summaryrefslogtreecommitdiffstats
path: root/nic3com.c
Commit message (Collapse)AuthorAgeFilesLines
* Mark 3COM "3C905B: Cyclone 10/100/BNC" as fully testedUwe Hermann2009-06-021-1/+1
| | | | | | | | | Also do some random cleanups while I'm at it. Corresponding to flashrom svn r567. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for the 10b7:9058 3COM NIC (3C905B: Cyclone 10/100/BNC)Maciej Pijanka2009-06-021-2/+3
| | | | | | | | | | | Also, add Atmel AT29C512 support. Both are tested on hardware by Maciej Pijanka. Corresponding to flashrom svn r566. Signed-off-by: Maciej Pijanka <maciej.pijanka@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Only probe for chips with compatible bus protocolsCarl-Daniel Hailfinger2009-06-011-0/+2
| | | | | | | | | | | | | | | | | | It doesn't make sense to probe for SPI chips on a LPC host, nor does it make sense to probe for LPC chips on a Parallel host. This change is backwards compatible, but adding host protocol info to chipset init functions will speed up probing. Once all chipset init functions are updated and the Winbond W29EE011 and AMIC A49LF040A chip definitions are updated, the W29EE011 workaround can be deleted as the W29/A49 conflict magically disappears. Corresponding to flashrom svn r560. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested on real hardware and Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Documentation improvements and small code/whitespace fixesUwe Hermann2009-05-191-5/+1
| | | | | | | Corresponding to flashrom svn r535. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Factor out fallback_map/unmap, most external programmers don't need and ↵Uwe Hermann2009-05-171-9/+0
| | | | | | | | | special handling here Corresponding to flashrom svn r531. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add proper workaround for 3COM 3C90xB cards, which need special fixups (the ↵Uwe Hermann2009-05-161-1/+25
| | | | | | | | | | | | | | | | 3C90xC ones don't) This is tested on hardware. Also, add initial support for the Atmel AT29C010A chip (which I inserted in a 3COM 3C90xB card for testing). It can be detected, read works, erase works, but write will need some additional code (will post in another patch later). Corresponding to flashrom svn r520. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Introduce a type "chipaddr" to abstract the offsets within flash regionsCarl-Daniel Hailfinger2009-05-161-4/+4
| | | | | | | | | | | | | | | | | | | Use chipaddr instead of volatile uint8_t * because when we access chips in external flashers, they are not accessed via pointers at all. Benefits: This allows us to differentiate between volatile machine memory accesses and flash chip accesses. It also enforces usage of chip_{read,write}[bwl] to access flash chips, so nobody will unintentionally use pointers to access chips anymore. Some unneeded casts are removed as well. Grepping for chip operations and machine memory operations doesn't yield any false positives anymore. Compile tested on 32 bit and 64 bit Linux. Corresponding to flashrom svn r519. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add generic 16 bit and 32 bit chip read/write emulation to the external ↵Carl-Daniel Hailfinger2009-05-161-18/+0
| | | | | | | | | | | | | flasher infrastructure The emulation works by splitting 32 bit accesses into 16 bit accesses and 16 bit accesses into to 8 bit accesses. That way, external flashers can mix and match the amount of emulation they need. Corresponding to flashrom svn r517. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Refactor parts of the 3COM NIC codeUwe Hermann2009-05-151-88/+12
| | | | | | | | | | | | | | | Move the reusable PCI specific parts into pcidev.c, they'll be usable for other NIC code (Realtek, VIA, ...) and also for SATA/IDE controller cards as external programmers (for every PCI device which can program EEPROMs basically). Also add print_supported_pcidevs() to show the supported PCI devices (currently only NICs, soon more) in the 'flashrom -L' output. Corresponding to flashrom svn r515. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Make the nic3com code check how many supported NICs are foundUwe Hermann2009-05-141-17/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we find multiple ones, abort with a message to the user, suggesting to use the flashrom -p nic3com=bb:dd.f syntax. If exactly one supported NIC is found, use it. If none is found, abort with an error. Print the bb:dd.f numbers for all supported NICs we find, so the user doesn't have to poke around in lspci output to find the desired bb:dd.f. Also, drop one pci_read_long() in favor of using the already existing base_addr[0] struct field. Drop the BAR in user messages, it's not really useful for us. Instead, explain the BDF syntax a bit more verbosely. While I'm at it, update the manpage some more to mention and fully document the external programmer support we have (or will have soon). The patch is tested on hardware: $ flashrom -p nic3com flashrom v0.9.0-r512 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 05:04.0) Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 05:03.0) Error: Multiple supported NICs found. Please use 'flashrom -p nic3com=bb:dd.f' to explicitly select the card with the given BDF (PCI bus, device, function). $ flashrom -p nic3com=05:04.0 flashrom v0.9.0-r512 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200, BDF 05:04.0) Calibrating delay loop... OK. Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000. No operations were specified. Corresponding to flashrom svn r513. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation of nic3com on 64bitCarl-Daniel Hailfinger2009-05-141-2/+2
| | | | | | | Corresponding to flashrom svn r512. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Unify usage of iopl-like code by introducing get_io_perms()Uwe Hermann2009-05-141-15/+4
| | | | | | | | | | Factor out portable iopl()-style code into a global function which all programmers can use, add missing close() call. Corresponding to flashrom svn r511. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* nic3com: allow selection of a particular PCI device to use as programmerChristian Ruppert2009-05-141-21/+47
| | | | | | | | | | | | Add support for users to specify a certain NIC via PCI bus:slot.func notation, in case there are multiple NICs in one system. Usage: flashrom -p nic3com=bb:ss.f Corresponding to flashrom svn r510. Signed-off-by: Christian Ruppert <spooky85@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix nic3com.c build issues on *BSDUwe Hermann2009-05-131-1/+7
| | | | | | | Corresponding to flashrom svn r501. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for 3COM NICs as "external programmer" and Atmel AT49BV512Uwe Hermann2009-05-131-0/+170
This allows flashrom to identify, read, write, erase and verify flash chips on (some) 3COM network cards. The patch uses the external programmer infrastructure, the network card is basically treated as an external flash programmer. Usage: $ ./flashrom -p nic3com flashrom v0.9.0-r498 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400 Calibrating delay loop... OK. Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000. No operations were specified. $ ./flashrom -p nic3com -E flashrom v0.9.0-r498 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400 Calibrating delay loop... OK. Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000. Erasing flash chip... SUCCESS. $ ./flashrom -p nic3com -wv backup.bin flashrom v0.9.0-r498 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400 Calibrating delay loop... OK. Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000. Flash image seems to be a legacy BIOS. Disabling checks. Programming page: 1023 at address: 0x0000ffc0 Verifying flash... VERIFIED. $ ./flashrom -p nic3com -r backup.bin flashrom v0.9.0-r498 Found NIC "3COM 3C905C: EtherLink 10/100 PCI (TX)" (10b7:9200), addr = 0xa400 Calibrating delay loop... OK. Found chip "Atmel AT49BV512" (64 KB) at physical address 0xffff0000. Reading flash... done. I have tested this on actual hardware (see PCI IDs above) and all operations worked fine. Support for other 3COM cards will follow (I added some more which should be supportable by this code, but they're untested so far), as well as support for NICs from other vendors. The patch also adds support for the Atmel AT49BV512 which is soldered onto the 3COM NIC I used for testing. Corresponding to flashrom svn r499. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Mateusz Murawski <matowy@tlen.pl> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 19:01:30 +0000