop version in the spec update, but the normal datasheet mentions the DH desktop version so this should be fine... Corresponding to flashrom svn r1764. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for abit BF6Stefan Tauner2013-10-261-2/+3
| | | | | | | | | | | | Because the board does not have any PCI subsystem IDs set and the DMI strings are not very specific at all, autodetection has been disabled. The GPIO was found by roxfan and the patch tested on hardware by Gelip, thanks! Corresponding to flashrom svn r1762. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add an internal DMI decoderSean Nelson2013-09-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we had to rely on dmidecode to decode the DMI/SMBIOS table. This patch integrates a DMI decoder into flashrom. The old behavior of calling dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no. Significant portions of this patch were taken from dmidecode, hence add its authors to the copyright notice (dmidecode is also GPL2+). We do a few things differently though. First of all we do more bounds checking to prevent accessing unmapped memory. We do not support disovery via EFI (yet), but memory scanning only. We handle the chassis-type lock bit correctly which dmidecode did not for a long while. The API to the rest of flashrom remains stable, but the output changes slightly. To share as much code as possible (which actually is not much), i have added dmi_fill methods that get called in dmi_init. They are reponsible to fill the dmi_strings array and setting the is_laptop variable. After it is called, dmi_init prints all dmi_strings. Previously the strings were printed in the order they were discovered, followed by the chassis-type, which is now output earlier (in dmi_fill). Because DJGPP does not support strnlen a simple implementation was added for it. This is still only available on x86; actually it is not even compiled in for other architectures at all anymore. Corresponding to flashrom svn r1735. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for Bcom WinNET P680Corey Osgood2013-09-101-0/+1
| | | | | | | | | | | | | This patch replaces Alex Mauer's previous patch for this board (from 2008). Tested to read, erase, and write on 2 different boards, both with AMIC A29040BL flash chips, using both stock BIOS and coreboot images. This patch marks the AMIC chip as tested at the same time. Corresponding to flashrom svn r1733. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 19Stefan Tauner2013-08-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS P8H77-V LE http://www.flashrom.org/pipermail/flashrom/2013-June/011127.html - HP Pegatron IPMEL-AE (Evans-GL6) Reported by Idwer on IRC - MSI MS-7379 (G31M) http://paste.flashrom.org/view.php?id=1726 - MSI MS-7816 (H87-G43) http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html - MSI MS-9830 (IM-945GSE-A, A9830IMS) http://paste.flashrom.org/view.php?id=1730 - Supermicro X8SAX http://paste.flashrom.org/view.php?id=1717 NOT OK: - Intel D2700MUD http://paste.flashrom.org/view.php?id=1723 - Intel DQ45CB http://www.flashrom.org/pipermail/flashrom/2013-August/011369.html Chipsets: - Add PCI ID for Intel's Coleto Creek. - Mark Intel H87 (0x8c4a) as OK. http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html Miscellaneous: - ichspi: Fix printing address ranges if space is divided by FPB. - Tiny other stuff. Corresponding to flashrom svn r1709. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Detect AMD Yangtze (found in Kabini and Tamesh)Stefan Tauner2013-08-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | The PCI ID of the LPC bridge doesn't change between Hudson-2/3/4 and Yangtze (Kabini/Temash) but the SPI interface does. Bail out in case we detect Yangtze and add infrastructure to distinguish other families too for further refactorings. Also, add ASRock IMB-A180 to the laptop whitelist and refine the IMC warning a bit. Tested on ASRock IMB-A180 with and w/o USE_YANGTZE_HEURISTICS, and by Chris Goodrich from Sage on - SB600 - SB700 - SB800 - Hudson 3 (A70M) - Kabini Corresponding to flashrom svn r1706. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 18Stefan Tauner2013-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS C60M1-I http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html - ASUS P8H77-I http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - ASUS P8H77-M http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html - ASUS P8P67 LE (B2) http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html - Elitegroup GeForce6100PM-M2 (V3.0) http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html - GIGABYTE GA-P55A-UD7 http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html - MSI B75MA-E33 (MS-7808) http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - MSI H77MA-G43 (MS-7756) http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html - MSI KA780G (MS-7551) http://paste.flashrom.org/view.php?id=1617 - SAPPHIRE IPC-E350M1 Reported by xvilka on IRC - Supermicro X8DTG-D http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html NOT OK: - ASRock Fatal1ty Z77 Performance http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html - ASRock Z68 Extreme4 http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html - ASUS P8B75-M LE http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html - ASUS P8P67-M PRO http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html - ASUS P8Z68-V LE http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html - Intel DQ77MK http://paste.flashrom.org/view.php?id=1603 - Supermicro X9DRD-7LN4F http://paste.flashrom.org/view.php?id=1582 - Supermicro X9SCE-F http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html - Supermicro X9SCM-F http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html - Tyan S7066 http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html Chipsets: - Marked Intel B75 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - Marked Intel H77 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - Removed 10de:03e2 because it is apparently the MCP61 host bridge. It was reclassified to Host Bridge in the PCI device ID database and there is at least one report suggesting this configuration too: http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html - Added MCP89 which hopefully works with the code for previous versions. Thanks to James Laird for submitting this change. Tested flash chips: - Atmel AT25DF641(A) to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html - Atmel AT25F512 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html Also, change its ID according to Modification of PCN SC040401A: "There has been a change in the returned value of the Product Identification (RDID) command, the AT25F512A RDID code is 65h compared to 60h from the AT25F512 product." It seems to be quite likely that all AT25F512 are fully functional relabeled AT25F1024 chips. There are even some hints in the datasheet: in table 6 they stress that address pin 16 needs to be low under all circum- stances; while continuous reads can wrap around on the AT25F1024 the DS notes "For the AT25F512, the read command must be terminated when the highest address (00FFFF) is reached." OTOH the lock bit semantics are different, but this has not been tested thoroughly - Atmel AT25F512A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1569 - Eon EN25F05 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1571 - Macronix MX25L12805(D) to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html - Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P) Tested by Stefan Tauner - Micron/Numonyx/ST M25PX80 to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P) Tested by Stefan Tauner - SST SST25VF040B to PREW (+PREW) http://paste.flashrom.org/view.php?id=1574 - SST SST25VF040B.REMS to PREW (+EW) http://paste.flashrom.org/view.php?id=1575 - ST M25P05-A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1576 - ST M29W512B to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html - Winbond W25Q64.W to PREW (+PREW) Tested by the chromiumos guys. - Winbond W25Q128.V to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html - Winbond W25X20 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html Miscellaneous: - Add Lenovo X201 to the laptop whitelist. - Add chip IDs for the ESMT F25L..QA family. - Add chip IDs for a few Macronix MX25 models. - The list of flashchips is not sorted strictly alphabetically and should not be either. Refine the comment explaining the scheme on top of the list. - Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb). - Use z length modifier in (more) prints for size_t types. - Remove chips >16MB again because our current implementation of memory mapping the flash chip violates common rules by mapping a window as large as the chip. This leads to failing mmaps as can be seen here: http://paste.flashrom.org/view.php?id=1695 - Document spispeed parameter of linux_spi (and fix some leaks). - Rephrase the "multiple chips detected" message because it was confusing. - Skip verification step if the image is equal to the flash contents. - Tiny other stuff. Corresponding to flashrom svn r1702. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add (untested) board enable for ASUS P4PE-X/TEStefan Tauner2013-03-041-0/+1
| | | | | | | | | REed by roxfan and Michael Karcher, patch by Stefan Tauner. Corresponding to flashrom svn r1653. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce msg_*warnStefan Tauner2013-01-041-5/+5
| | | | | | | | | | Also, unify all outputs of "Warning:" and "Error:" to use normal capitalization instead of mixing it with all capitals. Corresponding to flashrom svn r1643. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Add a bunch of new/tested stuff and various small changes 16Stefan Tauner2013-01-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Acer V75-M (used in IBM Aptiva 2170-G http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - ASRock 4CoreDual-VSTA with W39V040FB http://paste.flashrom.org/view.php?id=1446 - ASRock 775Dual-VSTA http://www.flashrom.org/pipermail/flashrom/2012-December/010294.html - ASRock E350M1/USB3 http://paste.flashrom.org/view.php?id=1465 - ASUS P5B-VM http://www.flashrom.org/pipermail/flashrom/2012-December/010351.html - ASUS SABERTOOTH 990FX R2.0 http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Elitegroup A928 (including a laptop whitelist board enable) http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html - EVGA 122-CK-NF68 Reported by Stephanie Daugherty on IRC http://paste.flashrom.org/view.php?id=1431 - GIGABYTE GA-A75M-UD2H Reported by Soul_keeper on IRC http://paste.flashrom.org/view.php?id=1490 - Intel D945GCNL Add board enable to override laptop detection too. http://www.flashrom.org/pipermail/flashrom/2012-December/010276.html - MSI G33M (MS-7357) http://www.flashrom.org/pipermail/flashrom/2012-October/010056.html - Shuttle FB61 http://www.flashrom.org/pipermail/flashrom/2012-November/010105.html - Tyan S4882 (Thunder K8QS Pro) Reported on IRC NOT OK: Alienware Aurora-R2 http://www.flashrom.org/pipermail/flashrom/2012-December/010225.html