summaryrefslogtreecommitdiffstats
path: root/ft2232_spi.c
Commit message (Collapse)AuthorAgeFilesLines
* ft2232_spi: Add support for Tin Can Tools Flyswatter/Flyswatter 2Russ Dill2019-12-011-0/+6
| | | | | | | | | | | | | | | | The Tin Can Tools Flyswatter and Flyswatter 2 have a FT2232H with a JTAG interface wired to port A. The buffers that drive the JTAG pins need to be enabled with an nOE signal from the FT2232H ADBUS6 and ADBUS7 pins. Flyswatter has an ARM-14 JTAG interface and Flyswatter 2 has an ARM-20 JTAG interface. Change-Id: I56b1fb76dcda32bb02980cd54a2853506bfc9dfd Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/36896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* spi: Drop spi_controller typeNico Huber2019-06-271-1/+0
| | | | | | | | | | Not needed anymore. Drop it fast before it encourages anyone to violate layers again! Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651 Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ft2232_spi.c: Remove unneeded 'else'Elyes HAOUAS2019-06-211-6/+4
| | | | | | | | | | 'else' is not needed after a 'break' or 'return'. Change-Id: Ia4762d0c0601d56528de56658b869b62fbe5b263 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ft2232_spi: add an ability to use GPIO for chip selectionSergey Alirzaev2018-10-081-0/+17
| | | | | | | | Change-Id: I6db05619e0d69ad18549c8556ef69225337b1532 Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com> Reviewed-on: https://review.coreboot.org/28911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* spi_master: Introduce SPI_MASTER_4BA feature flagNico Huber2018-01-021-0/+1
| | | | | | | | | | | | | | | Add a feature flag SPI_MASTER_4BA to `struct spi_master` that advertises programmer-side support for 4-byte addresses in generic commands (and read/write commands if the master uses the default implementations). Set it for all masters that handle commands address-agnostic. Don't prefer native 4BA instructions if the master doesn't support them. Change-Id: Ife66e3fc49b9716f9c99cad957095b528135ec2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* ft2232_spi: Add support for Google Servo boards (v1 + v2)Todd Broch2016-02-141-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been cherry-picked from various patches in the chromiumos tree denoted below. Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65 Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808 Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is dedicated to supporting orginal Servo V1 functionality. The second, residing at USB ID 0x18d1:5003 provides two other SPI interfaces on port A and B respectively. Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko: - The clock divisor is set to '6', as this creates a 10MHz SPI clock, which is the same SPI clock that the chromiumos branch produced. - Add udev rule for Google servo boards to util/flashrom.rules. - Add Google servo entry to manpage. Corresponding to flashrom svn r1925. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Hatim Kanchwala <hatim@hatimak.me> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Hatim Kanchwala <hatim@hatimak.me> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 23Stefan Tauner2015-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - Elitegroup GF7050VT-M Reported by Alex - Fujitsu D2724-A1x (used in ESPRIMO E5625) Reported by Rainer Spillmann - Teclast X98 Air 3G Reported by Antonio Ospite Flash chips: - Fix MX25L6405(D) definition by splitting it. Reported by Reggie McMurtrey - Add Macronix MX25L..08E family and rearrange MX25L6436E. - Pm49FL004 to PREW (+EW) Reported by Georg Sauthoff Miscellaneous: - Add board enable for abit KN9 Ultra. - Mark ARM-USB-OCD as working OK. - Use "mobile devices" instead of "laptops" in output. - Tiny other stuff. Corresponding to flashrom svn r1886. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ftdi2232_spi: revert usage of DIS_DIV_5 macroStefan Tauner2015-01-251-1/+1
| | | | | | | | | | | | | | In r1872 we replaced some magic values with constant macros from ftdi.h. Among them was DIS_DIV_5 that represents the opcode that disables the use of the 5x prescaler on newer devices. Unfortunately this macro was only introduced with support for FT232H and hence is not available in older versions of the library. Revert back to using the magic constant. Corresponding to flashrom svn r1873. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi.c: use constants from ftdi.h instead of magic numbersAntony Pavlov2015-01-251-10/+20
| | | | | | | | | | Also, improve documentation of static variables cs_bits and pindir. Corresponding to flashrom svn r1872. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 21Stefan Tauner2014-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by luxflow@live.com using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-2/+2
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 20Stefan Tauner2014-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Corresponding to flashrom svn r1783. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: Add support for TUMPA LiteStefan Tauner2014-04-271-0/+6
