summaryrefslogtreecommitdiffstats
path: root/flash.h
Commit message (Collapse)AuthorAgeFilesLines
* Support for Realtek RTL8139 network card flashingJoerg Fischer2010-05-211-1/+17
| | | | | | | Corresponding to flashrom svn r1002. Signed-off-by: Joerg Fischer <turboj@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix assorted documentation, frontend and printing bugsCarl-Daniel Hailfinger2010-05-151-0/+1
| | | | | | | | | | Change the command line interface to make file names positional. Add more sanity checks to the command line parser. Corresponding to flashrom svn r998. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* One of the problems is that --force had multiple meaningsCarl-Daniel Hailfinger2010-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Force chip read by faking probe success. - Force chip access even if the chip is bigger than max decode size for the flash bus. - Force erase even if erase is known bad. - Force write even if write is known bad. - Force writing even if cbtable tells us that this is the wrong image for this board. This patch cleans up --force usage: - Remove any suggestions to use --force for probe/read from flashrom output. - Don't talk about "success" or "Found chip" if the chip is forced. - Add a new internal programmer parameter boardmismatch=force. This overrides any mismatch detection from cbtable/image comparisons. - Add a new internal programmer parameter laptop=force_I_want_a_brick. - Adjust the documentation for --force. - Clean up the man page a bit whereever it talks about --force or laptops. Additional changes in this patch: - Add warnings about laptops to the documentation. - Abort if a laptop is detected. Can be overridden with the programmer parameter mentioned above. - Add "Portable" to the list of DMI strings indicating laptops. - Check if a chip specified with -c is known to flashrom. - Programmer parameter reliability and consistency fixes. - More paranoid self-checks. - Improve documentation. Corresponding to flashrom svn r996. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Intel 28F004/28F400 supportMichael Karcher2010-04-031-1/+1
| | | | | | | | | | | | | | | | | Remove blockwise write for i82802ab chips. It will be reintroduced in post-0.9.2 in a generic way. This is needed to fix FWH-like chips with non-uniform sectors. These are: Intel 28F001 Sharp LHF00L04 ST M50FW002 ST M50LPW116 Corresponding to flashrom svn r991. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multibyte SPI write for the Bus PirateCarl-Daniel Hailfinger2010-03-221-0/+1
| | | | | | | Corresponding to flashrom svn r964. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Write granularity is chip specificCarl-Daniel Hailfinger2010-03-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | The following write granularities exist according to my datasheet survey: - 1 bit. Each bit can be cleared individually. - 1 byte. A byte can be written once. Further writes to an already written byte cause the contents to be either undefined or to stay unchanged. - 128 bytes. If less than 128 bytes are written, the rest will be erased. Each write to a 128-byte region will trigger an automatic erase before anything is written. Very uncommon behaviour. - 256 bytes. If less than 256 bytes are written, the contents of the unwritten bytes are undefined. Note that chips with default 256-byte writes, which keep the original contents for unwritten bytes, have a granularity of 1 byte. Handle 1-bit, 1-byte and 256-byte write granularity. Corresponding to flashrom svn r927. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: David Hendricks <dhendrix@google.com>
* Implement tested/untested status for board enablesMichael Karcher2010-02-281-0/+2
| | | | | | | | | | | | | | | The message printing code greatly exceed the 80 character limit. I can reformat it on request to obey the limit. Intended behaviour: on untested boards an explanation of that status is printed and the board enable code is not run, unless the option "boardenable=force" has been passed to the internal programmer. Corresponding to flashrom svn r919. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Warn if running on laptopsMichael Karcher2010-02-261-0/+1
| | | | | | | Corresponding to flashrom svn r916. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-2/+0
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Replace PCI_OK/PCI_NT by OK/NTMichael Karcher2010-02-241-2/+0
| | | | | | | | | | We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table). Corresponding to flashrom svn r911. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add initial (non-working) code for Highpoint ATA/RAID controllersUwe Hermann2010-02-211-1/+13