Biostar H61MU3 http://www.flashrom.org/pipermail/flashrom/2012-November/010144.html Dell OptiPlex 7010 http://paste.flashrom.org/view.php?id=1481 Intel DH67CL http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html Supermicro X9DRT-HF+ http://www.flashrom.org/pipermail/flashrom/2012-November/010155.html Supermicro X9DRW http://www.flashrom.org/pipermail/flashrom/2012-November/010150.html Tested flash chips: - Atmel AT25FS010 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1484 - Eon EN25F64 to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Spansion S25FL032A/P to PREW (+EW) http://paste.flashrom.org/view.php?id=1510 - ST M29F002T/NT to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - Winbond W25X10 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1486 Tested chipsets: - NVIDIA MCP78S http://www.flashrom.org/pipermail/flashrom/2012-November/010176.html - SiS 650 http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html Miscellaneous: - Typo in GA-X58A-UDR3 (correct is GA-X58A-UD3R). - Force 2-digit hex numbers in prints were it makes sense. - Share code between enable_flash_sis530() and enable_flash_sis540(). - Some SST 25 series chips support both WRSR enable commands... - S25FL032A and S25FL064A share the IDs with their P versions, so rename them. - Fix a few memleaks in serprog. - Dediprog uses UINT_MAX so include limits.h (fixes the Windows build of dediprog) - Add (another) hint regarding the mandatory -p parameter to the manpage to make Debian bug #690478 happy. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690478 - Fix whitespace issues. - On shutdown, reset count of registered programmers (by Nico Huber) - Fix atahpt.c shutdown. The order of pcidev_init, register_shutdown and rpci_write_* is important! Thanks to Roy for reporting the problem and testing the fix. Corresponding to flashrom svn r1640. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add (untested) board enable for Asus DSAN-DXStefan Tauner2012-11-051-0/+2
| | | | | | | | | | | IDs are from the host bridge and LPC controller. The enable function was reverse engineered by roxfan, thanks! User mezzo vanished without reporting any test results. Corresponding to flashrom svn r1622. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 15Stefan Tauner2012-10-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Foxconn P55MX http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html Tested flash chips: - Eon EN25F64 to PR (+PR) http://paste.flashrom.org/view.php?id=1426 - Macronix MX25L1005 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html - Set SST39VF512 to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html Tested chipsets: - Z77 (only reading was really tested) Miscellaneous: - Fix ft2232_spi's parameter parsing. - Fix nicrealtek's init (always segfaulted since r1586 oops). - Add another T60 variant to the laptop whitelist. - Improve message shown when image file size does not match flash chip - Refine messages regarding the flash descriptor override strap according to the findings by Vladislav Bykov on his P55MX. - Fix the ID of EN25F64. - Demote and clarify debug message in serprog_delay(). - Minor other cleanups. Corresponding to flashrom svn r1613. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Whitelist known working Thinkpads of the T60 and X60 seriesStefan Tauner2012-09-251-0/+13
| | | | | | | | | | | | | | This should get rid of the need to specify the laptop force parameter on T60 and X60 series Thinkpads (including T60s and X60s) that are using one of the Intel 94x northbridges and are known to have no interfering EC. Please note that although the EC is no problem, flashrom is not able to access the entire flash chip with the vendor BIOS, see the coreboot wiki for details: http://www.coreboot.org/Lenovo_x60x Corresponding to flashrom svn r1606. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Fix flashrom running on boards with corebootStefan Tauner2012-09-241-5/+15
| | | | | | | | | | | | | | In r1577 we removed the discrimination of coreboot IDs and user-specified mainboards. The problem is that the board enable code required to find a board enable if either of these model strings were set. Therefore boards running coreboot that do not need a board enable failed to execute flashrom since then. This patch fixes this by handling coreboot IDs and user-supplied IDs differently again. Corresponding to flashrom svn r1605. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Add a bunch of new/tested stuff and various small changes 14Stefan Tauner2012-09-211-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - ASUS M3A78-EH http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html - ASUS P2B-LS http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html - Biostar TA790GX A3+ http://paste.flashrom.org/view.php?id=1350 - ECS 848P-A7 http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html - GIGABYTE GA-G41MT-S2PT Reported on IRC - GIGABYTE GA-H77-D3H Reported and tested by Alexander Gordeev on IRC. - Gigabyte GA-X79-UD5 http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html - Shuttle FN78S http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - VIA EITX-3000 Reported on IRC by Tuju NOT OK: - Dell PowerEdge C6220 (0HYFFG) http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html - Foxconn Q45M http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html - MSI MS-7309 (K9N6SGM-V) http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html - Supermicro X9QRi-F+ http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - ZOTAC