ALSA: hda - Add driver for Tegra SoC HDA

This adds a driver for the HDA block in Tegra SoCs.  The HDA bus is
used to communicate with the HDMI codec on Tegra124.

Most of the code is re-used from the Intel/PCI HDA driver.  It brings
over only two of the module params, power_save and probe_mask.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 28 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
new file mode 100644
index 000000000000..c26f8ca97023
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
@@ -0,0 +1,28 @@
+NVIDIA Tegra30 HDA controller
+
+Required properties:
+- compatible : "nvidia,tegra30-hda"
+- reg : Should contain the HDA registers location and length.
+- interrupts : The interrupt from the HDA controller.
+- clocks : Must contain an entry for each required entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+
+Example:
+
+hda@0,70030000 {
+	compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+	reg = <0x0 0x70030000 0x0 0x10000>;
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+		 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+	clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+	resets = <&tegra_car 125>, /* hda */
+		 <&tegra_car 128>; /* hda2hdmi */
+		 <&tegra_car 111>, /* hda2codec_2x */
+	reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+};