| | | | | | | | | | It's disabled by default. The current status is detailed at: http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html Corresponding to flashrom svn r908. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Here's a very quick patch to fix the missing unlock codeSean Nelson2010-02-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Fixes missing unlock for certain chips: * unlock_49lf00x * Pm49fl002 * Pm49fl004 * unlock_49flxxxc * SST49LF160C * unlock_winbond_fwhub * W39V080FA * W39V080FA (dual mode) Fixes missing printlock for certain chip: * printlock_w39v040c * W39V040C Corresponding to flashrom svn r907. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Allow the registration of functions to be called at programmer shutdownCarl-Daniel Hailfinger2010-02-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some programmers want to run certain functions during programmer shutdown, but the function choice depends on the code path taken during programmer init. Rather than rebuilding the whole init logic in the shutdown function, it is now possible to register functions for execution on programmer shutdown. The behaviour is similar to atexit(), but the registered functions will be run on programmer shutdown instead of on exit and the functions will be called with a void * argument that is specified on registration. Registered functions must have the prototype void function(void *); and will be executed in reverse registration order directly before calling the programmer-specific shutdown() function. It is recommended to have shutdown() only disable programmer/hardware access and leave all code path sensitive shutdown to functions registered with register_shutdown(). The most prominent use case is resetting the EC after flashing on laptops. Note: There are quite a few code paths in flashrom which proceed to terminate flashrom without any programmer shutdown. Those code paths will not get the benefit of register_shutdown() and they should be changed wherever possible. Corresponding to flashrom svn r904. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* At long last, the day has come, and we can bury full-chip erase once and for allCarl-Daniel Hailfinger2010-02-111-1/+0
| | | | | | | | | | | | | | Back in November 2008(!) I proposed the first version of the flexible sector-based erase structure, and now we can finally rip out the old full-chip erase code without ill effects. Rejoice and party! Thanks to everyone who made this possible, especially to Sean Nelson who converted the majority of flash chips to sector erase. Corresponding to flashrom svn r895. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Create a physical memory mapping function which requests cached readonly memoryCarl-Daniel Hailfinger2010-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | This should take care of picky Linux kernels which do not allow uncached mappings to cached areas. Handle mapping failure gracefully (no forced exit()) if the caller specifies it. Such cached areas which can handle mapping failure are DMI tables and coreboot tables. On failure we just ignore those tables. That is not perfect, but a lot better than aborting flashrom due to an error in nonessential functionality. This should fix flashrom on a sizable number of machines where it currently aborts early. Yes, I could have exploited a Linux kernel bug to "solve" this, but relying on such bugs is not exactly the best idea. Corresponding to flashrom svn r889. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Vincent Pelletier <plr.vincent@gmail.com>
* Complete the addition of Feature Bits for all Jedec based chipsSean Nelson2010-01-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add FEATURE_SHORT_RESET, FEATURE_LONG_RESET, and FEATURE_EITHER_RESET rewrite jedec functions to use getaddrmask convert write_49f002 to write_jedec_1 convert write_w39v040c to write_jedec_1 convert probe_w39v040c to probe_jedec convert write_49lf040 to write_jedec_1 convert write_pm29f002 to write_jedec convert write_29f040b to write_jedec_1 convert probe_29f040b to probe_jedec convert erase_chip_29f040b to erase_chip_block_jedec convert erase_sector_29f040b to erase_sector_jedec convert write_m29f002b to write_jedec convert write_m29f002t to write_jedec convert *_29f002 to *_jedec decouple unused files from Makefile: am29f040b.c en29f002a.c m29f002.c mx29f002.c pm29f002.c sst49lf040.c w39v040c.c w49f002u.c Corresponding to flashrom svn r886. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
* Boards: Add max_rom_decode_parallel entry to board enable tableLuc Verhaegen2010-01-201-0/+1
| | | | | | | | | This is a quick fix for board specific parallel addressing limits. Corresponding to flashrom svn r875. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Matching board via DMIMichael Karcher2010-01-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a board is not uniquely identifiable by PCI device/subsystem IDs, a string can be specified to be looked for (case-sensitive, substring or anchored) for now in one of the following DMI items in addition to matching the PCI IDs: - System Manufacturer - System Product Name - System Version - Baseboard Manufacturer - Baseboard Product Name - Baseboard Version Strings are anchored re-like (^ at the beginning, $ at the end), but there are no plans to support full regular expressions and matched to any of the mentioned fields. The match is only made if DMI info is available and the string matches. If no DMI info is available and the PCI IDs match, a warning is printed as the board can not be autodetected. It's still open to discussion whether we add an DMI override switch to specify a string that will definitely match, and whether this switch is only used if no DMI is available or whether it overrides or augments DMI data. DMI data is currently read using dmidecode. This tool is available for all major platforms except MacOS X. I heard that there also is a MacOS X version of dmidecode, but didn't investigate that. Corresponding to flashrom svn r874. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Dediprog SF100 supportCarl-Daniel Hailfinger2010-01-191-0/+12