| | | | | | | | | | | http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual Initial patch from Jadran Puharic <jpuharic@gmail.com>. Corresponding to flashrom svn r1781. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify usbdev_status and pcidev_status into dev_entryStefan Tauner2012-12-271-1/+1
| | | | | | | | | | | | | | | | | | | Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor PCI and USB device status printingStefan Tauner2012-12-271-13/+0
| | | | | | | | | | | | | | | | | To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices. Corresponding to flashrom svn r1631. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 15Stefan Tauner2012-10-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Foxconn P55MX http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html Tested flash chips: - Eon EN25F64 to PR (+PR) http://paste.flashrom.org/view.php?id=1426 - Macronix MX25L1005 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html - Set SST39VF512 to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html Tested chipsets: - Z77 (only reading was really tested) Miscellaneous: - Fix ft2232_spi's parameter parsing. - Fix nicrealtek's init (always segfaulted since r1586 oops). - Add another T60 variant to the laptop whitelist. - Improve message shown when image file size does not match flash chip - Refine messages regarding the flash descriptor override strap according to the findings by Vladislav Bykov on his P55MX. - Fix the ID of EN25F64. - Demote and clarify debug message in serprog_delay(). - Minor other cleanups. Corresponding to flashrom svn r1613. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Cleanup ft2322.c and add more detail to error messagesStefan Tauner2012-09-261-27/+17
| | | | | | | | | | | - Use libftdi's error string to add more detail. - Add full stops to messages. - Minor white space fixes. Corresponding to flashrom svn r1610. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for FT232HIlya A. Volynets-Evenbakh2012-09-261-1/+12
| | | | | | | | | | | | For older versions of libftdi we define TYPE_232H ourselves and this seems to be enough to get at least basic support (and we don't need more than that AFAICT). Corresponding to flashrom svn r1609. Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for all 4 possible channels to the ft2232_spi programmerStefan Tauner2012-09-261-19/+41
| | | | | | | | | | | | | Add a check to validate the selected channel/interface, which not even libftdi seems to do yet. This patch changes default behavior: the new default channel/interface is A. Also, this patch uses the word 'channel' in addition or in place of 'interface' where possible without too much hassle because it is the term FTDI uses. Corresponding to flashrom svn r1608. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow to select FTDI device by serial numberShik Chen2012-09-171-1/+3
| | | | | | | | | | | | Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d). Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68: http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68 Corresponding to flashrom svn r1599. Signed-off-by: Shik Chen <shik@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Some ISO C fixesCarl-Daniel Hailfinger2012-08-271-1/+3
| | | | | | | | | | | | | | | | | This patch just fixes a limited number of bits not conforming to c99 by using - __asm__ instead of just asm - {0} instead of {} for struct initialization - h_addr_list[0] instead of h_addr to access the host address in struct hostent - #include <strings.h> where needed (for ffs and strcasecmp) Based on a previous patch by Carl-Daniel. Corresponding to flashrom svn r1585. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Call ftdi_set_interface right after ftdi_init and before ftdi_usb_openIlya A. Volynets-Evenbakh2012-08-141-5/+4
| | | | | | | | | | | Else libftdi complains that it is impossible to set interface on an already open device since 1c5fa36b67bc30742eee94ed3e3648fcd4640f24 (which will probably end up in libftdi 0.21). Corresponding to flashrom svn r1573. Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Let the programmer driver decide how to do AAI transfersNico Huber2012-06-151-0/+1
| | | | | | | | | | | | | | | | Currently spi_aai_write() is implemented without an abstraction mechanism for the programmer driver. This adds another function pointer 'write_aai' to struct spi_programmer, which is set to default_spi_write_aai (renamed spi_aai_write) for all programmers for now. A patch which utilises this abstraction in the dediprog driver will follow. Corresponding to flashrom svn r1543. Signed-off-by: Nico Huber <nico.huber@secunet.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix setting the divisor in ft2232_spiIlya A. Volynets-Evenbakh2012-06-141-2/+2