H61-ITX WiFi (H61ITX-A-E) http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html ASUS CUSL2-C has been tested to be working with the board enable once implemented for the TUSL2-C board. They seem to have the same PCI IDs as shown in the links below. Since only the CUSL2-C board enable has been tested yet, we distinguish the two by DMI strings. http://paste.flashrom.org/view.php?id=1393 http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml Tested flash chips: - Set EMST F25L008A to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - Set GigaDevice GD25Q64 to PREW (+PREW) http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea - Set Macronix MX25L12805 to P (+P) http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - Set SST SST49LF003A/B to PREW (+EW) http://paste.flashrom.org/view.php?id=467 - Set Winbond W49V002FA to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html Tested chipsets: - Intel X79 (0x1d41) http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html Board enables: - add ASUS P4P800-X Created by Idwer Vollering and tested by Mingsen Bao: http://paste.flashrom.org/view.php?id=467 - add DMI string to P4P800-VM Miscellaneous: - Add remaining Intel 7 series chipset (LPC) PCI IDs - Add generic SPI detection for chips from Winbond - Minor manpage changes - Minor other cleanups - Escape full stops after abbreviations in the manpage. - Add ICH9 and successors to spi_get_valid_read_addr Corresponding to flashrom svn r1601. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for MSI K8N Neo PlatinumStefan Tauner2012-09-151-0/+2
| | | | | | | | | | | It's the same as for the Neo2. Thanks to roxfan and twice11 who did the RE! Corresponding to flashrom svn r1597. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Jud Porter Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add untested board enable for ASUS P5LD2-VMIdwer Vollering2012-09-071-0/+2
| | | | | | | | | | | Based on http://patchwork.coreboot.org/patch/2881/ but with the right pin (i.e. 16) according to Joshua Roys. Corresponding to flashrom svn r1596. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Try to remove all read and write locks on CK804 (and MCP51)Jonathan Kollasch2012-09-041-22/+0
| | | | | | | | | | | | | | | | | | | | We made a first step into this direction in r1405, but failed to notice that there was already an extended patch by Jonathan which was refined to become this one. Allows the removal of board_shuttle_fn25 (which was also intended to be used on the ASUS A8N-SLI Deluxe, but this was never tested). Corresponding to flashrom svn r1593. A previous iteration was tested on CK804 and Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> which was then Acked-by: Stefan Reinauer <stepan@coreboot.org> Rebasing, refining and making errors non-fatal is Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Some ISO C fixesCarl-Daniel Hailfinger2012-08-271-1/+2
| | | | | | | | | | | | | | | | | This patch just fixes a limited number of bits not conforming to c99 by using - __asm__ instead of just asm - {0} instead of {} for struct initialization - h_addr_list[0] instead of h_addr to access the host address in struct hostent - #include <strings.h> where needed (for ffs and strcasecmp) Based on a previous patch by Carl-Daniel. Corresponding to flashrom svn r1585. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add untested board enable for DFI AD77Tadas Slotkus2012-08-251-0/+2
| | | | | | | | | | | | Corresponding to flashrom svn r1581. Based on http://patchwork.coreboot.org/patch/2983/ Signed-off-by: Tadas Slotkus <devtadas@gmail.com> PCI IDs are generic therefore requiring manual activation. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix VIA VX*** supportHelge Wagner2012-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | Helge Wagner's patch that added VIA VX900 chipset support made me look closer at the datasheets which led to some concise documentation about newer VIA chipsets: http://flashrom.org/VIA Based on that this patch adds full support for VX800/VX820, VX855/VX875 and VX900, including SPI and LPC. VT8237S was not changed (SPI support only) because there is no public datasheet and it is not clear how to distinguish between LPC and SPI strapping and investigations in (NDAed) documents have not brought up anything conclusively. enable_flash_vt823x could probably be enhanced too due to various ignored LPC options of the chipset. Corresponding to flashrom svn r1578. Signed-off-by: Helge Wagner <Helge.Wagner@ge.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor the -p internal:mainboard handlingStefan Tauner2012-08-201-62/+77
| | | | | | | | | | | | | | | | This patch gets rid of some global variables and makes lots of bits along the code path that control the board enable execution more generic and clearer. From now on flashrom aborts on a few more occasions that should be safer for the user. For example it aborts if the enable function for the specified mainboard (enable) can not be found. Parts of the board_match_cbname refactoring were done by Carl-Daniel. Corresponding to flashrom svn r1577. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix broken board enablesStefan Tauner2012-08-111-3/+3
| | | | | | | | | | | | Abit KN8 Ultra, agami/island aruma and IWILL DK8-HTX had no secondary PCI IDs which complicates things. Some google foo discovered some appropriate IDs, but they are all untested. Let's pretend this breaks nothing. Corresponding to flashrom svn r1568. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 19:46:48 +0000