| | | | | | | | | | | | | | | | | | | | | | | Reverse engineered from USB logs. I never touched that programmer nor did I ever see the associated software. Disabled by default until it is complete. The driver needs to be hooked up to the SPI core before it will do anything besides init and diagnostics. I successfully reverse engineered all commands, but some are still somewhat magic. Logs from "flashrom -p dediprog -V" are appreciated. Probe and read should work, erase/write is expected to explode. The programmer will set voltage to 0 on exit. Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB logs and for testing the result. Corresponding to flashrom svn r870. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Enable -Wshadow, clean code for thatMichael Karcher2010-01-121-1/+0
| | | | | | | | | | | | | | This is not just for fun. We hit a real bug on BSD with the outl macros. The macro variable tmp collided with the tmp from outer scope. second revision, now also taking care of inb/inw/inl. While that shadowing did not introduce bugs (yet), of course it breaks the build on BSD when -Wshadow is enabled. Corresponding to flashrom svn r860. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* Change msg_* macros to C99 variadic macrosCarl-Daniel Hailfinger2010-01-091-16/+16
| | | | | | | | | | | | | | | | | The msg_* macros won't compile as is if you use more than one parameter (i.e. have a format string and a variable). There are two alternative styles: GNU or C99 variadic macros. While C99 has limitations compared to the GNU extensions, these limitations do not affect our macros, so I decided to go with the standard way. I adjusted whitespace a bit to have aligned values (cosmetic change). Corresponding to flashrom svn r841. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use address mask in probe_jedecCarl-Daniel Hailfinger2010-01-091-2/+4
| | | | | | | | | | | | This allows us to have one common probe_jedec function instead of half a dozen wrappers. The trick here is to have FEATURE_ADDR_FULL==0 and thus default to unmasked addresses. That way, we only have to annotate chips which need small address masks. Corresponding to flashrom svn r840. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Converting fprintf(stderr), printf, and printf_debug into a common print ↵Sean Nelson2010-01-071-0/+19
| | | | | | | | | | | | | interface for flashrom It also changes so -VV will spit out highly verbose messages for debugging. This is a minimal patch to lessen impact a later patch will convert current printf messages to the new interface. Corresponding to flashrom svn r835. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move the CLI related functions main() and cli_usage() to cli_classic.cCarl-Daniel Hailfinger2010-01-071-0/+10
| | | | | | | | | | | | | | | | | | And rename them accordingly. For now, main() just calls cli_classic(), but alternative frontends can be switched in main(). Annotate remaining help texts with CLI dependency inside flashrom.c with a FIXME comment. Now people can go and create different frontends and be happy. Please note that any other frontend will have to sort of duplicate the probing code in cli_classic.c. Refactoring that part of the code is possible, but not easy because we still want to print instructive help messages for users. Corresponding to flashrom svn r833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Buspiratespi support on mingwPatrick Georgi2010-01-061-2/+13
| | | | | | | Corresponding to flashrom svn r832. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multiple unrelated changesPatrick Georgi2010-01-061-1/+0
| | | | | | | | | | | | | | | - replace the hand written serial input flush routine with the termios one. - serialport_discard_read isn't necessary anymore - it just wrapped sp_flush_incoming with no extra value. - serialport_read and serialport_write would misbehave if read or write didn't process everything in one go. - sp_flush_incoming should be #define'd out for FAKE_COMMUNICATION like serialport_discard_read was Corresponding to flashrom svn r831. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move OS-dependent serial code from buspirate_spi.c to serial.cCarl-Daniel Hailfinger2010-01-061-0/+4
| | | | | | | | | | While at it, also rename a few functions to make it obvious that they are generic and not specific to the Bus Pirate. Corresponding to flashrom svn r830. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* Move generic programmer function into newly introduced programmer.cCarl-Daniel Hailfinger2010-01-061-0/+2