| | | | | | | | | | The patch that should have improved the clock divisor setting in r1537 made it much worse: the divisor used was from an uninitialized buffer. Corresponding to flashrom svn r1542. Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi.c: add frequency divisor parameterSamir Ibradžić2012-05-151-17/+37
| | | | | | | | | | | | This adds an optional argument when using the ft2232_spi programmer to set the frequency divisor. The valid values for the divisor is any even integer between 2 and 131072. Corresponding to flashrom svn r1537. Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: fix arm-usb-ocd and arm-usb-ocd-hPaul Fertser2011-12-201-0/+4
| | | | | | | | | | | | These devices have an additional output buffer which is activated only by pulling ADBUS4 low. This patch was real-life tested with arm-usb-ocd; arm-usb-ocd-h should be the same (as it shares the same documentation). Corresponding to flashrom svn r1478. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-4/+8
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add support for the GOEPEL PicoTAP programmerSamir Ibradžić2011-10-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://www.goepel.com/en/jtagboundary-scan/hardware/picotap.html This device is actually a JTAG adapter, but since it uses standard FT2232 A interface pins, it can be easily used as SPI programmer (tested it here successfully). PicoTAP supports only 5V output, so one needs to reduce this to 3.3V in a same manner as DLP Design DLP-USB1232H, see http://flashrom.org/FT2232SPI_Programmer#DLP_Design_DLP-USB1232H for details. The PicoTAP pin-out is as follows: PicoTAP | SPI ---------+------- TCK | SCLK TMS | CS# TDI | SO TDO | SI /TRST | - GND | GND +5V | VCC, HOLD# & WP# after 3.3V regulator I managed to run PicoTAP in 10MHz, 15MHz and 30MHz modes (by forcing DIVIDE_BY), against SST25VF016B SPI flash, read/write/erase all worked fine (write seems somewhat slow). Corresponding to flashrom svn r1453. Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) supportUwe Hermann2011-10-141-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to TIAO/DIYGADGET for sponsoring a test device! This is an FTDI FT2232H based device which provides an easily accessible JTAG, SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips using flashrom. http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1 There are two SPI connectors (pin headers) on the board: SPI1, which is connected to the FT2232H's A interface, and SPI2, which is connected to the chip's B interface. Both can be used to flash SPI chips: flashrom -p ft2232_spi:type=tumpa,port=A flashrom -p ft2232_spi:type=tumpa,port=B The default interface is A, so for SPI1 you can also just write: flashrom -p ft2232_spi:type=tumpa I tested all operations on both interfaces, everything works fine. Corresponding to flashrom svn r1451. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove unneeded inclusions of chipdrivers.hStefan Tauner2011-08-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | This is related to the spi split patch as discussed in: http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364 the old commit (r914) log notes: "Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c" there still remain a few cases where chipdrivers.h is needed: dediprog.c (spi_read_chunked and spi_write_chunked) it87spi.c (due to spi_write_enable and spi_read_status_register) wbsio_spi.c (spi_programmer registration only) besides that, there are also non-spi files that do not need it. also, add flash.h to chipdrivers.h because it uses some types of it and remove flashchips.h from print.c Corresponding to flashrom svn r1414. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fixup of r1397Carl-Daniel Hailfinger2011-08-151-5/+10
| | | | | | | | | | | | | | - Mixing uninitialized and initialized local variables leads to confusion. - ft2232_spi error cases should have gotten some error handling, and that's the reason the curly braces were there. - Fixing typos/wording in some places would have been nice given that those places were touched anyway. Corresponding to flashrom svn r1413. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: add support for the Dangerous Prototypes Bus BlasterSteve Markgraf2011-08-121-0/+6
| | | | | | | | | | | | | | | | Add support for the Dangerous Prototypes Bus Blaster (v1/v2). The new model is called "busblaster". So far only v2 has been tested, but since both v1 and v2 emulate a Amontec JTAGKEY in the default configuration, it is assumed that v1 should work fine as well. Information about the Busblaster can be found at: http://dangerousprototypes.com/docs/Bus_Blaster Corresponding to flashrom svn r1412. Signed-off-by: Steve Markgraf <steve@steve-m.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-21/+14
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* ft2232_spi: Improve error handling, remove exit() callsUwe Hermann2011-07-211-14/+33