| | | | | | | | | | | | | | Some programmers (most notably FT2232SPI) use fallback_* and noop_*, but those functions lived inside internal.c and were unavailable if no PCI-based programmers were compiled in. Move those functions to the new file programmer.c. Thanks to Patrick Georgi for finding this. Corresponding to flashrom svn r829. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* Generify jedec functions by introducing an address maskSean Nelson2010-01-041-0/+4
| | | | | | | | | | | | | | | | | The patch converts jedec functions into mask-based generics which can be used for many chip provided the only changes are the addresses are converted from 0x5555/0x2AAA to 0x555/0x2AA or similar. The patch mostly changes jedec.c, but a few other files are changed because they use the jedec functions within their own functions. The patch also adds a copyright line to flashchips.c because of my recent work in converting AMD and Atmel chips to use struct erase_block. Corresponding to flashrom svn r828. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Internal.c was always compiled in because it hosted the function ↵Carl-Daniel Hailfinger2009-12-241-1/+1
| | | | | | | | | | | | | internal_delay() Move that function to udelay.c and compile internal.c only if really needed. physmap.c is only needed if the programmer is internal or a PCI card. Make its compilation conditional. Corresponding to flashrom svn r822. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Factor out CLI code by moving generic stuff out of main()Carl-Daniel Hailfinger2009-12-241-0/+1
| | | | | | | | | | | | | Add a generic programmer list output function to be used by alternative frontends. The interface between main() and doit is a hack and should get a clean design, but for now it serves the purpose of shortening main() by 120 lines. The rest of main() needs to be refactored a bit more before moving main() away. Corresponding to flashrom svn r821. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* SuperI/O detection now happens unconditionally and before the chipset enableCarl-Daniel Hailfinger2009-12-221-0/+10
| | | | | | | | | | | | | | | | | We could run it after chipset enable, but it definitely has to happen before board enable because the board enable usually accesses the SuperI/O. With this patch, it is possible to add a struct superio to the board enable table for more accurate matching in case subsystem IDs are ambiguous. This patch focuses on the generic infrastructure aspect and on support for IT8712F/IT8716F. Thanks go to Adrian Glaubitz and Ward Vandewege for testing. Corresponding to flashrom svn r813. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* Clarify comment about how to enter chip erase functions in struct block_eraserCarl-Daniel Hailfinger2009-12-221-2/+2
| | | | | | | | | Reported by Sean Nelson. Corresponding to flashrom svn r811. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split hardware access, OS abstraction and chip drivers out of flash.hCarl-Daniel Hailfinger2009-12-141-216/+10
| | | | | | | | | | | | | | | | This patch is only the first step, but it hopefully will make working with the code and especially porting to new platforms easier. Subsequent patches should move #includes for the newly created files hwaccess.h and chipdrivers.h from flash.h to the files which need them. Programmers should live in a separate header file as well. Tested-by: Idwer Vollering <vidwer@gmail.com> Corresponding to flashrom svn r799. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Internal (onboard) programming was the only feature which could not be disabledCarl-Daniel Hailfinger2009-12-131-11/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make various pieces of code conditional on support for internal programming. Code shared between PCI device programmers and onboard programming is now conditional as well. It is now possible to build only with dummy support: make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no This allows building for a specific use case only, and it also facilitates porting to a new architecture because it is possible to focus on highlevel code only. Note: Either internal or dummy programmer needs to be compiled in due to the current behaviour of always picking a default programmer if -p is not specified. Picking an arbitrary external programmer as default wouldn't make sense. Build and runtime tested in all 1024 possible build combinations. The only failures are by design as mentioned above. Corresponding to flashrom svn r797. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Use common jedec functionality where appropriateMichael Karcher2009-11-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The deleted function in en29f002a.c is reintroduced as write_by_byte_jedec in jedec.c as it contains no chip-specific instructions. It is not yet used in other chip drivers, as key addresses (0x2AAA/0x5555) are often specified with less bits. After crosschecking datasheets, most of the fixmes can probably be resolved as indicated in them, causing significant code reduction. The common JEDEC code for bytewise programming does not program 0xFF at all. The chips that had a dedicated bytewise flash function which has been changed to write_jedec_1 thus changed flashing behaviour and the "write" test flag has been removed. This applies to: AMD Am29F002BB/Am29F002NBB AMD Am29F002BT/Am29F002NBT (TEST_OK_PREW before) AMIC A29002B AMIC A29002T (TEST_OK_PREW before) EON EN29F002(A)(N)B EON EN29F002(A)(N)T (TEST_OK_PREW before) Macronix MX29F001B (TEST_OK_PREW before) Macronix MX29F001T (TEST_OK_PREW before) Macronix MX29F002B Macronix MX29F002T (TEST_OK_PREW before) Macronix MX29LV040 Similar analysis should be performed for the read id stuff. Corresponding to flashrom svn r785. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine support for the JEDEC Software Data ProtectionMichael Karcher2009-11-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the extremely dangerous unprotect_jedec function which is not used at all within flashrom code, and renames the misleadingly named protect_jedec function to start_program_jedec. Calls to protect_jedec after flashing are removed, because a) on LPC chips, the command sent by protoct_jedec is not even in the datasheet and b) on parallel chips, the block write command issued before already contained the software protection sequence, so software protection is definitely enabled. This patch also removes two clones of protect_jedec Background: JEDEC Software Data Protection started as an optional feature, which was disabled on the first single-voltage-flash chips. The software data protection is the need to prefix a write with a magic "write enable" command, while without write protection every write access into the chip's address space modifies flash content. This magic write enable command also tells the flash chip that the programmer obviously support sending write-enable commands and turns off the "any write modifies flash content" mode. There also exist a two-command (6 writes) sequence that disables Software Data Protection completey, which should only ever be used to prepare updating with a device that can't handle software data protection. Corresponding to flashrom svn r783. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add the ability to set Bus Pirate SPI speed via the command lineCarl-Daniel Hailfinger2009-11-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | Example usage: flashrom -p buspiratespi:spispeed=2.6MHz,dev=/dev/foo flashrom -p buspiratespi:dev=/dev/foo,spispeed=2.6M Refactor programmer option parsing (this allows cleanups in other programmers as well). Increase SPI read size from 8 to 12 bytes (current single-transaction limit of the Bus Pirate raw SPI protocol). Add Bus Pirate to the list of programmers supporting 4 byte RDID. Add Bus Pirate syntax to the man page. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r776. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Cleanly validate ICH SPI preopcodesCarl-Daniel Hailfinger2009-11-241-0/+12
| | | | | | | | | | | | | | | | | | | The code should work on Linux/*BSD/MacOSX and relies on the serial code implementation in serial.c. Support for additional platforms (Windows) will have to be added to serial.c for this to work. For tests without a Bus Pirate (or with non-functional serial code) it is possible to #define FAKE_COMMUNICATION in buspirate_spi.c. Thanks to Sean Nelson for the SPI mode settings code. I tweaked it a bit to make configuration from a commandline easier should anybody want that feature. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r772. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move serial handling from serprog.c to serial.cCarl-Daniel Hailfinger2009-11-231-0/+3
| | | | | | | | | | | | | This is the first step in enabling platform independent serprog and it also allows other drivers to use serial port functionality without requiring serprog. Pure code move, no code changed. Corresponding to flashrom svn r771. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Bus Pirate support needs serial communicationCarl-Daniel Hailfinger2009-11-211-0/+3
| | | | | | | | | | | | Serprog already has such functionality, so it makes sense to share that. TODO: Factor out serial communication into a separate file, have that code be available even if serprog is not selected and make it portable (it is very Linux-centric right now). Corresponding to flashrom svn r768. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Refactor main loop in preparation of libflashromCarl-Daniel Hailfinger2009-11-171-4/+2
| | | | | | | | | | | | | | To prepare for libflashrom I wanted to make the main loop more readable and more correct and factor out stuff which can be useful in libflashrom. - Factor out printing of supported devices to print.c. - Adjust name of wiki printing function to fit the pattern. - Abort if the user specified --verify and --noverify at the same time. - Check for extra parameters which don't fit commandline syntax. Corresponding to flashrom svn r766. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add support for every single SiS chipset out thereCarl-Daniel Hailfinger2009-11-151-0/+1
| | | | | | | | | | | | | | | | | | | | | The two existing SiS chipset enables (compared to the 28 in this patch) were refactored, and one of them was fixed. A function to match PCI vendor/class combinations was added to generic code. Tested on the "Elitegroup K7S5A". Results are somewhat unexpected (some PCI settings seem to be inaccessible, but it still works). This is not based on any docs, but rather on detailed analysis of existing opensource code for some of the chipsets. Thanks to for Adrian Glaubitz testing. Corresponding to flashrom svn r759. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* Add infrastructure to check the maximum supported flash size of chipsets and ↵Carl-Daniel Hailfinger2009-10-311-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mainboards The rationale is to warn users when they, for example, try to flash a 512KB parallel flash chip but their chipset only supports 256KB, or they try to flash 512KB and the chipset _does_ theoretically support 512KB but their special board doesn't wire all address lines and thus supports only 256 KB ROM chips at maximum. This has cost Uwe hours of debugging on some board already, until he figured out what was going on. We should try warn our users where possible about this. The chipset and the chip may have more than one bus in common (e.g. SB600 and Pm49* can both speak LPC+FWH) and on SB600/SB7x0/SB8x0 there are different limits for LPC and FWH. The only way to tell the user about the exact circumstances is to spew error messages per bus. The code will issue a warning during probe (which does fail for some chips if the size is too big) and abort before the first real read/write/erase action. If no action is specified, the warning is printed anyway. That way, a user can find out why probe might not have worked, and will be stopped before he/she gets incorrect results. Add a bitcount function to the infrastructure. Corresponding to flashrom svn r755. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Make bitbang_spi naming consistentCarl-Daniel Hailfinger2009-10-011-7/+7
| | | | | | | Corresponding to flashrom svn r741. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add initial support for flashing some NVIDIA graphics cardsUwe Hermann2009-09-301-0/+10
| | | | | | | | | | | | | | | | | | | | The new option is '-p gfxnvidia', rest of the interface is as usual. I tested a successful identify and read on a "RIVA TNT2 Model 64/Model 64 Pro" card for now, erase and write did NOT work properly so far! Please do not attempt to write/erase cards yet, unless you can recover! In addition to the NVIDIA handling code it was required to call programmer_shutdown() in a lot more places, otherwise the graphics card will be disabled in the init function, but never enabled again as the shutdown function is not called. The shutdown handling may be changed to use atexit() later. Corresponding to flashrom svn r737. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* This is the bitbanging SPI driver infrastructureCarl-Daniel Hailfinger2009-09-281-0/+23
| | | | | | | | | | | | | If you want support for a particular piece of hardware, just fill in a few functions in spi_bitbang_master_table. That's it. On top of this, the RayeR SPI flasher should be supportable in ~20 LOC. Tested, trace looks OK. Corresponding to flashrom svn r736. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Switch SST49LF004A/B to block erase, remove the hack which simulated ↵Carl-Daniel Hailfinger2009-09-231-2/+4
| | | | | | | | | | | | | | | | | (unsupported) chip erase Annotate SST49LF004B quirks for TBL#. Add TEST_OK_PRW which is useful when a PREW chip gets a new erase routine. Change a few erase function prototypes to use unsigned int instead of int. Corresponding to flashrom svn r731. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Luc Verhaegen <libv@skynet.be>
* The current ICH SPI preop handling is a hack which spews lots of warnings, ↵Carl-Daniel Hailfinger2009-09-181-4/+4
| | | | | | | | | | | | | | | | | | but still yields correct results With the multicommand infrastructure I introduced in r645, it became possible to integrate ICH SPI preopcodes cleanly into the flashrom design. The new code checks for every opcode in a multicommand array if it is a preopcode. If yes, it checks if the next opcode is associated with that preopcode and in that case it simply runs the opcode because the correct preopcode will be run automatically before the opcode. Corresponding to flashrom svn r727. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
* Allow to exclude each of the external programmer drivers from being compiled inCarl-Daniel Hailfinger2009-09-161-2/+13
| | | | | | | | | | | | | | | Example make commandline if you want only internal programmers: make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no Of course, all of the CONFIG_* symbols can be mixed and matched as needed. CONFIG_FT2232SPI is special because even if it is enabled, make will check if the headers are available and skip it otherwise. Corresponding to flashrom svn r724. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 21:42:54 +0000