| | | | | | | | | | | | | | | | In order to make the ft2232_spi code more usable in libflashrom (e.g. from frontends/GUIs) there must not be any exit() calls in the code, as that would also terminate the frontend. Thus, replace all exit() calls with proper error handling code by returning a _unique_ negative error number, so that the frontend (and/or user/developer) can also know a bit more exactly _which_ error occured, not only _that_ an error occured. Also, call ftdi_usb_close() before returning due to errors. Corresponding to flashrom svn r1377. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Tadas Slotkus <devtadas@gmail.com>
* Add support for Olimex programmers to ft2232_spiPete Batard2011-06-111-2/+27
| | | | | | | | | | | - add support for Olimex' ARM-USB-TINY, ARM-USB-TINY-H, ARM-USB-OCD AND ARM-USB-OCD-H and adjust man page - minor string change ("First International Computer, Inc." -> "FIC") Corresponding to flashrom svn r1331. Signed-off-by: Pete Batard <pbatard@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Kill central list of SPI programmersMichael Karcher2011-05-111-3/+15
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-11/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the OpenMoko debug boards v2 and v3Alex Badea2010-11-101-2/+11
| | | | | | | | | | | | | | | Add support for the OpenMoko Neo1973/Neo FreeRunner debug board version 2 or 3 (vid:pid 1457:5118). The new type is called "openmoko". Information about the debug board can be found at http://wiki.openmoko.org/wiki/Debug_Board_v3 Corresponding to flashrom svn r1231. Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Use device-specific vendor ID in ftdi_usb_open() callAlex Badea2010-11-101-1/+1
| | | | | | | | | | | | | ft2232_spi ftdi_usb_open() is called with the constant FTDI_VID vendor ID. Fix it by using the programmer-type-dependent ft2232_vid variable, to allow programmers with other vendor IDs. Corresponding to flashrom svn r1230. Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ft2232_spi: allow 5x clock divisor to be set at runtimeAlex Badea2010-11-101-15/+22
| | | | | | | | | | | Check at init time whether the chip is a type 'H' (FT2232H or FT4232H). If not, omit the disable-divide-by-5 (0x8a) command which can confuse older chips. Corresponding to flashrom svn r1229. Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Retry short reads in ft2232_spiAlex Badea2010-11-101-5/+10
| | | | | | | | | | | It is possible that ftdi_read_data() returns less data than requested. Catch this case and retry reading the rest of the buffer. Corresponding to flashrom svn r1228. Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multiple unrelated changesCarl-Daniel Hailfinger2010-10-081-1/+1
| | | | | | | | | | | | | | | CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default. Wiki output was missing all flash chips if CONFIG_INTERNAL was not selected. Use correct type for toupper()/tolower()/isspace() functions. Specify software requirements in a generic way. Non-x86 compilation does not work with the default programmer set, so list the make parameters which result in a working build. Corresponding to flashrom svn r1203. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Refine -L output to include all programmer modulesCarl-Daniel Hailfinger2010-10-061-0/+1
| | | | | | | | | | | Flashrom -L output did not contain a list of programmers nor were all programmers listed. Fix it and mention at least the name of each programmer. Wiki output is unchanged, and will need separate fixups. Corresponding to flashrom svn r1199. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Quick fix for broken writes on FT2232H based programmersUwe Hermann2010-10-051-1/+1
| | | | | | | | | | | | | Not sure if this is the final/correct fix, but for now it definately fixes writes on FT2232H hardware. I have tested this on both, the DLP Design DLP-USB1232H, and the openbiosprog-spi hardware. Thanks to Joshua Roys <roysjosh@gmail.com> for the hint on IRC. Corresponding to flashrom svn r1190. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ft2232_spi: Cosmetic fixesUwe Hermann2010-07-291-38/+34
| | | | | | | | | | Various whitespace- and cosmetic fixes. Also, Use %04x:%04x for printing the USB IDs (which are 4 hex digits long), not %02x:%02x. Corresponding to flashrom svn r1123. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for the Amontec JTAGkey2Jörg Fischer2010-07-291-17/+82
| | | | | | | | | | | | | | | | | | | | | | Add support for the Amontec JTAGkey2, see http://www.amontec.com/jtagkey2.shtml http://www.amontec.com/jtagkey.shtml. This FTDI 2232H variant has an additional output enable, which will be set to its "on" (L) when CS is pulled low. But it lacks a power supply and you need an external 3.3V source. The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I only have a JTAGkey2 here for testing. Add all FT2232H/FT4232H based programmers to the list printed with flashrom -L Corresponding to flashrom svn r1119. Signed-off-by: Jörg Fischer <turboj@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use generic unlocking infrastructure for SPI chipsCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 15:31:33 +0000